L3 FA5000 Manuel utilisateur
COMPONENT MAINTENANCE MANUAL
Model FA5000
23−70−30
Rev. 02
July 21/17
RECORDER PART NUMBERS:
COMPONENT MAINTENANCE MANUAL WITH
ILLUSTRATED PARTS LIST
P/N: 165E1689−02
IN ACCORDANCE WITH
FAA TSO−C123b
EUROCAE ED−112
ARINC CHARACTERISTIC NO. 757/757A
VENDOR CODE: 06141
MODEL FA5000
COCKPIT VOICE RECORDER
5013−5000−30
5013−5001−50
500−4030−000 RIPS
5003−5000−00
5003−5000−01
5003−5001−50
DISTRIBUTION STATEMENT: This document contains L3 Aviation Products privileged
information and must not, without prior written consent of L3 Aviation Products, be used or reproduced in
whole or in part, or communicated to any person except as authorized by L3 Aviation Products.
WARNING: This technical data is controlled under the Export Administration Regulations (EAR) ECCN
7E994, and may not be exported to a foreign person, either in the U.S. or abroad, without a license or
exception from the U.S. Department of Commerce.
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
Model FA5000
Rev. 02 Page ii
July 21/17
Title
23–70−30
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Model FA5000CVR
Rev. 02
July 21/17
This manual contains date sensitive information. To
verify the latest revision level of this manual, visit our
document download site at http://www.L−3ar.net.
ECopyright 2017 by L3 Technologies, Aviation
Products
End User Statement. This manual is intended for aircraft
owners and their designated agents for installation of
this product. No distribution to 3rd parties or resale of
this manual is permitted.
Inquiries should be addressed to:
L3 Technologies
Aviation Products
Technical Publications
100 Cattlemen Road
Sarasota, Florida 34232
(941) 371–0811
FAX: (941) 377–5591
CAGE Code 06141
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
Model FA5000
Rev. 02 Page iii
July 21/17
Title
23–70−30
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
GENERAL
This product and related documentation must be reviewed for familiarization with
safety markings and instructions before operation.
This instrument was constructed in an ESD (electro–static discharge) protected environ-
ment. This is because most of the semiconductor devices used in this instrument are
susceptible to damage by static discharge.
Depending on the magnitude of the charge, device substrates can be punctured or de-
stroyed by contact or mere proximity of a static charge. The results can cause degrada-
tion of device performance, early failure, or immediate destruction.
These charges are generated in numerous ways such as simple contact, separation of
materials, and normal motions of persons working with static sensitive devices.
When handling or servicing equipment containing static sensitive devices, adequate
precautions must be taken to prevent device damage or destruction.
Only those who are thoroughly familiar with industry accepted techniques for handling
static sensitive devices should attempt to service circuitry with these devices.
In all instances, measures must be taken to prevent static charge build–up on work sur-
faces and persons handling the devices.
BEFORE APPLYING POWER
Verify that the product is set to match the available line voltage and the correct
fuse is installed..
Servicing instructions are for use by service–trained personnel only. To avoid dangerous
electric shock, do not perform any servicing unless qualified to do so.
Adjustments described in the manual are performed with power supplied to the instru-
ment while protective covers are removed. Energy available at many points may, if con-
tacted, result in personal injury.
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
Model FA5000
Rev. 02 Page iv
July 21/17
Title
23–70−30
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
THIS PAGE IS INTENTIONALLY LEFT BLANK
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
Highlights
23–70–30
Rev. 02 Page v
July 21/17
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
HIGHLIGHTS
Pages which have been added or revised are outlined below, together with the highlights
of Revision 02.
Section Page Description
Title
List of FSB’s
Front Matter Revised pages to Rev. 02
Introduction Added references to the ULB CMM and I/O manuals. Updated docu-
ment references to current manuals.
Description &
Operation
Testing & Fault
Isolation
Replaced ULB testing procedure with references to the ULB CMM
and I/O manuals.
Automatic
Testing
Disassembly Added RIPS and equipment storage details.
Removed the ULB removal procedure and replaced with reference to
the ULB CMM and I/O manuals.
Assembly Referenced the ULB CMM and I/O manuals. Added RIPS condition-
ing steps, Product Support contact info, storage and shipping details.
Fit and Clear-
ances
Special Tools
and Test Equip-
ment
Updated the ADLP information with latest PC requirements.
Illustrated Parts
List and Schem-
atic Diagrams
Updated with 90−Day ULB equivalency.
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
Highlights
23–70–30
Rev. 02 Page vi
July 21/17
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
HIGHLIGHTS
Pages which have been added or revised are outlined below, together with the highlights
of Revision 01.
Section Page Description
Title
List of FSB’s
Front Matter
Introduction Added updated 90−day ULB details. Added new part numbers:
5013-5000-30, 5013-5001−50.
Description &
Operation
Testing & Fault
Isolation
Added updated 90−day ULB details..
Automatic
Testing
Disassembly Added RIPS and equipment storage details.
Assembly Added RIPS and equipment storage details.
Fit and Clear-
ances
Special Tools
and Test Equip-
ment
Illustrated Parts
List and Schem-
atic Diagrams
Added new part numbers: 5013-5000-30, 5013-5001−50.
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
Highlights
23–70–30
Rev. 02 Page vii
July 21/17
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
RECORD OF HIGHLIGHTS
Issue Revision Date of
Change
Comments
Initial Release Feb. 20/14 Initial Release of CMM. Includes all sections, in
ATA100 format.
Rev. 01 October 6/16 Added updated 90−day ULB details. RIPS condi-
tioning, new part numbers added: 5013-5000-30,
5013-5001−50
Rev. 02 July 21/17 Updated L3 company name, added ULB refer-
ence to CMM/I/O, added RIPS conditioning
steps, and shipping information.
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
Highlights
23–70–30
Rev. 02 Page viii
July 21/17
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
THIS PAGE IS INTENTIONALLY LEFT BLANK
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
July 21/17
Record of Revisions
23–70–30
Rev. 02 Page ix
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
RECORD OF REVISIONS
REV.
NO.
INSERTION
DATE
BY REV.
NO.
INSERTION
DATE
BY REV.
NO
INSERTION
DATE
BY
01 October 6/16 C.P.
02 July 21/17 C.P.
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
July 21/17
Record of Revisions
23–70–30
Rev. 02 Page x
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
THIS PAGE IS INTENTIONALLY LEFT BLANK
The document reference is online, please check the correspondence between the online documentation and the printed version.
Autres manuels pour FA5000
1
Ce manuel convient aux modèles suivants
6
Table des matières
Autres manuels L3 Enregistreur vocal
