Lütze LION microPLC Manuel utilisateur
Installation Instructions
LION
microPLC
LION-MICRO-PLC-CAN-16/8/2/1-LUE
802201
Version 03
09/13/2019
Lütze Transportation GmbH
Bruckwiesenstraße 17-19
D-71384 Weinstadt
Tel.: +49 (0) 7151 6053-545
Fax: +49 (0) 7151 6053-6454
Sales.Transportation@luetze.de
www.luetze-transportation.de
LION microPLC ▪ Content
Content
1 Introduction....................................................................................................... 4
2 General Information.......................................................................................... 5
2.1 Symbol Description...................................................................................................................... 5
2.2 Copyright ..................................................................................................................................... 5
2.3 Disclaim of Liability ...................................................................................................................... 6
3 Installation......................................................................................................... 7
3.1 MULTIPROG 5.5 Express ........................................................................................................... 7
3.2 eCLR and µPLC Add-On ............................................................................................................. 9
4 Configuration .................................................................................................. 13
4.1 Hardware Configuration............................................................................................................. 13
4.2 Ethernet Configuration............................................................................................................... 14
4.3 ProConOS ................................................................................................................................. 15
4.4 File Manager Total Commander ................................................................................................ 16
5 Getting In ......................................................................................................... 18
5.1 PC IP Address ........................................................................................................................... 22
5.2 Function Blocks and Firmware Libraries.................................................................................... 26
5.3 Example..................................................................................................................................... 27
6 Appendix ......................................................................................................... 30
6.1 Driver parameter........................................................................................................................ 30
6.2 Parameter of the serial interface................................................................................................ 33
6.3 Revision of the Document.......................................................................................................... 34
LION microPLC ▪ Introduction
4
1 Introduction
This manual is part of the LION microPLC (Part-No. 802201,
Type LION-MICRO-PLC-CAN-16/8/2/1-LUE). It contains important information
about the installation. Every step, which is necessary to use the microPLC, is
explained in this document.
▪ To avoid hazardous situations, read the manual before installing the product
and using it.This applies to every person who is getting in touch with the
product. Trained employees and experts, especially qualified persons who
have worked with similar products before, have to read and understand the
manual as well.
▪ Store the manual at a handy place. If selling, renting or in case of a divestiture
pass the manual to the authorize person.
LION microPLC ▪ General Information
5
2 General Information
2.1 Symbol Description
2.1.1 Safety Messages
The manual contains safety information, which is characterized by a signal word
in combination with a certain colour to indicate the warning level. The information
highlights possible dangers and gives instructions on how to avoid them.
2.1.2 Handling Notes
You will also find icons that indicate important information and action steps:
2.2 Copyright
This manual is intended for the operator and his staff. It is forbidden to give the
content to a third party, to duplicate, exploit or impart it. The Lütze Transportation
GmbH has to allow it explicit in writing.
General data, text, images and drawings are copyrighted and are liable to the
industrial property right. Contravention can be prosecuting criminally. The named
brands and product names in this document are trademarks or registered
trademarks by titleholder.
Indicates a dangerous situation which leads to death or serious injuries
if not observed.
Indicates a dangerous situation which can lead to death or serious
injuries if not observed.
Indicates a dangerous situation which can lead to slight or moderate
injuries if not observed.
Indicates a situation which could damage the product or the environment.
This information foresees injuries.
Indicates technically important information to operate the device safely.
Indicates the use of tools.
LION microPLC ▪ General Information
6
2.3 Disclaim of Liability
The manual was written under consideration of the applied standards, regulations
and the current state of technology.
The content is verified of accuracy. Discrepancies are not excluded. For those
discrepancies we disclaim liability. Applicable changes and additional information
will be in the next version of the manual.
The Lütze Transportation GmbH does not assume liability for any damages and
accidents of following reasons:
▪ Nonobservance of the manual
▪ Untrained and unqualified employees
▪ Non conventional use
▪ Non approved reconstructions and functional modifications of the product
▪ Using non original or non admitted parts or equipment
LION microPLC ▪ Installation
7
3 Installation
For installing the programming system MULTIPROG 5.5 Express you can follow
the listed steps in this chapter. They will help you to install this system
independently, so you can use the microPLC as soon as possible.
System Requirement
3.1 MULTIPROG 5.5 Express
The MULTIPROG 5.50 Setup is now installed.
MULTIPROG Express MULTIPROG Pro
Processor Min. 1,6 GHz (2 GHz recommended)
RAM Min. 1 GByte (2 GBytes recommended)
Hard Drive Min. 1 GByte (2 GBytes recommended) free memory
Communication TCP/IP
Operating System Windows 7 (32 Bit/64 Bit)
Windows 8/8.1 (32 Bit/64 Bit)
Install MULTIPROG 5.50 Setup
1. Open the link to the programming
system MULTIPROG 5.5 Express
on the website of the Lütze Trans-
portation GmbH. You can find the
link on the site of article 802201, the
microPLC, under the tab Down-
loads. Here you can find the link
once again: https://www.luetze-
transportation.com/catalogue/con-
trol-technology/vehicle-control-unit-
compact-control-unit-0-5/802201-
lion-microplc-0/.
2. There will pop-up a window, with
several data files. Open the setup-
file.
3. There is a need of special libraries
for the programming system MUL-
TIPROG 5.5 Express, which need
to be installed, so that the program
functions correctly. Click Install.
LION microPLC ▪ Installation
8
Install MULTIPROG 5.50 Express Build 10214 Setup
The program MULTIPROG 5.5 Express is now installed.
1. Click the Windows Installer Pack-
age MULTIPROG 5.50 to install the
setup.
2. Click Next to get to the End-User Li-
cense Agreement.
3. Read the End-User License Agree-
ment carefully. If you have accept
the terms in the License Agree-
ment, you can click Next.
4. Choose the file path, in which the
program MULTIPROG 5.5 Express
should be saved. The file path,
which is already listed, can be used.
But you can also choose any other
folder. If you have chosen a file
path, click Next.
5. Click Install to start the installation.
You can also switch back to one of
the previous screens to change en-
tries (Back) or cancel the setup
(Cancel).
6. Click Finish to complete the setup.
LION microPLC ▪ Installation
9
3.2 eCLR and µPLC Add-On
To program the microPLC correctly, you also need two further Add-Ons. These
are the eCLR Add-On and the µPLC Add-On. You can also find them in the folder,
which has been opened under the link at the beginning of the installation. With
this Add-Ons, there are specific adjustments for the microPLC on the
development environment MULTIPROG 5.5 Express.
First you install the eCLR Add-On. The microPLC works with a Phoenix Contact
ProConOS eCLR SPS-Runtime environment and uses the Common Intermediate
Language (CIL) of Microsoft. MULTIPROG 5.5 Express needs an CIL-
Codegenerator, which translates the SPS-project for the eCLR.
It‘s important to install the Add-Ons in the correct sequence.
First you must install the eCLR Add-On and secondly the µPLC Add-On.
Install eCLR Add-On
1. Open the installation package
ARMThumb2_LE_GCC3_eCL-
R_3.0.exe on your computer.
2. Close all other open Windows-pro-
grams before you start with the in-
stallation of the eCLR Add-On. If
you have closed them, click Next.
3. Read the license agreement care-
fully. If you have accept the terms in
the license agreement, you can
click Next.
4. Choose again a file path, where the
Add-On should be installed. Then
click Next.
Use the file path, which you have chosen for the installation of MULTIPROG 5.5
Express. The standard file path is: C:\Program Files (x86)\PHOENIX
CONTACT Software\MULTIPROG 5.50 Build 10214.
LION microPLC ▪ Installation
10
The eCLR Add-On is installed.
After you have installed the eCLR Add-On you can install the µPLC Add-On. With
the installation package of this Add-On there will be provided Ressource-Files for
the microPLC. Further there will be installed an example-project, which helps you
understanding the programming of the microPLC.
5. By installing the eCLR Add-On
there will also be installed the Visual
Studio and Visual C# Express Sup-
port, if they aren’t already installed
on your computer. Tick the box and
click Next.
6. Click Install to start the installation.
To cancel the installation, click Exit.
7. Click Finish to complete the instal-
lation.
8. After a successful installation, re-
start your computer.
Autres manuels pour LION microPLC
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Lütze Contrôleurs
