Kyocera KM-C2520 Manuel utilisateur

SERVICE

MANUAL

Published in April 2008

842FZ117

2FZSM067

Rev. 7

KM-C2520

KM-C3225

KM-C3232

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF

USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

It may be illegal to dispose of this battery into the municipal waste stream. Check with your local

solid waste officials for details in your area for proper disposal.

ATTENTION

IL Y A UN RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACEE PAR UN MODELE DE

TYPE INCORRECT. METTRE AU REBUT LES BATTERIES UTILISEES SELON LES INSTRUC-

TIONS DONNEES.

Il peut être illégal de jeter les batteries dans des eaux d’égout municipales. Vérifiez avec les fonc-

tionnaires municipaux de votre région pour les détails concernant des déchets solides et une mise

au rebut appropriée.

Revision history

Revision Date Replaced pages Remarks

1 April 21, 2006 1-5-25 -

2 June 8, 2006 1-2-5, 1-2-9 -

3 August 11, 2006 Overall revised -

4 February 7, 2007 CONTENTS, 1-1-3, 1-1-4, 1-2-1, 1-2-2, 1-2-5, 1-2-7

to 1-2-9, 1-2-12 to 1-2-20, 1-3-4, 1-3-5, 1-3-9,

1-3-18, 1-3-45, 1-3-53 to 1-3-56, 1-3-63, 1-3-89,

1-4-1, 1-4-3 to 1-4-9, 1-4-11, 1-4-14, 1-4-19, 1-4-20,

1-4-36, 1-4-37, 1-4-42, 1-4-46, 1-4-47, 1-4-49,

1-4-50, 1-4-57, 1-5-11, 1-5-18, 1-5-21, 1-5-26 to

1-5-40, 2-1-1, 2-1-3, 2-1-4, 2-1-6, 2-1-8, 2-1-11 to

2-1-13, 2-1-18, 2-2-2, 2-2-4, 2-2-6, 2-3-3, 2-3-4,

2-3-8, 2-3-9, 2-3-11, 2-4-3, 2-4-4, 2-4-8

5 April 25, 2007 CONTENTS, 1-3-3 to 1-3-6, 1-3-11, 1-3-16 to

1-3-22, 1-3-33 to 1-3-43, 1-3-47, 1-3-51, 1-3-57,

1-3-58, 1-3-61, 1-3-62, 1-3-65, 1-3-83, 1-3-86,

1-3-91 to 1-3-93, 1-4-3 to 1-4-9, 1-4-36, 1-4-39 to

1-4-62, 2-3-6, 2-3-18, 2-3-19, 2-4-2 to 2-4-14

6 July 18, 2007 1-2-12, 1-2-15, 1-3-95, 1-3-100, 1-4-22 -

7 April 25, 2008 CONTENTS, 1-5-2, 1-5-27 -

This page is intentionally left blank.

Safety precautions

This booklet provides safety warnings and precautions for our service personnel to ensure the safety of

their customers, their machines as well as themselves during maintenance activities. Service personnel

are advised to read this booklet carefully to familiarize themselves with the warnings and precautions

described here before engaging in maintenance activities.

Safety warnings and precautions

Various symbols are used to protect our service personnel and customers from physical danger and

to prevent damage to their property. These symbols are described below:

DANGER: High risk of serious bodily injury or death may result from insufficient attention to or incorrect

compliance with warning messages using this symbol.

WARNING: Serious bodily injury or death may result from insufficient attention to or incorrect compliance

with warning messages using this symbol.

CAUTION: Bodily injury or damage to property may result from insufficient attention to or incorrect

compliance with warning messages using this symbol.

Symbols

The triangle ( ) symbol indicates a warning including danger and caution. The specific point

of attention is shown inside the symbol.

General warning.

Warning of risk of electric shock.

Warning of high temperature.

indicates a prohibited action. The specific prohibition is shown inside the symbol.

General prohibited action.

Disassembly prohibited.

indicates that action is required. The specific action required is shown inside the symbol.

General action required.

Remove the power plug from the wall outlet.

Always ground the copier.

1.Installation Precautions

WARNING

• Do not use a power supply with a voltage other than that specified. Avoid multiple connections to

one outlet: they may cause fire or electric shock. When using an extension cable, always check

that it is adequate for the rated current. .............................................................................................

• Connect the ground wire to a suitable grounding point. Not grounding the copier may cause fire or

electric shock. Connecting the earth wire to an object not approved for the purpose may cause

explosion or electric shock. Never connect the ground cable to any of the following: gas pipes,

lightning rods, ground cables for telephone lines and water pipes or faucets not approved by the

proper authorities. ............................................................................................................................

CAUTION:

• Do not place the copier on an infirm or angled surface: the copier may tip over, causing injury. .......

• Do not install the copier in a humid or dusty place. This may cause fire or electric shock. ................

• Do not install the copier near a radiator, heater, other heat source or near flammable material.

This may cause fire. .........................................................................................................................

• Allow sufficient space around the copier to allow the ventilation grills to keep the machine as cool

as possible. Insufficient ventilation may cause heat buildup and poor copying performance. ...........

• Always handle the machine by the correct locations when moving it. ...............................................

• Always use anti-toppling and locking devices on copiers so equipped. Failure to do this may cause

the copier to move unexpectedly or topple, leading to injury. ...........................................................

• Avoid inhaling toner or developer excessively. Protect the eyes. If toner or developer is acciden-

tally ingested, drink a lot of water to dilute it in the stomach and obtain medical attention immedi-

ately. If it gets into the eyes, rinse immediately with copious amounts of water and obtain medical

attention. ......................................................................................................................................

• Advice customers that they must always follow the safety warnings and precautions in the copier’s

instruction handbook. .....................................................................................................................

2.Precautions for Maintenance

WARNING

• Always remove the power plug from the wall outlet before starting machine disassembly. ...............

• Always follow the procedures for maintenance described in the service manual and other related

brochures. .......................................................................................................................................

• Under no circumstances attempt to bypass or disable safety features including safety mechanisms

and protective circuits. .....................................................................................................................

• Always use parts having the correct specifications. ..........................................................................

• Always use the thermostat or thermal fuse specified in the service manual or other related bro-

chure when replacing them. Using a piece of wire, for example, could lead to fire or other serious

accident. ..........................................................................................................................................

• When the service manual or other serious brochure specifies a distance or gap for installation of a

part, always use the correct scale and measure carefully. ................................................................

• Always check that the copier is correctly connected to an outlet with a ground connection. .............

• Check that the power cable covering is free of damage. Check that the power plug is dust-free. If it

is dirty, clean it to remove the risk of fire or electric shock. ..............................................................

• Never attempt to disassemble the optical unit in machines using lasers. Leaking laser light may

damage eyesight. ...........................................................................................................................

• Handle the charger sections with care. They are charged to high potentials and may cause electric

shock if handled improperly. ............................................................................................................

CAUTION

• Wear safe clothing. If wearing loose clothing or accessories such as ties, make sure they are

safely secured so they will not be caught in rotating sections. ..........................................................

• Use utmost caution when working on a powered machine. Keep away from chains and belts. ........

• Handle the fixing section with care to avoid burns as it can be extremely hot. ..................................

• Check that the fixing unit thermistor, heat and press rollers are clean. Dirt on them can cause

abnormally high temperatures. ........................................................................................................

• Do not remove the ozone filter, if any, from the copier except for routine replacement. ....................

• Do not pull on the AC power cord or connector wires on high-voltage components when removing

them; always hold the plug itself. .....................................................................................................

• Do not route the power cable where it may be stood on or trapped. If necessary, protect it with a

cable cover or other appropriate item. .............................................................................................

• Treat the ends of the wire carefully when installing a new charger wire to avoid electric leaks. ........

• Remove toner completely from electronic components. ...................................................................

• Run wire harnesses carefully so that wires will not be trapped or damaged. ....................................

• After maintenance, always check that all the parts, screws, connectors and wires that were

removed, have been refitted correctly. Special attention should be paid to any forgotten connector,

trapped wire and missing screws. ...................................................................................................

• Check that all the caution labels that should be present on the machine according to the instruction

handbook are clean and not peeling. Replace with new ones if necessary. ......................................

• Handle greases and solvents with care by following the instructions below: .....................................

· Use only a small amount of solvent at a time, being careful not to spill. Wipe spills off completely.

· Ventilate the room well while using grease or solvents.

· Allow applied solvents to evaporate completely before refitting the covers or turning the power

switch on.

· Always wash hands afterwards.

• Never dispose of toner or toner bottles in fire. Toner may cause sparks when exposed directly to

fire in a furnace, etc. .......................................................................................................................

• Should smoke be seen coming from the copier, remove the power plug from the wall outlet imme-

diately. ............................................................................................................................................

3.Miscellaneous

WARNING

• Never attempt to heat the drum or expose it to any organic solvents such as alcohol, other than the

specified refiner; it may generate toxic gas. .....................................................................................

This page is intentionally left blank.

Autres manuels pour KM-C2520

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kyocera Photocopieuse

Kyocera

Kyocera DP-750 Manuel utilisateur

Kyocera

Kyocera ECOSYS P5021cdn Manuel utilisateur

Kyocera

Kyocera ECOSYS FS-C8500DN Manuel utilisateur

Kyocera

Kyocera TASKalfa 3050ci Manuel utilisateur

Kyocera

Kyocera FS-1028DP Manuel utilisateur

Kyocera

Kyocera KM-1620 Manuel utilisateur

Kyocera

Kyocera ECOSYS M6030cdn Manuel utilisateur

Kyocera

Kyocera KM-C850 Manuel utilisateur

Kyocera

Kyocera KM-1530 Manuel utilisateur

Kyocera

Kyocera C830 Manuel utilisateur

Kyocera

Kyocera KM-1635 Manuel utilisateur

Kyocera

Kyocera KM-1620 Manuel utilisateur

Kyocera

Kyocera KM-2560 Manuel utilisateur

Kyocera

Kyocera KM-6330 Manuel utilisateur

Kyocera

Kyocera FS-1060DN Manuel utilisateur

Kyocera

Kyocera KM-6230 Manuel

Kyocera

Kyocera KM-5530 Manuel utilisateur

Kyocera

Kyocera 5035 Manuel utilisateur

Kyocera

Kyocera TASKalfa 6550ci Manuel utilisateur

Kyocera

Kyocera Ri 4530 Copystar Manuel utilisateur

Kyocera

Kyocera FS-1018MFP Instructions de montage

Kyocera

Kyocera KM-2540 Manuel utilisateur

Kyocera

Kyocera KM-2810 Manuel utilisateur

Kyocera

Kyocera TASKalfa 265ci Manuel utilisateur

Manuels Photocopieuse populaires d'autres marques

Canon

Canon iR1210 Manuel de référence

Ricoh

Ricoh FW740 Manuel utilisateur

Minolta

Minolta CF910 Manuel utilisateur

Ricoh

Ricoh B003 Manuel utilisateur

Xerox

Xerox EC70 Manuel utilisateur

Oce

Oce 9800 Manuel utilisateur

Olivetti

Olivetti d-Copia 1800 Manuel utilisateur

Minolta

Minolta Di181 Manuel utilisateur

Canon

Canon iR5000i Manuel utilisateur

Telecrane

Telecrane F25 Manuel utilisateur

Xerox

Xerox WorkCentre Pro 40 Manuel utilisateur

Canon

Canon NP6317 Comment utiliser

Sharp

Sharp AR-5015 N Manuel utilisateur

Ricoh

Ricoh Di-C1 Manuel utilisateur

Mita

Mita MIP-2400 Manuel

Sharp

Sharp AL-2061 Manuel utilisateur

Muratec

Muratec MFX-C2280 Manuel utilisateur

Ricoh

Ricoh FT5034C Manuel utilisateur