Kumio ICM1221 Manuel utilisateur
THANK YOU FOR CHOOSING OUR ICE MAKER
PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATING
ICE MAKER
INSTRUCTION MANUAL
Model: ICM1221
IMPORTANT NOTICES
When using an electrical appliance, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and/or
injury, including the following:
1. Read all instructions before using.
2. Remove all packing material and carefully check your ice maker
to ensure it is in good condition and that there is no damage to
the ice maker or power cord and plug.
3. Before using the ice maker for the first time, please wait 2 hours
after positioning it, and keep the transparent lid open for at least 2
hours.
4. Pure water is not allowed to be used on this unit, spring water is
recommended.
5. Ensure the voltage is compliant with the voltage range stated on
the rating label, and ensure the earthing of the socket is in good
condition.
6. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.
7. Do not upend this product or incline it over a 45℃angle.
8. To protect against risk of electric shock, do not pour water on
cord, plug and ventilation, immerse the appliance in water or any
other liquid.
9. Unplug the appliance after using or before cleaning.
10.Keep the appliance 8cm from other objects to ensure the good
heat releasing.
11.Do not use the accessories which are not recommended by
manufacturer.
1
12.This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
13.Do not use the appliance close by flames, hot plates or stoves.
14.Do not switch on the power button frequently (ensure 5min.
interval at least) to avoid the damage of compressor.
15.Metal sheet or other electric objects are not allowed to be
inserted into the appliance to avoid fire and short circuit.
16.Do not use outdoors.
17.Never clean with scouring powders or hard implements.
18.Please keep the instruction manual.
19.Warning: Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
20.This appliance is intended to be used in household and similar
applications such as
–staff kitchen areas in shops, offices and other working
environments.
–farm houses and by clients in hotels, motels and other
residential type environments.
–bed and breakfast type environments.
–catering and similar non-retail applications.
21.When positioning the appliance, ensure the supply cord is not
trapped or damaged.
22.Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the appliance
2
23.The refrigerant and insulation blowing gas is flammable, when
disposing of the appliance, do so only at an authorized waste
disposal centre. Do not expose to flame.
This symbol indicates the refrigerant R600a and the
non-metallic materials of the appliance are flammable. It’s a warning
symbol. Warning: Risk of fire / flammable materials.
WARNING: When positioning the appliance, ensure the supply cord
is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable
power supplies at the rear of the appliance.
To avoid contamination of food, please respect the following
instructions:
–Opening the door for long periods can cause a significant increase
of the temperature in the compartments of the appliance.
–Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
–Clean water tanks if they have not been used for 48 h; flush the
water system connected to a water supply if water has not been
drawn for 5 days.
–If the refrigerating appliance is left empty for long periods, switch
off, defrost, clean, dry, and leave the door open to prevent mould
developing within the appliance.)
Regarding the information pertaining to the use of the appliance,
thanks to refer to the below paragraph of the manual.
3
SPECIFICATIONS
Model number: ICM1221
Daily ice output: 26 lbs.(12kg) / 24 hours
Ice storage capacity: 1.5L/600g
Refrigerant: R600a environmental friendly refrigerant
Compression-type refrigeration: 110-120V/60Hz
Water tank capacity: 1.5 L
Voltage: 110-120V~
Frequency: 60 Hz
Power consumption: 120 W
Max overall dimensions(W×D×H): 228X320X297mm
Packing dimensions(L×W×H): 392(L)×304(W)×366(H)mm
N.W.: 16.98LBS/7.7kg
G.W.:19.18LBS/8.7kg
4
DESCRIPTION
1. Micro switch support
2. Evaporator
3. Water Tray
4. Ice shovel board
5. Ice collecting tray
6. Water box
7. Control panel
8. Buttons
9. Front housing
10. Ice shovel
11. Top cover
12. Transparent lid
13. Motor Mount
14. Back housing
15.Air vent
10
9
8
7
6
5
4
1
15
14
11
12
13
3
2
5
FEATURE
Quick ice making
Prompt when the ice is full and water is insufficient
Bullet ice
9 pcs ice can be made in nine minutes
1. During transportation, do not tilt the machine more than 45
degrees, do not reverse the machine. This may damage the
compressor and the sealing system.
2. Remove all packing materials, check the machine carefully and
make sure that the machine, power cord and plug are normal.
3. The machine should be on a level surface. To ensure sufficient
ventilation, the distance of the back of ice maker to the wall
should be at least 150 mm, it should be away from the oven,
radiator or other heat source.
4. Before using the machine for the first time, place the machine
and leave the transparent cover open for at least two hours.
5. Make sure that the home voltage is consistent with the voltage
indicated by the machine.
6. Distilled water is not allowed. Mineral water is recommended.
6
CONTROL PANEL OPERATION
ICE FULL: Ice full alarm
ADD WATER: Water shortage alarm
ICE MAKING: Ice making
1) Plug in the power, the ICE MAKING indicator light flashes, and the
machine will start the deicing function. Press the POWER button, the
ICE MAKING indicator light is always on and then the ice block will
be made automatically. After the ice making is completed, the
deicing will be carried out, and then the ice shoveling function will be
entered, and so on.
2) ADD WATER: water shortage alarm
When the ADD WATER light turns red, it means that there is water
shortage in the water tank. You need to add water and press the
POWER button to restart the machine.
Power button
7
3) ICE FULL: Ice full alarm
When the ice reaches the maximum capacity of the ice storage
container, the ICE FULL light flashes, and the machine stops. At this
time, the ice needs to be poured out. When the ice position is lower
than the full sensor position, the machine will restart automatically.
4) ICE MAKING: Ice making
When this light is always on, it means that the ice maker is making
ice.
OPERATING INSTRUCTIONS
Step 1
Open the lid and take out the basket and add water to the reservoir.
Note: There is a maximum scale MAX in the reservoir. The water
should not exceed the MAX position. If the water exceeds the
maximum scale MAX, you need to open the bottom drain plug,
release the excess water, and cover with a transparent cover.
Step 2
Plug in the power and press the power button to start the machine.
1. The three cycles used for the first time, the ice produced is small
and irregular.
2. When the ice basket is full, please take out the ice immediately, do
not let the ice overflow the ice basket
8
Autres manuels pour ICM1221
1
Table des matières
Autres manuels Kumio Machine à glaçons
