flashes synchronously at a frequency of 1 second.
Standby function: When there is no operation for 30 seconds, the product automatically
stops the mode function and the indicator light stops flashing. The mode function can be
restored only when the knob is turned to the "OFF" position.
▲Jog function :Long press the jog key to enter the jog mode, the corresponding blue jog indicator
light is on, the other two function key indicators are off, stop flashing, and the motor works in jog mode.
Release the hand to stop the jog mode, the three blue indicator lights return to the flashing state, and the
motor stops working.
▲Ice crush function :Click the broken ice function button to enter the broken ice function. The
blue indicator light corresponding to the broken ice function will be on continuously, and the other two
function key indicators will go out and stop flashing. In the ice crushing mode, the motor works for 1/4
second and stops for 1/4 second for a total of 40 seconds. The first three cycles of the motor work at the
set minimum speed, and then gradually increase to the set maximum speed. After working for 40 seconds,
the ice crushing function is stopped, the three blue indicator lights return to the flashing state, and the
motor stops working. If you want to stop the ice crushing function in the middle, you only need to click the
ice crushing function button once to stop the ice crushing function, the three blue indicator lights will
resume flashing, and then click the ice crushing function button to re-enter the ice crushing function.
Remarks:If the ice breaking function is stopped halfway, the timer function will also stop,
press again to restart the timer. For example, when the ice crushing mode works to 20
seconds, the ice crushing mode is stopped, and the timing method is to restart 40 seconds
instead of the last 20 seconds plus the remaining 20 seconds for a total of 40 seconds.
▲Stirring function :Click the stirring function button to enter the stirring function. The blue
indicator light corresponding to the crushed ice function will stay on, and the other two function button
indicators will go out and stop flashing. The motor works continuously for 2 minutes in the stirring mode.
The working method is that the motor gradually increases from the set minimum speed to the set
maximum speed in the first 10 seconds, and then continues stirring for 1 minute and 50 seconds. When
working for 2 minutes, stop the stirring function, three blue indicator lights returns to blinking state, and the
motor stops working. If you want to stop the stirring function in the middle, you only need to click the
crushed ice function button once to stop the stirring function, the three indicator lights will flash, and then
click the stirring function button to re-enter the stirring function.
Remarks:The timing method is the same as that of crushed ice.
▲Custom function:When the knob is turned to the minimum position, it will enter the custom mode.
Under this function, the motor can be adjusted to work at any speed between the set maximum and
minimum speed. When the knob is adjusted to the maximum position, the motor works at the set
maximum speed, as shown in Figure 4. When the rotation is adjusted to the minimum position, the motor
works at the set minimum speed, as shown in Figure 3.
