KSIX BXOUTL1 Manuel utilisateur
SMARTLED
SET 4 OUTDOOR SMARTLED SPOTLIGHTS
User Manual
BXOUTL1
Technical information
Power: 18W
Input voltage: 220-240V/50-60 Hz
Power supply: 12V/3A mains adapter
Luminous flux: 900 lm
LED color: RGBIC+W (Warm white: 3000K)
Illumination angle: 120º
Water resistance: IP65 (Floodlight Strip and controller), IP44 (Mains adapter)
Temperature: -20ºC to +60ºC
Lifetime: 20.000h
Connectivity: WiFi and Bluetooth
Voice assistant: Amazon Alexa and Google Home
App: TuyaSmart and Smart Life
Dimensions: 6 cm (diameter) x 33 cm
Total length: 9,5 m
Material: ABS + PC
Weight: 1131 g
Box contents
1 x Strip with 4 spotlights
1 x Mains adapter
1 x Integrated controller
4 x Ground stakes (205*Ø20mm)
4 x Screws (stainless steel)
4 x Flat washers M4 (stainless steel)
4 x Spring washers M4 (stainless steel)
1 x User manual
1. INSTALLATION
Installation in the garden or on the ground:
Installation on a flat, rigid surface:
Smart life – Smart livingTuyaSmart
Note: Before proceeding with the installation, make sure that the protective cover of the
main adapter is fixed and screwed on correctly.
How to connect two strips
This device allows the connection of a second strip of 4 spotlights to reach a total length of
19m. This second strip is not included in this pack.
1. Disconnect the output cable from the controller.
2. Remove the end cap of the other set.
3. Connect both sets by joining the cables described above.
Note: Up to two devices can be connected to the adapter included in the box.
Integrated control functions – No connection required
Power on/o: Press the button 2 times.
Reset: Press the button for 6 seconds.
Change scene: Press the button 1 time.
2. Download the app
• To download the Tuya Smart or Smart Life app, tap on the App Store or Google Play
icon.
• You can also search the app in the App Store or Google Play.
3. Register
1. If you do not have an account on the App, register and log in with the verification code.
2. Enter your email address and click on “Get verification code”. Enter the verification code
that you will receive in your email.
3. Set the password and tap on “Done” to complete the registration.
4. Add your device
1. First, turn on the Bluetooth and WiFi on your phone.
2. Open the app and tap on “Add device” or “+” in the top right corner.
3. Connect the device to the network and switch it on by pressing the button on the
controller twice.
4. To initiate the App pairing, press the button on the controller for 6 seconds until it flashes
red.
5. Select your Smart device from the device list or use the automatic scan to find it straight
away.
6. Finally, select the 2.4 GHz WiFi network, add the network password and wait while the
app adds the device. Once it is added, tap on “Finished”.
Note:
1. For a correct synchronization with the mobile phone, it is necessary to accept all the
accesses requested by the app.
2. When linking your phone with the device for the first time, you must be connected to a
WiFi network. Make sure that the light flashes quickly and that the WiFi password you
have entered is correct. (The connection process may take several minutes, please be
patient).
3. After the first connection, you can use a new WiFi or mobile data to control the device at
any time and from any location.
4. Only compatible with 2.4 GHZ WLAN, Android 4.1 and above and iOS 8.1 and above. Do
not use 5G WiFi.
5. The first connection should be made close to the router to ensure a faster connection.
6. When connecting multiple devices to the WiFi network, do not place them too close
together as this may cause signal interference.
5. Control your device
• After a successful pairing, the device will be displayed on the “Devices” page. Click on
the device icon in order to access and control its functions.
• The first time you access the device configuration you will have to select the number of
spotlights incorporated in the strip. Make sure you select "4" and click "Confirm".
• Navigate through the app menus to control your device.
Color selection
To access the color control feature tap on the icon showing a bulb at the bottom of your
screen. The control of the color of the spotlights has three dierent features:
1. The first color feature lets you choose the color that you want the four spotlights to show.
To access the feature tap on the first icon on the right side of your screen.
You can also select the color white and its intensity.
2. The second color feature lets you choose dierent colors for each spotlight. To access the
feature tap on the second icon on the right side of your screen.
3. The third color feature lets you switch o each spotlight individually. To access the feature
tap on the third icon on the right side of your screen.
Scenario modes
• To show the scenario modes, tap on the icon showing a palette at the bottom of your
screen.
• In order to select one of the several scenario modes just tap on them.
• You can edit any scenario mode and choose the combination of colors that you like the
most. In order to do this tap on the icon showing three dots visible at the top right corner
of each scenario mode.
Synchronization with music
• To access the music synchronization feature tap on the icon showing a musical note at the
bottom of your screen.
• Once inside, choose one of the three features (Rhythm, Game and Romantic) by tapping
on the play icon. The lights will follow the music collected by the phone microphone and
will show dierent lights, colors and eects.
Plan countdowns and timers
· To access the planner, tap on the icon showing a sheet and a clock at the bottom of your
screen.
· This feature lets you set timers and countdowns in order to automatically switch on the
spotlights at a previously selected time.
· To set a countdown tap on “Countdown” and select the hour and the minute for your
countdown and tap on “Confirm”.
6. Voice Assistants
• To set up your voice assistants through the app, you will need to tap on the top right corner
and then tap on the “Edit” icon.
• From here you can permit access to third parties to control the spotlights, such as Alexa
and Google Home.
• You can adjust the brightness, change the color, or simply turn the spotlights on and o
with just a few words.
7. Device settings
• The App also allows you to configure other features of the spotlights, such as its name.
• To manage these other features, you will need to access the upper right corner and tap on
the "Edit" icon.
Table des matières
Langues :
Manuels Mettre en lumière populaires d'autres marques
Guangzhou Yinhe Lighting&Sound Equipment Factory
Guangzhou Yinhe Lighting&Sound Equipment Factory NE-204 Manuel utilisateur
LIVARNO home
LIVARNO home 375304 2101 Instructions originales
Cameo
Cameo CLQS40WW Manuel utilisateur
Leviton
Leviton Ellipsoid 5/50 Manuel utilisateur
Monacor
Monacor img Stage Line PARL-56PDX/CR Manuel utilisateur
Vector
Vector SL3AKV Manuel utilisateur
EuroLite
EuroLite Akku flat light 1 Manuel utilisateur
Commercial Electric
Commercial Electric SPTM-1401 Manuel utilisateur
Vision & Control
Vision & Control SLB-500-W5K7-P-SL Manuel utilisateur
Teknik
Teknik FLEXI Manuel utilisateur
Craftsman
Craftsman CMXLSB10 Manuel utilisateur
EuroLite
EuroLite LED SLS-144 UV Floor Spot Manuel utilisateur