KROHNE OPTIFLUX 2000 Manuel utilisateur
OPTIFLUX
2000/4000/5000
Electromagnetic
Flow Sensor
Flanged versions
for volumetric flowrate measurement
of electrically conductive liquids
General Items supplied
In-depth information please consult the
handbook, data sheet, special manuals
and certificates supplied on CD-ROM.
Installation, assembly, commissioning and
servicing must only be undertaken by
trained personnel. Maintenance which is
considered relevant to safety in the sense
of explosion protection must only be
carried out by the manufacturer, his
agents or under the supervision of
experts.
Visual check
Example
For use in hazardous areas, special
codes and regulations are applicable,
which are supplied in a separate
document that describes all hazardous
area relevant information.
Responsibility as to suitability and
intended use of this device rests solely
with the user. The supplier does not
accept any liability resulting from misuse
by the customer. Improper installation and
operation may lead to loss of warranty. In
addition, the "General conditions of sale",
found on the back of the invoice and
forming the basis of the purchasing
contract, are applicable.
If you need to return the device to the
manufacturer or supplier, please complete
the form given on the CD-Rom and attach
to the device. KROHNE regrets that it
cannot repair or check your device unless
accompanied by this completed form.
only separate version
GR
© KROHNE 01/2005 7.30946.32.00
Liner materials Electrode materials
PFA PFA HC4 Hastelloy C4
PTFE PTFE HB2 Hastelloy B2
PU Polyurethane Pt Platinum
Al2O3Fused aluminium oxide 316 Stainless steel
(ceramic) Ta Tantalum
ETFE ETFE Ti Titanium
PP Polpropylene HC4/LN LowNoise HC4
HR Hardrubber 316Ti / LowNoise, stainless steel
LN 1.4571
Quick Start
Quick Start OPTIFLUX 2000/4000/5000 2
OPTIFLUX 2000/4000/5000
Handling and installation instructions
min. 5 DN min. 2 DN
L max. – L min. ≤0.5 mm
L max.
L min.
3Quick Start OPTIFLUX 2000/4000/5000
OPTIFLUX 2000/4000/5000
Handling and installation instructions
Note: The min./max. temperatures for the compact devices are dependent on the liner / converter combination.
See data sheet.
Avoid strong
vibrations
>65°C / 150°F
Process
temperature
Ambient
temperature
min. max. with min. max. min. max. with min. max.
IFC 300 -40°C 140°C IFC 300 -40°F 284°F
IFC 010 -25°C 120°C IFC 010 -13°F 248°F
IFC 300 -40°C 120°C IFC 300 -40°F 248°F
IFC 010 -25°C 120°C IFC 010 -13°F 248°F
IFC 300 IFC 300
IFC 010 IFC 010
IFC 300 IFC 300
IFC 010 IFC 010
IFC 300 -40°C 120°C IFC 300 -40°F 248°F
IFC 010 -25°C 120°C IFC 010 -13°F 248°F
IFC 300 IFC 300
IFC 010 IFC 010
°C min. max. °F min. max.
IFC 300 -40 °C 65 °C IFC 300 -40°F 149°F
IFC 010 -25 °C 60 °C IFC 010 -13°F 140°F
Ambient temperatures
ETFE -40°F 248°F
Polyurethane
Polypropylene 23°F 194°F
149°F
23°F
°C °F
-5°C
Separate
Hardrubber 23°F 176°F
Compact
PTFE / PFA -40°F 356°F
90°C
Separate Compact
-40°C 180°C
120°C
80°C
65°C
120°C
-40°C
Polyurethane
Al2O3
Polypropylene
Process temperatures
PTFE / PFA
ETFE
Hardrubber
-5°C
-60°C
-5°C 194°F
23°F 149°F
Al2O3-76°F 248°F
23°F 176°F
23°F
Ambient temperatures
-5°C 80°C
-5°C 65°C
-5°C 90°C
Quick Start OPTIFLUX 2000/4000/5000 4
OPTIFLUX 2000/4000/5000
Special considerations
min. 5 DN
min. 2 DN
10 DN
≥5 m
5Quick Start OPTIFLUX 2000/4000/5000
OPTIFLUX 2000/4000/5000
Grounding
Metal pipelines, not internally coated. Grounding without
grounding rings.
Metal pipelines, with internal coating, and plastic pipelines.
Grounding with grounding rings.
Grounding rings
Torques and pressures
1) For ANSI pipe flanges the max. allowable
operating pressure is dependent on the
process temperature, see Technical Data on
CD-Rom.
2) Arrangement of gaskets, see Grounding.
3) Size of gaskets between grounding ring and
pipe flange see Dimensions in Technical
Data on CD-Rom.
4) The max. allowable torque is dependent on
the gasket material, 10 Nm = 7.38 ftlb.
5) Gaskets between grounding rings and meter
flange are special O-rings, see Spare Parts
on CD-Rom.
Max. Torque
Step 1: approx. 50% of max. torque
Step 2: approx. 80% of max. torque
Step 3: 100% of max. torque given in tables
above
Limits/Vacuum load
For general limits see instrument type plate!
Vacuum load only for PTFE and ETFE (Tefzel)
lined flowmeters; see manual for detailed information.
bar psig Nm ftlb
DN 150 DN 150 PN 16 ≤16 ≤230 148 109 5)
DN 200 DN 200 PN 10 ≤10 ≤145 183 135 5)
DN 250 DN 250 PN 10 ≤10 ≤145 158 117 5)
6" 6" 150 lb ≤20 ≤290 148 109 5)
8" 8" 150 lb ≤20 ≤290 183 135 5)
10" 10" 150 lb ≤20 ≤290 158 117 5)
Viton
OPTIFLUX 5000
Size of
measuring
tube
Max. allowable
torque
with gaskets made
of
2)
3)
4)
max. allowable
operating
pressure 1)
Rating /
Class
Pipe flanges
Meter
sizes
ANSI B 16.5
EN 10921
Quick Start OPTIFLUX 2000/4000/5000 6
OPTIFLUX 2000/4000/5000
Torques and pressure
All other liners
PFA,
PTFE
Polyurethane,
hardrubber,
ETFE
PFA,
PTFE
Polyurethane,
hardrubber,
ETFE
2,4 PN 40 4 × M 12 32 - 1/10 150 4 × 1/2"32 -
4 PN 40 4 × M 12 32 - 1/6 150 4 × 1/2"32 -
6 PN 40 4 × M 12 32 - 1/4 150 4 × 1/2"32 -
10 PN 40 4 × M 12 7,6 4,6 3/8 150 4 × 1/2"3,5 3,6
15 PN 40 4 × M 12 9,3 5,7 1/2 150 4 × 1/2"3,5 3,6
20 PN 40 4 × M 12 16 9,6 3/4 150 4 × 1/2"4,8 4,8
25 PN 40 4 × M 12 22 11 1 150 4 × 1/2"6,7 4,4
32 PN 40 4 × M 16 37 19 1 1/2 150 4 × 1/2"13 12
40 PN 40 4 × M 16 43 25 2 150 4 × 5/8"24 23
50 PN 40 4 × M 16 55 31 3 150 4 × 5/8"43 39
65 PN 16 4 × M 16 51 42 4 150 8 × 5/8"34 31
65 PN 40 8 × M 16 38 21 6 150 8 × 3/4"61 51
80 PN 10 8 × M 16 47 25 8 150 8 × 3/4"86 69
100 PN 16 8 × M 16 39 30 10 150 12 × 7/8"97 79
125 PN 16 8 × M 16 53 40 12 150 12 × 7/8"119 104
150 PN 16 8 × M 20 68 47 14 150 12 × 1" 133 93
200 PN 10 8 × M 20 84 68 16 150 16 × 1" 130 91
200 PN 16 8 × M 20 68 45 18 150 16 × 1 199 143
250 PN 10 12 × M 20 78 65 20 150 20 × 1 182 127
250 PN 16 12 × M 24 116 78 24 150 20 × 1 265 180
300 PN 10 2 × M 20 88 76 28 150 28 × 1 242 161
300 PN 16 12 × M 24 144 105 32 150 28 × 1 380 259
350 PN 10 16 × M 20 97 75 36 150 32 × 1 - 269
400 PN 10 16 × M 24 139 104 40 150 36 × 1 - 269
450 PN 10 16 × M 24 127 93
500 PN 10 20× M 24 149 107
600 PN 10 20 × M 27 205 138
700 PN 10 20 × M 27 238 163
800 PN 10 20 × M 30 328 219
900 PN 10 28 × M 30 - 205
1000 PN 10 28 × M 35 - 261
Nominal
size
DN mm
Pressure
rating
Bolts max. Torque
Nm
Note:
DN 2.5 / 4 / 6 / 10 have a DN 15 flange.
ANSI 1/10", 1/6", 1/4", 3/8" have a 1/2" flange.
max. Torque
Nm
Nominal
size
inch
Flange
class
lb
Bolts
Autres manuels pour OPTIFLUX 2000
2
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels KROHNE Accessoires
KROHNE
KROHNE OPTIFLUX 6000 Manuel utilisateur
KROHNE
KROHNE OPTIFLUX 4000 Manuel utilisateur
KROHNE
KROHNE SMARTPAT PH Manuel utilisateur
KROHNE
KROHNE OPTIFLUX 6000 Manuel utilisateur
KROHNE
KROHNE OPTIFLUX 1000 Manuel utilisateur
KROHNE
KROHNE OPTIFLUX 6000 Manuel utilisateur
KROHNE
KROHNE OPTISWITCH 5200C Manuel utilisateur
KROHNE
KROHNE OPTISENS IND 1000 Manuel utilisateur
KROHNE
KROHNE OPTIFLUX 6000 Manuel utilisateur
KROHNE
KROHNE OPTIFLUX 4000 Manuel utilisateur
KROHNE
KROHNE SMARTPAT COND 1200 Manuel utilisateur
KROHNE
KROHNE OPTISENS ODO2000 Manuel utilisateur
KROHNE
KROHNE OPTIFLUX 6000 Manuel utilisateur
KROHNE
KROHNE SMARTPAT ORP Manuel utilisateur
KROHNE
KROHNE 1000 Series Schéma de câblage
KROHNE
KROHNE SMARTPAT ORP 8150 Schéma de câblage
KROHNE
KROHNE SMARTPAT PH 8530 Manuel utilisateur
KROHNE
KROHNE SMARTPAT ORP 8150 Schéma de câblage
KROHNE
KROHNE OPTIFLUX 6000 Manuel utilisateur
KROHNE
KROHNE OPTIMASS 6000 Manuel utilisateur
