KREAFUNK Asound Manuel utilisateur

aSOUND

Operation manual

Bedienungshandbuch

Manual de instrucciones

Manuel d’utilisation

Brugermanual

Portable Bluetooth Speaker Box

English 4

Deutsch 16

Español 16

Français 22

Dansk 28

This product is in compliance with the essential requirements and other relevant

provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at:

www.kreafunk.com/declaration-of-conformity/

FCC-ID: 2ACVCKREAFUNK2

4English

English

Operation manual

English

1. Buttons

Power

Bluetooth

Play / Pause / Handfree

Volume –

Volume +

6English

2. Charge aSOUND

1. Connect aSOUND with AC

adapter directly (included).

2. Red LED turns ON during

charging, turns OFF when fully

charged.

3. Unplug AC adaptor when fully

charged.

Note:

The Red LED will ash and make

a sound when the battery power is

low (<21%).

3. Starting aSOUND Blue-

tooth Speaker

1. When fully charged, hold down

the POWER button to turn on

the speaker.

2. aSOUND is on standby mode

after power-on if the blue LED

blinks quickly.

3. aSOUND will turn o for power

saving if it is not in use in 10

minutes.

4. Press any button located on the

top to activate aSOUND from

standby mode.

5. To manually turn o aSOUND

Speaker, hold down the POWER

button.

4. Pairing with Bluetooth

enabled devices

(Mobile phones/Tablets etc.)

1. Keep the speaker and device

within 1 meter of each other.

2. Hold down the power button

for 2 seconds to turn on the

speaker, the LED indicator will

blink quickly in blue while the

speaker enters search mode.

3. Start the Bluetooth function on

your mobile device and look

for “aSOUND” in the Bluetooth

device list (depending on the

Bluetooth version of your

device you may have to enter

the pass code ‘0000’).

4. After successfully connecting,

the LED will change to solid

blue.

Note:

English

• If the pairing was not

successful, turn o the

speaker and re-pair again.

• After successful pairing,

paired devices will remember

each other so there is no

need to pair again unless

pairing information is deleted.

• To pair with a new device,

just follow steps 1-4 above

after un-pairing the existing

device.

5. Re-connecting to a

paired device

If the speaker does not connect to

the last used device automatically,

then you will need to select it

manually from the list of devices on

your mobile device.

6. Pair aSOUND with a

dierent device

First disconnect with existing

device by either holding down the

BLUETOOTH button or switching

o the Bluetooth connection for the

existing device, and then pair with

other device according to steps

1-4 above.

7. Hands-free phone calls

Make sure mobile phone is paired

with speaker.

1. Press the “Bluetooth/Hands-

free” button to answer an

incoming phone call.

2. Press again to end a call.

3. Use the volume buttons to

change the volume of the call.

8. Play / Pause

1. When the speaker is playing

music, press the Play /Pause/

Handfree quickly to pause.

2. Press again to continue play.

9. Next / Previous

1. Press NEXT to go to next track.

2. Press Previous to go to

previous track.

8English

10. Volume control

1. Control volume via the

Bluetooth device itself.

2. Control volume via the volume

+/- buttons located on top of

Speaker.

11. Connecting external

devices (AUX port)

You can connect any music device

to the aSOUND speaker via the AUX

port using the cable included. The

speaker will not use the Bluetooth

function while connected via this

cable.

12. 1-Pair-2 function

(Stereo option)

When you buy 2 aSOUND, then

you can enjoy the stereo sound by

connecting 2 together.

Note:

Please ensure to pair 2 aSOUND

rstly, then to pair the master one

with your BT device to enjoy the

music.

1. Turn on 2 aSOUND speakers

and make sure both are under

BLUETOOTH mode.

2. Press and hold the

“BLUETOOTH + PREVIOUS”

button at the same time on

both units until you hear a “du

~ du ~” sound from both. The

devices will then start to search

for one another.

3. When “du ~ du ~” sound is

heard from both speakers, and

LED light changes to constant

(not ashing), the two speakers

are connected.

4. Now, Press the “BLUETOOTH”

button of either one of them to

be the

master one, until the LED indicator

of “BLUETOOTH” button blinks

quickly (another one is the

secondary one automatically

with LED indicator solid).

5. While the LED indicator of

master one blinks, it’s ready to

be research by other device.

6. Start the Bluetooth function on

English

your mobile device and look for

“KREAFUNK” in the Bluetooth

device list (depending on the

Bluetooth version of your

device you may have to enter

pass code ‘0000’).

7. After successfully connected,

the LED will change to solid

Warm-White.

8. Now you can start to enjoy the

STEREO Hi-Fi sound with 2

aSOUND.

Note:

The master one can control the

volume-/+ & track previous/next

function for both at the same time,

but the secondary only can adjust

the volume-/+.

10 Deutsch

Deutsch

Bedienungshandbuch

Autres manuels pour Asound

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels KREAFUNK Intervenants

KREAFUNK

KREAFUNK amove Manuel utilisateur

KREAFUNK

KREAFUNK aGlow Manuel utilisateur

KREAFUNK

KREAFUNK AGROOVE Manuel utilisateur

KREAFUNK

KREAFUNK aGO Stone Manuel utilisateur

KREAFUNK

KREAFUNK bshelf 1.1 Manuel utilisateur

KREAFUNK

KREAFUNK aCOUSTIC Manuel utilisateur

KREAFUNK

KREAFUNK aMAJOR Manuel utilisateur

KREAFUNK

KREAFUNK aGlow Manuel utilisateur

KREAFUNK

KREAFUNK amove Manuel utilisateur

KREAFUNK

KREAFUNK Agem Manuel utilisateur

KREAFUNK

KREAFUNK aOWL Manuel utilisateur

KREAFUNK

KREAFUNK aGlow Manuel utilisateur

KREAFUNK

KREAFUNK amove Manuel utilisateur

KREAFUNK

KREAFUNK Asound Manuel utilisateur

KREAFUNK

KREAFUNK AGROOVE Manuel utilisateur

KREAFUNK

KREAFUNK aCAPPELLA Manuel utilisateur

KREAFUNK

KREAFUNK aCUBE Manuel utilisateur

KREAFUNK

KREAFUNK aGO Manuel utilisateur

KREAFUNK

KREAFUNK tRadio Manuel utilisateur

KREAFUNK

KREAFUNK aOWL Manuel utilisateur

KREAFUNK

KREAFUNK aJAZZ Manuel utilisateur

KREAFUNK

KREAFUNK aGROOVE mini Manuel utilisateur

KREAFUNK

KREAFUNK KREAFUNK aFUNK Manuel utilisateur

KREAFUNK

KREAFUNK aGlow Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur