Kranzle D 16/220 Manuel utilisateur

Operating manual

Read and conform

safety instructions

before use

High pressure cleaners

D 16/220

Description

technical

specifications

D 16/220

10 - 220 bar

240 bar

at 1800 rpm

16 l/min

70 °C

2,5 m

10 m

15 m

Yanmar L100AE-S

26 kg

103 dB(A)

2,2 m/s²

approx. 38 Nm

Permissible tolerance for figures ± 5 % in accordance with VDMA uniform sheet 24411

operating pressure,

steplessly adjustable

permissible

overpressure

water output

hot water input up to

suction height

high pressure hose

with hose drum

engine

weight

Guaranteed sound

level LWA

Vibrations at lance

recoil at lance

Dear Customer

We would like to congratulate you on your new portable/mobile high

pressure cleaner and to thank you for the purchase.

To ease your introduction to the use of the cleaner, we have provided the

following pages of explanations, tips and hints.

The equipment will assist you professionally in all cleaning tasks, e.g.:

- facades

- flagstones

- terraces

- vehicles of oll

types

- sheds

- channels

- barrels and

containers

- machines

- streets

Item

water

6 Injector for cleaning agents

7 High pressure hose

8 Spray gun assembly

9 Interchangeable lance

10 Regulator nozzle

1 Water inlet connection with filter

2 Suction hose with filter

(special accessory) order No. 15.038 3

3 High pressure pump

4 Pressure gauge with glycerin filling

5 Unloader valve - safety valve

TheKRÄNZLED16/220-highpressurecleaners

aremobilemachines. The design can beseenfrom the diagram.

Construction

DescriptionDescription

Description

The machine can only be operated when the safety trigger is squeezed.

When the lever ist squeezed, the spray gun opens. The liquid is then pumped to the

nozzle. The spray pressure increases and quickly reaches the selected operating

pressure.

When the trigger ist released, the trigger gun closes and any further spraying of

liquid from the lance ist stopped.

The increase in pressure when the trigger gun is closed causes the unloader valve-

safety valve to open. The pump remaines switched on and continues to pump liquid

through the pump at reducated pressure.

When the trigger gun ist opened, the unloader valve - safety valve closes and the

pump ressumes pressure spraying from the lance.

The trigger gun is a safety device. Repairs should only be performed by

qualified persons. Should replacement parts be required, use only

components authorized by the manufacturer.

Lance with trigger gun

The unloader valve - safety valve protects the machine from a build-up of excess

pressure, and is designed not to permit an excess pressure to be selected for

operating. The limit nut on the handle is sealed with a spray coating.

The operating pressure and spray rate can be steplessly adjusted by tuning the

handle.

Replacements, repairs, new adjustments and sealing should only be

performed by qualified persons.

Unloader valve - safety valve

Environmental, refuse disposal and water protection

regulations must be observed !

Water - and Cleang - Care System

Water can be connected at mains pressure to the high pressure pump or it can be

sucked directly from a storage tank.

The water is then forced under pressure by the high pressure pump to the lance.

The high pressure jet is formed by the nozzle at the end of the lance.

Cleaning and caring agents can be mixed with the water by a low pressure injector.

DescriptionDescription

Description

DescriptionDescription

Description

For the motor follow the YFor the motor follow the Y

For the motor follow the Yanmaranmar

anmaranmar

anmar

operating manual onlyoperating manual only

operating manual only..

Motor-safety:

(see Yanmar operating manual)

Yanmar motors are safe and reliable if they are operated correctly. Read the

operating manual carefully before using the motor and try to understand the

contents of the manual completely.

Not following this advice could lead to injuries or damage of the

equipment.

To avoid a possible fire hazard and to ensure the necessary ventilation

the motor has to be operated at a distance of at least 1 m from buildings

and objects. Inflammable objects have to be kept away from the

surrounding area of the motor.

Children and pets have to be kept away from the motor, as there is a

danger of suffering burns from hot motor parts and to be injured by

equipment driven by the motor.

Get to know the motor and especially learn how to switch it off quickly.

Do not allow persons to operate the motor who are not familiar with it.

When running your high pressure cleaner with hot water of 70°C raised

temperatures occur.

Do not touch the machine without safety gloves.

CAUTION !

Never use liquid containing solvents such as paint thinners, petrol, oil or

similar liquid matter. Pay attention to the instructions of the

manufacturers of the cleaning agents. The seals in the

machine are not resistant to solvents. The spray of solvents is

inflammable, explosive and poisonous.

Neither set up and operate the machine in rooms where there is a risk of

fire or explosion nor put it into puddles. Do not use the machine under

water.

CAUTION !

Setting up: Location

DescriptionDescription

Description

Brief operating instructions

1. Connect the high pressure hose with spray gun

and machine.

2. Connect the suitable water supply.

3. Flush the air from the pump (open and close the spray gun

several times).

4. Switch on the motor while the spray gun is open and commence

cleaning.

5. After completing the work, completely empty the pump

(switch the motor on for approximately 20 seconds without the

suction and pressure hose).

Afterwards you can roll up the high pressure hose.

- Only use clean water ! Protect from frost !

CAUTION !

Please pay attention to the regulations of your waterworks company.

In accordance with EN 61 770, the machine may not be directly connected to the

public drinking water supply lines.

A brief connection however ist permissible according to DVGW (German

Association for Gas and Water Affairs) if a tube ventilator with check valve

(KRÄNZLE Order-No. 41.016 4) is built into the water supply.

Also indirect connection to the public drinking water supply lines is permissible by

way of free emission in accordance with EN 61 770; e.g. by using a reservoir with a

float valve.

Direct connection to a non-drinking water supply line is permissible.

High pressure hose and spray device

The high pressure hose and spray device supplied with the machine are made of

high grade material, they are also optimized for the machine and marked as

required by the appropriate regulations.

If replacement parts are required, only such parts that are authorized by

the manufacturer and which bear the markings required by the

appropriate regulations may be used. The high pressure hose and spray

device must be connected in a pressure-tight manner. The high pressure

hose may not be driven over, pulled excessively, or twisted. The hose

may under no circumstances be pulled over sharp edges, since

otherwise the guarantee is automatically void.

Always aim the

underbody lance. Note

when using an angle

underbody lance, like

for example lance

No. 41.075, that there

is a certain amount of

torque (twisting

motion) in the recoil.

(See also notice on

page 2).

As to the recoil -

see notice on page 2.

Apply the safety catch on the

spray gun after each use, in

order to prevent

unintentional spraying.

Safety notesSafety notes

Safety notes

This is what you´ve purchased :This is what you´ve purchased :

This is what you´ve purchased :

1. Spray lance with regulator and

high pressure nozzle, flat spray

2. Spray gun with insulated pistol

grip and screw connection

3. KRÄNZLE - High pressure cleaner

D16/220

4. High pressure hose 10 m

15 m HP-hose for cleaners

with hose drum

5. Operating instructions pump

Operating instructions motor

6. Water inlet components

1. Oil-measuring stick

Prepare for usePrepare for use

Prepare for use

2. Connect the high pressure

lance to the spray gun.

3. Unwind the high pressure hose

without leaving kinks or "nooses"

and connect it to the spray gun and

pump. When using extension

hoses, use max. 20 m high

pressure hose, or 2 x 10 m with

hoseconnectors.

The high pressure hose

connected from the machine to

the lance.

Water

CAUTION !

5. Maximum induction height 2.5 m

- see technical data

on page 2.

Please make

sure that the filter is

clean before using

your

high pressure cleaner.

4. The machine can be connected

to a pressurised water line with cold

or 60 °C respectively 70 °C hot water

(see page 2).

Ensure that the water supply ist clean

when sucking from external sources.

The hose cross section must be

at least 1/2" = 12.7 mm (free

passage). Filter 1 must

always be clean.

Preparation for usePreparation for use

Preparation for use

When running your high pressure cleaner with hot water of 70°C raised

temperatures occur.

Do not touch the machine without safety gloves.

Table des matières

Autres manuels Kranzle Nettoyeur haute pression

Kranzle

Kranzle 122 Silent Manuel utilisateur

Kranzle

Kranzle K1622TS Manuel utilisateur

Kranzle

Kranzle W 11/135 Instructions d'installation

Kranzle

Kranzle 105 Manuel utilisateur

Kranzle

Kranzle K115 Manuel utilisateur

Kranzle

Kranzle B 170 T Manuel utilisateur

Kranzle

Kranzle Therm 870-1 Manuel utilisateur

Kranzle

Kranzle WS 700 TS Manuel utilisateur

Kranzle

Kranzle 602 E-M 18 Manuel utilisateur

Kranzle

Kranzle junior 120 Manuel utilisateur

Kranzle

Kranzle bully 1000 TST Manuel utilisateur

Kranzle

Kranzle WS 800 TS Manuel utilisateur

Kranzle

Kranzle 1120 T Manuel utilisateur

Kranzle

Kranzle W 11/135 Manuel utilisateur

Kranzle

Kranzle 2170TST Manuel utilisateur

Kranzle

Kranzle B 10 200 Manuel utilisateur

Kranzle

Kranzle K1622 Manuel utilisateur

Kranzle

Kranzle Profi 160 TST Manuel utilisateur

Kranzle

Kranzle Profi 175 TST Manuel utilisateur

Kranzle

Kranzle 11/130 Manuel utilisateur

Kranzle

Kranzle 1120 T Manuel utilisateur

Kranzle

Kranzle 1122 TS T Manuel utilisateur

Kranzle

Kranzle X A15 TST Manuel utilisateur

Kranzle

Kranzle K 1050 P Manuel utilisateur

Manuels Nettoyeur haute pression populaires d'autres marques

Shark

Shark RG-232637 Manuel utilisateur

Shakti Technology

Shakti Technology S3 Manuel utilisateur

Kärcher

Kärcher K 4 Pure Manuel utilisateur

Porter-Cable

Porter-Cable D25806-025-2 Manuel utilisateur

REM POWER

REM POWER HDEm 662 Manuel utilisateur

Landa

Landa HS-3000 Manuel utilisateur

Craftsman

Craftsman 580.752270 Manuel utilisateur

HIKOKI

HIKOKI AW 100 Manuel utilisateur

Delco

Delco DC 1302 Manuel utilisateur

Kärcher

Kärcher K 3 Full Control Manuel utilisateur

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Manuel utilisateur

ARKSEN

ARKSEN 014-HG-14141-HR Manuel utilisateur

Black & Decker

Black & Decker PW1700SPX Manuel utilisateur

Kärcher

Kärcher 595 - SPARE Mode d’emploi

Stihl

Stihl RE 90 Manuel utilisateur

Husky

Husky HU80911 Manuel utilisateur

PowR-Quip

PowR-Quip PQ-2600 Manuel utilisateur

Hotsy

Hotsy 5645 Manuel utilisateur