Kramer SPK-CC678 Manuel utilisateur

Kramer Electronics, Ltd.

USER MANUAL

Models:

SPK-CC678, Closed-back Ceiling Speakers

SPK-CCV448, Closed-back Ceiling Speakers

SPK-CCV444, Closed-back Ceiling Speakers

Contents

1Introduction 1

2Getting Started 1

3Overview 2

4Your Closed-back Ceiling Speakers 3

5Installing the Closed-back Ceiling Speakers 6

5.1 Choosing the Best Location 6

5.2 Cutting the Ceiling Tile 7

5.3 Mounting the Speakers 8

5.4 Painting the Speaker 10

6Technical Specifications 11

Figures

Figure 1: Closed-back Ceiling Speakers in a Boardroom Setup 2

Figure 2: SPK-CC678 Closed-back Ceiling Speaker 4

Figure 3: SPK-CCV448 / SPK-CCV444 Closed-back Ceiling Speaker 4

Figure 4: Closed-back Ceiling Speaker Schematic Diagram 6

Figure 5: Installing the Closed-back Ceiling Speakers 8

Figure 6: Plugging and Securing the Cable 9

Figure 7: Tighten the Mounting Tabs 9

Figure 8: Adjust Tap Selector (for the SPK-CC678) 10

Tables

Table 1: Closed-back Ceiling Speakers – Definition 2

Table 2: Closed-back Ceiling Speakers Hardware Items 5

Table 3: Ceiling Mounting Kit Items 5

Table 4: Technical Specifications of the SPK-CC678 11

Table 5: Technical Specifications of the SPK-CCV448 and the SPK-CCV444 11

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast

range of problems that confront the video, audio, presentation, and

broadcasting professional on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better! Our

1,000-plus different models now appear in 11 groups1

Congratulations on purchasing your Kramer Closed-back Ceiling Speakers,

which are available in three models: SPK-CC678, SPK-CCV448 and

SPK-CCV444,and are ideal for:

that are clearly defined

by function.

•Conference rooms, classrooms and training rooms

•Boardrooms

•Hotel lobbies

•Presentation venues

The package includes the following items:

•SPK-CC678, and/or SPK-CCV448 and/or SPK-CCV444

•Mounting kit

•This user manual2

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance cables3

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;

GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;

GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products

2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com

3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

3 Overview

The Closed-back Ceiling speakers consist of a pair of high performance

closed back speakers. The pair can be mounted on the ceiling, as well as via a

ceiling mounting kit used to safely secure the speakers to the ceiling. Table 1

defines the Closed-back Ceiling speakers:

Table 1: Closed-back Ceiling Speakers – Definition

Name Diameter [“] Resistance [

Ω

] Closed-back Depth [“]

SPK-CC678 6.5 8 7

SPK-CCV448 4 8 4

SPK-CCV444 4 4 4

Figure 1shows an example of how the Closed-back Ceiling speakers can be

installed in a boardroom setup:

Figure 1: Closed-back Ceiling Speakers in a Boardroom Setup

Your Closed-back Ceiling Speakers

To achieve the best performance:

•Connect only good quality connection cables1

•Avoid interference from neighboring electrical appliances and position

your Kramer Closed-back Ceiling speakers away from moisture,

excessive sunlight and dust

, thus avoiding interference,

deterioration in signal quality due to poor matching, and elevated noise-

levels (often associated with low quality cables)

4 Your Closed-back Ceiling Speakers

Figure 2and Figure 3define the SPK-CC678 and the SPK-CCV448 and

SPK-CCV444, respectively.

1 Such as the Kramer BC-2S cable

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your Closed-back Ceiling Speakers

Figure 2: SPK-CC678 Closed-back Ceiling Speaker

Figure 3: SPK-CCV448 / SPK-CCV444 Closed-back Ceiling Speaker

Your Closed-back Ceiling Speakers

Table 2defines the Closed-back Ceiling speaker hardware items (per speaker

pair):

Table 2: Closed-back Ceiling Speakers Hardware Items

Description

A pair of

ceiling

speakers

(one shown1)

Two grilles

(one shown)

Cutout

template

Table 3defines the ceiling mounting kit items:

Table 3: Ceiling Mounting Kit Items

Four

support

ring screws

Two

ceiling

support

rings

(C-ring) –

one shown

Two pairs of

tile rails – one

of a pair

shown

Each Closed-back ceiling speaker is supported by a C-ring and two tile rails2.

When mounting onto the ceiling tiles3, use both supports. When mounting onto

a sheetrock ceiling, the C-ring alone is used to reinforce the ceiling material.

Figure 4shows a schematic diagram of the closed-back ceiling speaker:

1 The quantity applies to all models

2 The tile rails prevent the speakers from falling if the tile itself comes out or falls apart, as their ends catch onto the T-grid

3 Be sure that the tiles can support the speaker. Smaller sized tiles or fiberglass-type tiles cannot support the weight of the

speakers. When this is the case, the speakers will need additional support

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Installing the Closed-back Ceiling Speakers

Figure 4: Closed-back Ceiling Speaker Schematic Diagram

5 Installing the Closed-back Ceiling Speakers

This section explains how to install the closed-back ceiling speakers, that is:

•Choosing the best place to locate your speakers (see section 5.1)

•Cutting the ceiling tile (see section 5.2)

•Mounting the Speakers (see section 5.3)

•Painting the speakers (see section 5.4)

5.1 Choosing the Best Location

Ideally, locate the speakers above the main listening area. Before doing so, be

sure that:

•The desired location is free of obstructions, such as electrical piping, AC

ducts or water lines, and so on

•There is enough space behind the mounting surface for the speakers

•Rear side of the speaker is not blocked by wall studs or other objects

Installing the Closed-back Ceiling Speakers

5.2 Cutting the Ceiling Tile

To cut the ceiling tile, do the following:

1. Remove the circle in the supplied template1

2. Mark the opening in the correct location by tracing the hole in the template.

3. Cut out the hole according to the template or with a circular cutter set to

the appropriate cutout size2

4. Route the wiring from the amplifier to the speakers’ cutout holes, taking

care not to place them next to electrical wires or at least at a distance of

about two feet from an AC line

If you are mounting the speakers onto a ceiling tile, remove the ceiling tiles

where you plan to install the speakers. Use the template to trace and then

cutout the speaker hole over an empty box.

The closed-back ceiling speakers are supported by the ceiling mounting kit

(two C-rings and two pairs of tile rails4). When mounting onto the ceiling

tiles5

, use both supports. When mounting onto a sheetrock ceiling, the C-ring

alone is used to reinforce the ceiling material.

1 Keep this template for later use as a mask, as you may want to paint the speakers (see section 5.3)

2 Initially, you can cut a smaller area inside the marked hole just to be sure that the space above the speakers is clear

3 Do not nail or staple the speaker wires

4 The tile rails prevent the speakers from falling if the tile itself comes out or falls apart, as their ends catch onto the T-grid

5 Be sure that the tiles can support the speaker. Smaller sized tiles or fiberglass-type tiles cannot support the weight of the

speakers. When this is the case, the speakers will need additional support

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Installing the Closed-back Ceiling Speakers

5.3 Mounting the Speakers

To install the closed-back ceiling speakers, do the following:

1. Place the C-ring over the hole cut in the ceiling tile (on the “ceiling”

side). Place it around the hole so that the tabs are located in parallel to the

tile edges (see Figure 5).

T-channel Grid

Support Ring

Screws Ceiling Tile

Tile Rails

C-ring

Figure 5: Installing the Closed-back Ceiling Speakers

2. Place the tile rails on the tile and snap them into the two tabs on the

C-ring.

Align the rails so that the ends extend over the T-channel grid.

3. Insert a screw through each tab on the C-ring to secure the rails.

4. Connect the speaker wires to the appropriate connector terminals1and

screw the hold-down screws on the connector until tight2

Wiring in parallel: connect the wire pair of the subsequent speaker

to PIN 2 and PIN 3. When one input connector is removed,

subsequent speakers will remain connected (see

You can connect the speakers in the two following possible layouts:

Figure 4)

Daisy-chaining: connect the wire pair of the subsequent speaker to

PIN 1 and PIN 4. When one input connector is removed, subsequent

speakers will be disconnected (see Figure 4)

5. Plug the connector into the socket in the terminal cup of the speaker (see

Figure 6).

6. Run the wires through the wires’ opening in the input terminal cover plug

and then into the terminal block connector of the speaker.

1 PIN 1 and PIN 2 are connected internally and are positive (+). PIN 3 and PIN 4 are connected internally and are negative (-)

2 Use a small screwdriver

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kramer Intervenants

Kramer

Kramer SPK-W511T Manuel utilisateur

Kramer

Kramer Tavor 8-T Manuel utilisateur

Kramer

Kramer YARDEN 6-OD Manuel utilisateur

Kramer

Kramer Galil 6-CO SPK-C613 Manuel utilisateur

Kramer

Kramer SPK-C612 Manuel utilisateur

Kramer

Kramer Yarden VT-1 Manuel utilisateur

Kramer

Kramer Yarden IH-1 Manuel utilisateur

Kramer

Kramer SPK-OC508 Manuel utilisateur

Kramer

Kramer SPK-CC348F Manuel utilisateur

Kramer

Kramer SPK-WA511 Manuel utilisateur

Kramer

Kramer Yarden 8-T SPK-C820T Manuel utilisateur

Kramer

Kramer SPK-W411T Manuel utilisateur

Kramer

Kramer Galil 6-AWAll Manuel utilisateur

Kramer

Kramer Galil 8-C Manuel utilisateur

Kramer

Kramer SPK-OCA504 Manuel utilisateur

Kramer

Kramer SPK-W511 Manuel utilisateur

Kramer

Kramer Galil 6-AW Manuel utilisateur

Kramer

Kramer Yarden 4-O Manuel utilisateur

Kramer

Kramer KADS-100 Manuel utilisateur

Kramer

Kramer SPK-CCF848 Manuel utilisateur

Kramer

Kramer Galil 6-I Manuel utilisateur

Kramer

Kramer Yarden 6-ID SPK-I651T-KI Manuel utilisateur

Kramer

Kramer SPK-W612 Manuel utilisateur

Kramer

Kramer SPK-OCA508 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur