Kramer VP-774 Manuel utilisateur

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VP-774

Presentation Switcher/Scaler

P/N: 2900-300268 Rev 2

VP-774 – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

3.1 HDCP Compliance 7

3.2 About HDBaseT™ Technology 7

3.3 Using Twisted Pair Cable 7

3.4 Defining the VP-774 Presentation Switcher/Scaler 7

4Installing in a Rack 11

5Connecting the VP-774 12

5.1 Wiring the RJ-45 Connectors 15

5.2 Connecting the Balanced Stereo Audio Output 16

5.3 Microphone Pinout 16

5.4 Audio Input Pinout 16

6The OSD Menu 17

6.1 OSD Menu Operation Example 17

6.2 The Input Menu 20

6.3 The Audio Menu 27

6.4 The Process Menu 33

6.5 The Picture Menu 34

6.6 The Enhance Menu 35

6.7 The Scale Menu 36

6.8 The Miscellaneous Menu 39

7The Display Modes 45

7.1 The Single Window Display Mode 45

7.2 The Dual Window Display Mode 45

8Controlling the VP-774 50

8.1 Controlling via the Front Panel Buttons 50

8.2 Controlling via the OSD Menu 50

8.3 Controlling via the VP-774 Web Pages 51

8.4 Controlling via the Infrared Remote Control Transmitter 55

9Port Tunneling 57

10 Flash Memory Upgrade 59

11 Technical Specifications 60

11.1 Default Communication Parameters 61

11.2 Input Resolutions 61

11.3 Output Resolutions 63

12 The VP-774 RS-232 Communication Protocol 64

12.1 Using the Communication Protocol 64

12.2 Communication Protocol: Mimicking OSD 64

12.3 Protocol Table: Mimicking Remote and Front Panel Buttons 74

12.4 The Protocol 3000 Common Operation Commands 74

VP-774 - Contents

Figures

Figure 1: VP-774 Presentation Switcher/Scaler Front Panel 8

Figure 2: VP-774 Presentation Switcher/Scaler Rear Panel 9

Figure 3: 15-pin HD Connector Pinout 12

Figure 4: Connecting the VP-774 Presentation Switcher/Scaler 14

Figure 5: TP PINOUT 15

Figure 6: Connecting the Balanced Stereo Audio Output 16

Figure 7: Connecting an Unbalanced Stereo Audio Acceptor to the Balanced Output 16

Figure 8: Microphone Pinout 16

Figure 9: Audio Input Pinout 16

Figure 10: Input Menu 20

Figure 11: Select the Display Mode 22

Figure 12: Changing the Size of the Window 23

Figure 13: Increasing the Width 23

Figure 14: Increasing the Height 24

Figure 15: Positioning the Window 24

Figure 16: Window Customization 25

Figure 17: H-Position Slide Bar 25

Figure 18: Moving the PiP Window 26

Figure 19: Audio Menu 27

Figure 20: Set the Output Volume Level 29

Figure 21: SDI Channeling Example 30

Figure 22: The SDI Channeling Menu 30

Figure 23: SDI Channeling Example 31

Figure 24: SDI bypassed Channels Menu 32

Figure 25: Process Menu 33

Figure 26: Picture Menu 34

Figure 27: Enhance Menu 35

Figure 28: Scale Menu 36

Figure 29: Misc Menu 39

Figure 30: XML File Transfer 43

Figure 31: Emergency Alert System Display 43

Figure 32: CV superimposed over DP 48

Figure 33: Entering the IP Number in the Address Bar 51

Figure 34: Local Area Connection Properties Window 53

Figure 35: Internet Protocol (TCP/IP) Properties Window 53

Figure 36: Infrared Remote Control Transmitter 55

Figure 37: Port Tunneling 57

VP-774 – Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined by

function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Congratulations on purchasing your Kramer VP-774 Presentation Switcher/Scaler.

This product, which incorporates HDMI™ technology, is ideal for:

Projection systems in conference rooms, boardrooms, auditoriums, hotels

and churches, production studios, rental and staging

Any application where high quality conversion and switching of multiple and

different video signals to graphical data signals is required for projection

purposes

VP-774 - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check

if firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer VP-774 away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the power cord that is supplied with the unit

Warning:

Do not open the unit. High voltages can cause

electrical shock! Servicing by qualified personnel only

Warning:

Disconnect the power and unplug the unit from the wall

before installing

VP-774 – Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims

to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country go

to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

VP-774 - Overview

3 Overview

The Kramer VP-774 is a high quality presentation switcher and scaler. It accepts

one of nine inputs: an SDI signal on a BNC connector, a DisplayPort (DP) signal on

a DisplayPort connector, one composite video signal on an RCA connector, two

computer graphics signals on 15-pin HD connectors, and four HDMI signals on

HDMI connectors. It scales the video, embeds the audio, and simultaneously outputs

the signal as follows: to two HDMI outputs, to an SDI output and to an HDBaseT TP

output, together with a digital audio output and a balanced stereo audio output.

The VP-774 Presentation Switcher / Scaler features:

PixPerfect™Scaling Technology –Kramer’s precision pixel mapping and

high quality scaling technology. High-quality 3:2 and 2:2 pull down de-

interlacing and full up and down scaling of all video input signals

State-of-the-art video processing technology, with the highest quality de-

interlacing, noise reduction, and scaling performance for both standard-

definition and high-definition signals

K-IIT XL™ Picture-in-Picture Image Insertion Technology - Ultra stable

picture−in−picture, picture−and−picture and split screen capability, or fully

customizable windows’size and position control: any source can be inserted

into or positioned next to any other source and resized as desired

Ultra Fast Fade-Thru-Black (FTB™) Switching - Video switching transitions

are clean and ultra-fast. The video fades to black and the new input fades

from black for smooth, glitch-free switching. The output signal provides

constant sync so the display never glitches

An emergency alert system that can have a national or campus-wide

notification immediately displayed when an emergency situation develops, by

means of automatic text overlaying, either via a crawler or a full screen cover

up, as well as an optional audio alert

Port tunneling, bidirectional RS-232 interface –simple control commands

and data can flow in both directions from a controller to the VP-774 via the

Ethernet, allowing status requests and control of the destination unit

Advanced deinterlacing functions - including 3D comb filtering, film mode,

diagonal correction and motion detection

VP-774 – Overview

Scaled Outputs –2 HDMI outputs, an SDI output and an HDBaseT TP

output simultaneously

HDBaseT™ technology with a bandwidth of up to 6.75Gbps (2.25Gbps per

graphic channel)

Up to 130m (430ft) normal mode; up to 180m (590ft) Ultra mode (1080p

@60Hz @24bpp) when using BC-DGKat623 cables

For optimum range and performance, use Kramer's BC−DGKat524,

BC−DGKat623 and BC−DGKat7a23 shielded twisted pair (STP) cables.

Note that the transmission range depends on the signal resolution,

graphics card and display used. The distance using non−Kramer CAT 5,

CAT 6, and CAT 7 cables may not reach these ranges.

Output Resolutions –HDTV and Computer Graphics up to 2K and

1080p/UXGA with selectable refresh rates

Multiple Aspect Ratio Selections –Follow input, follow output, best fit,

letterbox

Multi-Standard SDI support - SDI (SMPTE 259M), HD-SDI (SMPTE 292M)

and 3G HD-SDI (SMPTE 424M)

Looping 3G HD-SDI Input

SDI channeling, letting you select one active audio signal and three

bypassed signals from eight embedded stereo audio channels

Multi-Standard Video support - NTSC (3.58/4.43), PAL (M/N/60) and SECAM

Built-in Time Base Corrector - Stabilizes unstable video sources

Built-in Proc-Amp with enhanced functions such as color correction, gamma

and dither

Input and output audio level adjustment

Balanced stereo audio inputs, with two microphone inputs as well as digital

stereo and balanced stereo outputs

Selectable Microphone talkover or mix modes

Automatic detection and selection of the HDMI and DP embedded audio.

The VP-774 automatically outputs the signal from the HDMI and DP

embedded audio inputs or performs an analog takeover to output the

respective analog audio input

Table des matières

Manuels Écailleur populaires d'autres marques

CYP

CYP CSLUX-300I Manuel utilisateur