Kramer PSE-4 Manuel utilisateur

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

PSE-4

10G Quad POE Injector

P/N: 2900-300487 Rev 1

PSE-4 – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

4Defining the PSE-4 5

5Connecting the PSE-4 6

6Wiring the DGKat TP RJ-45 Connectors 8

7Technical Specifications 9

Figures

Figure 1: PSE-4 10G Quad POE Injector Front Panel 5

Figure 2: PSE-4 10G Quad POE Injector Rear Panel 5

Figure 3: Connecting the PSE-4 10G Quad POE Injector 6

Figure 4: The PSE-4 Supplying Power to Receivers 7

Figure 5: TP Pinout Wiring 8

PSE-4 - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:

Sierra Products; GROUP 12: Digital Signage; GROUP 13: Audio; and GROUP 14:

Collaboration.

Congratulations on purchasing your Kramer PSE-4 10G Quad POE Injector, which

is ideal for the following typical applications:

Provide power to in-wall mounted devices

Provide power to remote devices with no access to power

PSE-4 - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerav.com/downloads/PSE-4 to check for up-to-date

user manuals, application programs, and to check if firmware upgrades

are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cable) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer PSE-4 away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

No operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics power supply that is

provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

PSE-4 - Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

PSE-4 - Overview

3 Overview

The PSE-4 is a four-way PoE (Power-over-Ethernet) injector which supports 4K

UHD video.

The PSE-4 provides power remotely over Ethernet to up to four devices capable of

acting as PoE acceptors, (for example, the WP-5VH2, where it might be difficult to

connect an external power supply). This allows a single HDBT LAN cable to

provide both data and electrical power to compatible devices.

In particular, the PSE-4 features:

A total range of up to 100m (328ft) @ 4K on shielded BC-HDKat6a cable (or

equivalent)

4K support

48V DC power

A Kramer MegaTOOLS 

®enclosure

PSE-4 - Defining the PSE-4

4 Defining the PSE-4

Figure 1 defines the front panel of the PSE-4 10G Quad POE Injector.

Figure 1: PSE-4 10G Quad POE Injector Front Panel

Feature

Function

POE STATUS 1~4

LEDs

The relevant LED lights green when the PSE-4 provides

power over Ethernet to a remote device on that port

ON LED

Lights green when the device is powered on

Figure 2 defines the rear panel of the PSE-4 10G Quad POE Injector.

Figure 2: PSE-4 10G Quad POE Injector Rear Panel

Feature

Function

LAN 1 RJ-45 Connector

Connect to the first Ethernet/HDBT LAN

LAN + POE 1 RJ-45

Connector

Connect to the first Ethernet/HDBT LAN which is to

be powered by the PoE

LAN 2 RJ-45 Connector

Connect to the second Ethernet/HDBT LAN

LAN + POE 2 RJ-45

Connector

Connect to the second Ethernet/HDBT LAN which

is to be powered by the PoE

LAN 3 RJ-45 Connector

Connect to the third Ethernet/HDBT LAN

LAN + POE 3 RJ-45

Connector

Connect to the third Ethernet/HDBT LAN which is

to be powered by the PoE

LAN 4 RJ-45 Connector

Connect to the fourth Ethernet/HDBT LAN

LAN + POE 4 RJ-45

Connector

Connect to the fourth Ethernet/HDBT LAN which is

to be powered by the PoE

48V DC 2-pin terminal

block

Connect to the +48V DC power supply

PSE-4 - Connecting the PSE-4

5 Connecting the PSE-4

Always turn off the power to each device before connecting it to your

PSE-4. After connecting your PSE-4, connect its power and then turn

on the power to each device.

Figure 3: Connecting the PSE-4 10G Quad POE Injector

To connect the PSE-4 as illustrated in the example in Figure 3:

1. Connect the first HDBT transmitter, (for example, the WP-5VH2) to the

LAN + POE 1 RJ-45 connector on the rear panel of the PSE-4.

2. Connect the LAN 1 RJ-45 connector on the rear panel of the PSE-4 to the

HDBT receiver, (for example, the VS-1616D).

3. Repeat steps 1 and 2 for an additional three devices.

PSE-4 - Connecting the PSE-4

4. Connect the supplied power adapter to the PSE-4 and plug the power

adapter into the mains supply.

The PSE-4 provides power to the WP-5VH2 HDBT transmitters.

Note: The PSE-4 can provide power via the LAN+POE ports to either an HDBT

transmitter or receiver. Figure 3 illustrates this by showing the PSE-4 providing

power to transmitters. The PSE-4 can also provide power to receivers as shown in

Figure 4.

Figure 4: The PSE-4 Supplying Power to Receivers

Table des matières

Autres manuels Kramer Équipement de laboratoire

Kramer

Kramer PSE-1 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur