Kontron CPS3105 Manuel utilisateur

D R A F T — F O R I N T E R N A L U S E O N L Y

The pulse of innovation

» User Guide «

CPS3105

Doc. ID: 1055-0548, Rev. 1.0

Date: July 3, 2013

D R A F T — F O R I N T E R N A L U S E O N L Y

www.kontron.com

User Guide

CPS3105

Revision History

Imprint

Kontron Europe GmbH may be contacted via the following:

MAILING ADDRESS TELEPHONE AND E-MAIL

Kontron Europe GmbH +49 (0) 800-SALESKONTRON

Sudetenstraße 7 [email protected]

D - 87600 Kaufbeuren Germany

For further information concerning other Kontron products, please visit our Internet website:

www.kontron.com.

Disclaimer

guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate;

however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other

trademarks or registered trademarks are the property of their respective owners and are recognized.

Specifications are subject to change without notice.

Publication Title: CPS3105 User Guide

Doc. ID: 1055-0548

Rev. Brief Description of Changes Date of Issue

1.0 Initial issue 3-Jul-2013

D R A F T — F O R I N T E R N A L U S E O N L Y

www.kontron.com

User Guide

CPS3105

Contents

Revision History ..........................................................................................................2

Imprint .....................................................................................................................2

Disclaimer ..................................................................................................................2

Contents ....................................................................................................................3

Tables .......................................................................................................................4

Warranty ....................................................................................................................5

Proprietary Note ..........................................................................................................5

Trademarks ................................................................................................................5

Environmental Protection Statement ................................................................................5

1 Introduction ....................................................................................... 6

1.1 Board Overview ........................................................................................... 6

1.2 Board Diagrams........................................................................................... 6

1.2.1 Functional Block Diagram .............................................................................. 6

1.2.2 Front Panel ................................................................................................ 7

1.2.3 Board Layout .............................................................................................. 7

1.3 Technical Specification ................................................................................. 8

1.4 Standards .................................................................................................. 8

1.5 Related Publications..................................................................................... 9

2 Functional Description ......................................................................... 10

2.1 Board Interfaces......................................................................................... 10

2.1.1 Front Panel LED .......................................................................................... 10

2.1.2 XMC Interface ............................................................................................ 10

2.1.3 CompactPCI Serial Interface .......................................................................... 10

3 Installation ....................................................................................... 11

3.1 Safety ...................................................................................................... 11

3.2 General Instructions on Usage ....................................................................... 11

3.3 Board Installation ...................................................................................... 12

3.3.1 Hot Swap Insertion ..................................................................................... 12

3.3.2 Hot Swap Removal ...................................................................................... 12

3.3.3 XMC Module Installation ............................................................................... 12

D R A F T — F O R I N T E R N A L U S E O N L Y

www.kontron.com

User Guide

CPS3105

Tables

1 CPS3105 Main Specifications ..................................................................................8

2 Standards ..........................................................................................................8

3 Additional Standards for Boards Ordered with Ruggedized Service ................................... 9

4 Related Publications .............................................................................................9

5 Power Status LED ............................................................................................... 10

6 Compatibility Identification Block acc. to ANSI/VITA 42.3 ........................................... 10

7 XMC Module Current ............................................................................................ 10

Figures

1 CPS3105 Functional Block Diagram ........................................................................ 7

2 4 HP CPS3105 Front Panel .................................................................................... 8

3 4 HP CPS3105 Board Layout (Top View) ................................................................... 8

D R A F T — F O R I N T E R N A L U S E O N L Y

www.kontron.com

User Guide

CPS3105

Warranty

This Kontron product is warranted against defects in material and workmanship for the warranty period

from the date of shipment. During the warranty period, Kontron will at its discretion decide to repair

or replace defective products.

Within the warranty period, the repair of products is free of charge as long as warranty conditions are

observed.

The warranty does not apply to defects resulting from improper or inadequate maintenance or handling

by the buyer, unauthorized modification or misuse, operation outside of the product’s environmental

specifications or improper installation or maintenance.

Kontron will not be responsible for any defects or damages to other products not supplied by Kontron

that are caused by a faulty Kontron product.

Proprietary Note

This document contains information proprietary to Kontron. It may not be copied or transmitted by any

means, disclosed to others, or stored in any retrieval system or media without the prior written consent

of Kontron or one of its authorized agents.

The information contained in this document is, to the best of our knowledge, entirely correct. Howev-

er, Kontron cannot accept liability for any inaccuracies or the consequences thereof, or for any liability

arising from the use or application of any circuit, product, or example shown in this document.

Kontron reserves the right to change, modify, or improve this document or the product described here-

in, as seen fit by Kontron without further notice.

Trademarks

This document may include names, company logos and trademarks, which are registered trademarks

and, therefore, proprietary to their respective owners.

Environmental Protection Statement

This product has been manufactured to satisfy environmental protection requirements where possible.

Many of the components used (structural parts, printed circuit boards, connectors, etc.) are capable

of being recycled.

Final disposition of this product after its service life must be accomplished in accordance with appli-

cable country, state, or local laws or regulations.

D R A F T — F O R I N T E R N A L U S E O N L Y

www.kontron.com

User Guide

CPS3105

1 Introduction

1.1 Board Overview

The CPS3105 is a 3U CompactPCI® Serial carrier board that provides support for one XMC module. The

carrier board is intended to offer system designers a cost-effective solution to expand the systems I/O

capability using a wide range of XMCs available on the market. The CPS3105 is equipped with a dedicat-

ed PCI Express switch between the onboard XMC connector and the CPCI-S.0 system connector provid-

ing two advantages. First, it decouples and buffers the PCI Express signals and restores signal

integrity. Second, it is able to convert one x4 PCI Express 3.0 data stream from the system side into one

x8 PCI Express 2.1 data stream to the XMC side. Thus, maximum data bandwidth can be provided to com-

monly available XMC modules based on PCI Express 2.1.

1.2 Board Diagrams

The following diagrams provide additional information concerning board functionality and component

layout.

1.2.1 Functional Block Diagram

Figure 1: CPS3105 Functional Block Diagram

Onboard Power Supplies 12 V

Power Enable

Pwr LED Onboard Power Supplies 12 V

PCIe

Hot Swap Handle Power Enable

Front CompactPCI

Serial

x4 PCIe 3.0

PEX 8712

PCI Express

Switch

x8 PCIe 2.1

XMC Connector

PCIe x8

D R A F T — F O R I N T E R N A L U S E O N L Y

www.kontron.com

User Guide

CPS3105

1.2.2 Front Panel

Figure 2: 4 HP CPS3105 Front Panel

1.2.3 Board Layout

Figure 3: 4 HP CPS3105 Board Layout (Top View)

CPS3105

Pwr

XMC

Power Status LED

Pwr (green): Power Status of the CPS3105

PEX 8712

PCI Express

Switch

Pwr LED

Heat Sink

D R A F T — F O R I N T E R N A L U S E O N L Y

www.kontron.com

User Guide

CPS3105

1.3 Technical Specification

1.4 Standards

This product complies with the requirements of the following standards.

Table 1: CPS3105 Main Specifications

FEATURES SPECIFICATIONS

Switch

PCI Express Switch ExpressLane™ PEX 8712 PCI Express 3.0 switch from PLX Technology used to provide

maximum performance to an XMC module by spitting down the x4 PCI Express 3.0

interface to a x8 PCI Express 2.1/1.0 interface

Connectors

XMC XMC connector, J2 (P15), for connecting an XMC module to the CPS3105

CompactPCI Serial CompactPCI Serial interface on connector P1:

» Compliant with PICMG® CPCI-S.0 R 1.0 CompactPCI® Serial Specification

» Support for one x4 PCI Express 3.0 interface

Hot

Swap

Hot Swap Hot swap handle with integrated hot swap switch for shutting down the power sup-

plies in order to safely remove the CPS3105 from the system

LED

Front Panel LED Power Status LED:

» Pwr (green): Power Status of the CPS3105

General

Mechanical 3U, 4 HP, CompactPCI Serial-compliant form factor

Power Consumption approx. 4.7 W (without XMC module)

Power Supply +12V DC in accordance with the CompactPCI® Serial Specification

Temperature Range Operational: 0°C to +60°C Standard

-40°C to +85°C Extended

Storage: -40°C to +85°C Without XMC module

Recommended Airflow Volumetric Flow Rate: > 10 cfm

Sufficient airflow must be provided to ensure optimal operation and long-term

reliability of the CPS3105.

Climatic Humidity 93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78)

Dimensions 100 mm x 160 mm

Board Weight 140 grams

Table 2: Standards

TYPE ASPECT STANDARD

CE Emission EN55022, EN50121-3-2, EN61000-6-3

Immission EN55024, EN50121-3-2, EN61000-6-2

Electrical Safety EN60950-1

Mechanical Mechanical Dimensions IEEE 1101.10

Environmental Climatic Humidity IEC60068-2-78

WEEE Directive 2002/96/EC

Waste electrical and electronic equipment

RoHS 2 Directive 2011/65/EU

Restriction of the use of certain hazardous sub-

stances in electrical and electronic equipment

D R A F T — F O R I N T E R N A L U S E O N L Y

www.kontron.com

User Guide

CPS3105

In addition, boards ordered with the ruggedized service comply with the following standards as well.

Note: Customers desiring to perform further environmental testing of the CPS3105 must contact

Kontron for assistance prior to performing any such testing.

Boards without conformal coating must not be exposed to a change of temperature which

can lead to condensation, as it may cause irreversible damage especially when the board

is powered up again.

Kontron does not accept any responsibility for damage to products resulting from destruc-

tive environmental testing.

1.5 Related Publications

The following publications contain information relating to this product.

Table 3: Additional Standards for Boards Ordered with Ruggedized Service

TYPE ASPECT STANDARD REMARKS

Environmental Vibration

(Sinusoidal)

IEC60068-2-6

IEC61131-2

Ruggedized version test parameters:

9-150 (Hz) frequency range

1 (g) acceleration

1 (oct/min) sweep rate

10 cycles/axis

3 axis

Single Shock IEC60068-2-27

IEC61131-2

Ruggedized version test parameters:

15 (g) acceleration

11 (ms) shock duration half sine

3 number of shocks per direction (total: 18)

6 directions

5 (s) recovery time

Table 4: Related Publications

PRODUCT PUBLICATION

CompactPCI Serial Systems PICMG® CPCI-S.0 R 1.0 CompactPCI® Serial Specification

All Kontron products Product Safety and Implementation Guide, ID 1021-9142

XMC ANSI/VITA 42.0-200x XMC Switched Mezzanine Card Auxiliary Standard

ANSI/VITA 42.3-2006 XMC PCI Express Protocol Layer Standard

D R A F T — F O R I N T E R N A L U S E O N L Y

www.kontron.com

User Guide

CPS3105

2 Functional Description

2.1 Board Interfaces

2.1.1 Front Panel LED

The CPS3105 provides one Power Status LED on the front panel.

2.1.2 XMC Interface

The CPS3105 uses one x8 PCI Express 2.1 interface operating at 5.0 GT/s and compliant with the ANSI/

VITA 42.0 and ANSI/VITA 42.3 specifications.

XMC modules are based on 3.3 V power along with variable power (VPWR) defined as either 5 V or 12 V

in the ANSI/VITA 42.0-200x XMC Switched Mezzanine Card Auxiliary Standard specification. On the

CPS3105, the VPWR is configured to 12 V.

Note: XMC integrators should carefully review the power ratings, cooling capacity and airflow re-

quirements in the application prior to installation of an XMC module on the CPS3105.

2.1.3 CompactPCI Serial Interface

The CPS3105 provides a standard CompactPCI Serial interface compliant with the PICMG® CPCI-S.0 R 1.0

CompactPCI® Serial Specification. The interface is comprised of one CompactPCI Serial connector, P1.

The pin assignment of the P1 connector is defined in the PICMG® CPCI-S.0 R 1.0 CompactPCI® Serial

Specification.

Table 5: Power Status LED

LED COLOR STATE FUNCTION

Pwr green Off Power off

On Power on

Table 6: Compatibility Identification Block acc. to ANSI/VITA 42.3

XMC Form Factor Standard XMC.3

Connector Identifier P15 (J2 on the CPS3105)

Protocol Identifier PCIe

Signal Voltage Parameter Standard

Keywords 1 - 3 8 Lane Link 0 5.0Gb/s

Table 7: XMC Module Current

VOLTAGE CONTINUOUS CURRENT PEAK CURRENT

3.3 V / 3.3 V AUX 2.0 A 2.5 A

+12 V / VPWR (12 V) 2.5 A 3.0 A

-12 V 0.15 A 0.2 A

Table des matières

Autres manuels Kontron Carte PCI

Kontron

Kontron ePCI-101 Manuel utilisateur

Kontron

Kontron PCI-762 Manuel utilisateur

Kontron

Kontron CP306 Manuel utilisateur

Kontron

Kontron 104-ADIO128 Manuel utilisateur

Kontron

Kontron CP605 Manuel utilisateur

Kontron

Kontron PCI-955 Board Manuel utilisateur

Kontron

Kontron CP307 Manuel utilisateur

Kontron

Kontron MSM8C104EX Manuel utilisateur

Kontron

Kontron eBP-6A4B1 Manuel utilisateur

Kontron

Kontron CP6004-SA Manuel utilisateur

Kontron

Kontron PCI-COM-8ULP Manuel utilisateur

Kontron

Kontron PCI-AOB8/12 Manuel utilisateur

Kontron

Kontron CP6108X Manuel utilisateur

Kontron

Kontron SUPERFASTCOM-CP Manuel utilisateur

Kontron

Kontron CP3010-SA Manuel utilisateur

Kontron

Kontron DIMM-PC/COM1 Manuel utilisateur

Kontron

Kontron DIMM-PC/ETH+COM Manuel utilisateur

Kontron

Kontron cPCI-MXP64GX Manuel du produit

Kontron

Kontron CP6004-SA Manuel utilisateur

Kontron

Kontron eBP-4A3B0 Manuel utilisateur

Kontron

Kontron CP6011 Manuel utilisateur

Kontron

Kontron CP3003-SA Manuel utilisateur

Kontron

Kontron 0-0096-4514 Manuel utilisateur

Kontron

Kontron CP3004-SA Manuel utilisateur

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur