Konix D27VA240A2 Manuel utilisateur
Galar
Borderless wide screen
USER MANUAL
3
A
TABLE OF CONTENTS
EMC COMPLIANCE .....................................................01
IMPORTANT PRECAUTIONS .................................02
1.INTRODUCTION
• 1.1.General .....................................................................................4
• 1.2.Features ..................................................................................4
• 1.3.Packing List ...........................................................................4
2.INSTALLATION
• 2.1.Connection of signal cable ..............................................5
• 2.2.Connection of power cord ..............................................5
• 2.3.Connection of Audio jack ................................................5
• 2.4.Power on ...............................................................................6
• 2.5.Self-inspection .....................................................................6
• 2.6.Image Adjustment .............................................................6
3.OPERATION
• 3.1.OSD ..........................................................................................7
• 3.2.Safeguard ..............................................................................8
• 3.3.Setting of display mode ..................................................8
4.TECHNICAL SPECIFICATION .............................9
5.TROUBLE SHOOTING ...........................................10
4
AEMC COMPLIANCE
This device has been tested and found to comply with the standards for a
class B digital device, pursuant to Part 15 of FCC Rules.Those standards are
designed to provide reasonable protection against harmful interference in a
residential installation.This device generates and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
If this device does cause harmful interference to radio or television reception,
which can be determined by turning the device off and on, user is encouraged
to try to correct the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna
--- Increase the separation between the device and receiver
--- Plug the device into a wall outlet different from that connected to the receiver.
--- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: any change or modication not expressly illustrated
in this manual may void the warranty.
NOTE: any unshielded cable is not allowed
tobe used in the device!
!
5
A
IMPORTANT PRECAUTIONS
WARNINGS:
1. Before using this device, please read all the instructions in this manual
carefully.
2. Please keep the manual carefully for future reference.
3. Unplug this device from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp or wet cloth to clean. Please use
LCD screen detergent for cleaning if it is still dirty.
4. Do not use the parts not recommended by the manufacturer, othenwise it
may cause a hazard.
5. When unplugging the power cord of the monitor or adapter, please hold
the plug with your hand, do not pull the cord directly.
6. Do not place any object on the power cord. Do not trample it either.
7. Do not use the device near water sources, e.g. bathtub, basin, kitchen
sink, or washing machine. Do not place the device on a wet oor, or near a
swimming pool etc. Do not touch the screen with your ngers or other hard
objects.
8. Slots and openings on the housing and its back or bottom are provided for
ventilation. To ensure reliable operation of the components and to protect
them from overheating,these openings must not be blocked or covered
placing the device on a bed, sofa, rug, or other similar surface. The device
should never be placed near or over a radiator or heater and should not be
placed in a built-in installation unless proper ventilation is provided.
9. Make sure that the device is at least 5cm distance from the wall or other
objects around when it is in use.
10. The power supply must respond to that stated on the rating plate. If you
have any query about the power supply, please refer to the dealer or local
power supply provider.
11. As a safeguard measure, the monitor or adapter is equipped with a power
cord with three-terminal plug, the third terminal is grounded. If the plug
cannot be inserted into the outlet, please contact an electrical technician
for replacing the original outlet while keeping the safeguard measure in
effect.
12. Ensure that the power socket and cord in use are able to take the sum of
the rated currency of all the products.
13. Do not put the device at the place where user is subject to mal-operation.
6
A
14. Observe all the warnings and instructions described in the manual.
15. Do not overload the power outlet or use any extension cord, otherwise it
may cause re or electric shock.
16.
Do not attempt to repair this device yourself since opening or removing
covers may expose you to dangerous voltage or other hazards. Refer servi-
cing to
qualied service personnel.
17. Unplug this monitor or AC adaptor from the wall outlet and refer servicing
to qualied service personnel under the following conditions:
a. When the power cord or plug is damaged or worn.
b. If the device has been dropped or its housing has been damaged.
c.When the performance of the device deteriorates distinctly.
18. The power cord is the main facility to turn on/off the device; unplug it if
the device is not used for a long period of time.
19. Store the device at a place of good ventilation; avoid strong sunlight, high
temperature or humidity.
20. Store the device at a place at -20°C~55°C room temperature. Otherwise, it
may cause permanent damage.
7
A
1. INTRODUCTION
1.1 General
Thank you for purchasing the latest model of LED monitor, with advantages of
high display performance and light weight etc, meanwhile with the power
saving and no-radiation features, the latest LED will bring you comfortable,
safe and environmental-protection brand-new visual experience.
Your purchase and use of this product is highly appreciated!
1.2 Features
--- High performance intelligent multi-frequency scanning, use active matrix
Thin lm transistor liquid crystal display (TFT), LED backlight.
Micro Computer digital technology control, no radiation, no glare IBuilt-in
multimedia speaker system (option).
--- Built-in AV signal connection terminal and 8 terminal (option).
--- Comply with VESA DPMS International Power Saving Regulation.
--- Support DDC 1/2B and Windows PNP Plug & Play.
--- Microprocessor based with OSD (On Screen Display) control, be able to
adjust the image to optimum.
--- Built-in hoisting hole complying with International Standard (VESA), which
is able to hang the display on the wall.
1.3 Packing list
Please make sure the following items are included with your LED display
before installation:
--- LED monitor (with pedestal)
--- DP cable
--- HDMI Cable
--- Adaptor
--- User’s manual
--- HDMI Cable
If any of there items are missing, please contact with your dealer for technical
support and customer service.
NOTE:be sure to save original box and all packing
materialfor transport in future if the display need.
!
8
A2. INSTALLATION
2.1 Connection of signal cable
Before connecting your monitor and PC with signal cable, please turn off your
monitor and computer. And then insert one end of the signal cable into the
DP/HDMI jack on your computer, and lock it with two xed screw for
ensured grounding Finally, please insert another end of signal cable to the
DP/HDMI signal input jack of monitor and lock it with xed screw.
2.2 Connection of power cord
First, insert one end of power cord cable into the power input jack of monitor,
and another end into power outlet.
2.3 Connection of Audio jack
Insert the audio cord cable into the audio input jack of the monitor and
computer.
1DC
2USB
3HDMI
4HDMI
5DP
6PHONE
9
A
2.4 Power on
Turn on the monitor and computer,and then indicator will light green (or blue)
when the screen is under normal condition. Please check to see if there is any
wrong with the connection of video signal cable if the indicator lights red.
2.5 Self-inspection
If the monitor inspects there is no horizontal and vertical signal, it will prompt
to check the video input, please refer to the illustration below, and the
monitor will enter into power saving mode
after several seconds, the indicator will
light red. The screen will restore to normal
display once receiving video signal.
2.6 Image Adjustment
Please adjust the image according to your need; please refer to the
“Operation” in Section Three.
10
A3. OPERATION
3.1 OSD
3.1 Auto/Exit key
Under OSD menu,this key is used for exiting the OSD.
If not under OSD menu, this key helps players to nd the shooting point.
3.2 Menu key
This key is used for entering into main menu and conrming your selecting.
3.3 “+”/Brightness
Under OSD menu, this key is used for up adjusting the related geometrical
setting to best condition. If not under OSD menu, this key is for brightness
adjustment.
3.4 “-”/ECO
Under OSD menu, this key is used for down adjusting the related geometrical
setting to best condition. If not under OSD menu, this key is for ECO
adjustment.
3.5 Power on
This key is used for turning on or turn off the power supply.
OSD menu
1.1 Main menu
Item: 1. Picture adjusting 2. Color adjusting 3. Size position 4. Set up
5. Information
Submenu
ltem: 1. Brightness 2. Contrast 3. Color Temp 4. Red 5. Green 6. Blue
7. Aspect Ratio 8. Bluelight Fitter 9. Language 10. Signal source
11. Menu H position 12 .Menu V position 13. Menu Timer 14. Volume 15. Reset
1 Auto/Exit
2 Menu/Select
3“+”/Brightness
4 “-”/ECO
5 Power
Table des matières
Langues :
Autres manuels Konix Moniteur
