Konig HAV-SDC10 Manuel utilisateur
HAV-SDC10
Portable
Micro System
1
Packaging contents
1x HAV-SDC10 Digital Music Box
1x USB cable
1x USB Driver CD for Windows
®
98SE
1x Manual
(Power adapter optional, article number P.SUP.USB400)
Location of controls
FRONT PANEL
LCD DISPLAY
VOLUME_UP
BACK/
FASTBACKWARD
SETTING KEY
VOLUME_DOWN
PLAY/PAUSE
NEXT/FASTFORWARD
ALARM KEY
2
LCD display
Battery operation
Open the battery compartment and insert 4x AA batteries (Alkaline batteries are recommended) as
shown in the diagram inside the battery compartment.
4 x AA Baterry
Power
Adapter
Power adapter operation
The connection for the power adapter is the same as the USB connection. Connect the mini plug to
the USB (5V) connection and the power plug to a 220~230V wall outlet.
Note: When the power adapter is connected the LCD backlight will turn on and remain lit until the
power adapter is unplugged.
Low battery indication
When the battery is almost nish and the red LED will blink to show a nal warning.
3
Power from USB port
The system can get power from the PC USB port for play mode if the “mass storage” icon is removed
from PC.
SD/MMC card installation
The integrated SD/MMC card slot lets you upgrade the player’s memory capacity easily with additional
SD/MMC cards.
To install an SD/MMC card:
1. Insert the card of the rear of the system in the direction of the arrow.
2. Press the card in until a click is heard.
3. To remove the SD/MMC card, press the card in and it will jump out.
Important notice: Press the card in the slot exactly conforms below gure. Trying in another way
will damage the slot.
Connect to a computer
USB Driver Installation
It is not necessary to install the USB driver if your computer is running Microsoft Windows ME/2000/
XP or newer. Computers running these operating systems will recognize the system automatically
when the USB cable is connected.
Microsoft Windows 98 SE
For Windows 98 SE it’s necessary to install the USB driver.
1. Navigate to MY COMPUTER and double-click on the CD drive icon.
2. Double-click on the le “iSetup98” to start the USB driver installation program.
3. Follow the on-screen instructions to complete the installation and then restart the computer.
Connecting the USB cable to a computer
Connect the USB cable to the system and a computer.
Turn the system and press the “Play”
s
/II button to wake-up the system.
The red LED will turn on and wink.
The computer will recognize the system as a Removable Disk.
If a SD/MMC card is installed in the system. The computer will recognize the card as a Removable
Disk.
Transferring les
The USB connection makes it easy to transfer music les (MP3/WMA) between the system
and a computer. Do not disconnect or interrupt the system.
Transferring les with Microsoft Windows
1. Locate the les or folders you would like to transfer from the computer.
2. Select the les or folders with the mouse and press CTRL-C (copy) on the keyboard.
3. Navigate to MY COMPUTER and double-click on the Removable Disk icon. The computer will
display all les and folders currently stored in the player.
4. Press CTRL-V (paste) on the keyboard to transfer the les you selected to the system.
Note: It’s also possible to use the mouse to drag-and-drop les between the system and the
computer.
4
Disconnecting from a computer and get the USB power from PC
Microsoft Windows
1. Double-click the green arrow icon in the taskbar of the computer screen (Safely Remove
Hardware).
2. Select “USB Mass Storage Device” from the list that appears and then click on “Stop”.
3. Select “USB Mass Storage Device” from the list that appears and then click on “OK”.
4. The system will direct get the power from the USB of PC and automatically play the music.
Basic operations
Standby mode
The system will enter Standby mode automatically when it is connected to a power source. The LCD
will display the time.
Power On/Off
To turn the system on and play music, press
s
/II key while in Standby mode. Once the music is
playing the blue LED will turn on and wink. When there is no songs or music in the memory content
the system will automatically escape back to standby mode.
To turn the system off, press and hold
s
/II key (Red & Blue LED will wink).
Keys denition
Press I
s
s
/
s
s
I for fastforward / fastbackward / next song/previous song
Press +/- for volume up/down
Press play/pause
s
/II to play and stop music.
Press S and A to adjust clock and alarm.
5
Clock and Alarm Setting
Alarm Section (4 Steps)
1. Enable Alarm
Press S key
-------
s
Press A key (2times)
(All digits will wink) (Alarm icon MP3 appears)
2. Set Alarm Hour
Press S key
-------
s
Press A key
(Hour digit will wink) (Set the hour value)
3. Set Alarm Minute
Press S key -------
s
Press A key
(Minute digit will wink) (Set the minute value)
Alarm time is 8:01 am and alarm sound is mp3 music. The alarm song will be the last song you listen
in the music box.
4. Press S key (Finish the Alarm setting)
Clock Section (8 Steps)
* Don’t press A key
1. Press S key -------
s
* View alarm time and setting
2. Press S key -------
s
* View alarm time and hour digit is winking
3. Press S key -------
s
* View alarm time and minute digit is winking
6
4. Set Clock Month
Press S key -------
s
Press A key -------
s
Set month to January
5. Set Clock Date
Press S key -------
s
Press A key -------
s
Set date to twelfth
6. Set Clock Hour
Press S key -------
s
Press A key -------
s
Set hour to twelve PM
Note: For the 24 hours setting and user need to press A key one cycle until the 24 hours setting
appear.
7. Set Clock Minute
Press S key -------
s
Press A key -------
s
Set minute to zero
Now the clock setting is twelve PM.
8. Press S key (Finish the clock setting)
7
Specications:
Power Supply: Adaptor: 100-240V
DC: 5V (Battery: 4 x AA, Alkaline)
Interface Port: USB 2.0
Supported Audio MP3: 96-320kbps, Variable Bit Rate
Formats: WMA: 32-192kbps
Speaker Output: 2W
Signal-to-Noise Ratio: ≥ 90dB
Frequency Response: 20-20,000Hz
PC Format: FAT16
Safety precautions:
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a problem should occur. Do not expose
the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Attention:
This product is marked with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste. There is a separate
collections system for these products.
Copyright ©
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
8
9
Table des matières
Langues :
Autres manuels Konig Lecteur MP3
Manuels Lecteur MP3 populaires d'autres marques
Blaupunkt
Blaupunkt Compact Drive MP3 Manuel utilisateur
Memorex
Memorex MMP9008 - 8GB USB 2.0 Manuel utilisateur
Meizu Electronic Technology
Meizu Electronic Technology E5 Manuel utilisateur
Naxa
Naxa NMV-173NX Manuel utilisateur
Philips
Philips PSA250 Manuel utilisateur
Zipy
Zipy go! Waving Manuel utilisateur
