Konica Minolta Di2010f Manuel utilisateur

Administrator Management Screens

Administrator Settings

Setting Machine Access

Removing Penalties

Di2010/Di2510/Di3010/Di3510

Di2010f/Di2510f/Di3010f/Di3510f

User Manual

[Additional Functions]

www.konicaminolta.net

A maximum of 999 copies can be specified at one time with this machine.

1.1 Administrator Management Screens 1

Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f 1-1

1.1 Administrator Management Screens

To display the Administrator Management screens

This explains the method for displaying the Administrator Management screens.

1Press the [Utility] key.

2Touch [Admin. Management].

3Use the 10-Key Pad to type in the

8-digit administrator code (Admin.

Password), and then touch

[Enter].

✎

Note

If the administrator code is in-

correctly entered, the message

“Incorrect administrator code.

Try again.” appears accompa-

nied by a beeping sound. Fol-

low the instructions in the message that appears and type in the correct

administrator code.

If the “Access Lock” function is set to “ON”, incorrectly typing the administra-

tor code is counted as an incorrect attempt to access the machine. After

three incorrect attempts to access the machine, even if the correct adminis-

trator code is entered on a later attempt, an error message appears and ac-

cess to the Administrator Management screen is denied. To allow access to

the Administrator Management screen, turn the machine off, then on again,

and then type in the correct administrator code.

Keep the administrator code in a safe place hidden from the general user.

11.1 Administrator Management Screens

1-2 Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f

4Touch [Admin. 1] or [Admin. 2] to

display the desired screen.

❍For details on the

Administrator Management 2

screen, refer to page 1-5.

5From the screen that appeared, touch the key for the operation that you wish to

perform or the function whose setting you wish to specify.

✎

Note

After account management settings have been specified for the Di2010/

Di2510/Di3010/Di3510, the [Account Reg], [Account Counter] keys appear

only if one of following options is installed.

Printer Controller, Network Interface Card

Network Scan Kit (or Internet Fax & Network Scan Kit).

If “Copy Track Mode”is set to “1000 Accounts”or “OFF”, neither the

[Account Reg] nor the [Account Counter] keys will appear.

1.2 Administrator Settings 1

Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f 1-3

1.2 Administrator Settings

Changing the administrator access code

This explains the method to specify or change the administrator access code.

To set the administrator access code

1Follow the procedure described in “To display the Administrator Management

screens”on page 1-1 to display the Administrator Management screen.

2Touch [Admin. 1], and then touch [Admin. Set].

3Touch [Administrator Code Input].

4Touch [Current Code], and then

use the 10-Key Pad to type in the

currently specified 8-digit

administrator code (Admin.

Password).

❍Press the [C] key to erase all

entered text.

❍To return to the previous

screen, touch [Cancel].

11.2 Administrator Settings

1-4 Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f

5Touch [New Code], and then use

the 10-Key Pad to type in the new

8-digit administrator code (Admin.

Password).

❍Press the [C] key to erase all

entered text.

❍To return to the previous

screen, touch [Cancel].

6Touch [Retype New Code], and

then use the 10-Key Pad to retype

the new 8-digit administrator code

(Admin. Password).

❍Press the [C] key to erase all

entered text.

❍To return to the previous

screen, touch [Cancel].

7Touch [Enter].

✎

Note

If an incorrect administrator code is entered, an error message appears.

Type in the correct administrator code. The error message may appear in

any of the following cases.

The code entered beside “Current Code”does not match the registered ad-

ministrator code.

The code entered beside “New Code”is not an 8-digit number.

The code entered beside “Retype New Code”does not match the code en-

tered beside “New Code”.

If the “Access Lock”function is set to “ON”, incorrectly typing the administra-

tor code is counted as an incorrect attempt to access the machine. After

three incorrect attempts to access the machine, even if the correct adminis-

trator code is entered on a later attempt, an error message appears and the

administrator code cannot be changed. To change the administrator code,

turn the machine off, then on again, and then type in the correct administra-

tor code.

1.3 Setting Machine Access 1

Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f 1-5

1.3 Setting Machine Access

Access Lock

The “Access Lock” function is used to specify whether (“On”) or not (“Off”) access

to Administrator mode, lock jobs and user boxes is monitored.

If the “Access Lock” function is set to “On”, the number of incorrect attempts to ac-

cess Administrator mode, lock jobs and user boxes is counted. After three incorrect

attempts, access to the machine is denied. To allow Administrator mode to be ac-

cessed again, turn the machine off, then on again. However, to allow lock jobs and

user boxes to be accessed again, the penalty must be removed. For more details,

refer to the Printer Controller User Manual.

To make settings for the “Access Lock” function

1Follow the procedure described in “To display the Administrator Management

screens”on page 1-1 to display the Administrator Management screen.

2Touch [Admin. 2], and then touch

[Access Lock].

3To use the “Access Lock” function,

touch [ON]. To stop using the

“Access Lock” function, touch

[OFF].

11.3 Setting Machine Access

1-6 Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f

4Touch [Enter].

❍To return to the previous screen, touch [Cancel].

5Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to

return to the Basics screen.

1.4 Removing Penalties 1

Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f 1-7

1.4 Removing Penalties

Unlock

If the “Access Lock”function is set to “ON”and the optional printer controller is in-

stalled, the penalty must be removed in order to allow access after incorrect at-

tempts to access lock jobs and user boxes. For more details, refer to the User

Manual for the printer controller.

In addition, to allow access after incorrect attempts to access Administrator mode,

turn the machine off, then on again.

11.4 Removing Penalties

1-8 Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Konica Minolta Imprimante tout-en-un

Konica Minolta

Konica Minolta bizhub C203 Series Manuel utilisateur

Konica Minolta

Konica Minolta bizhub 160f Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C280 Series Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C353 Series Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C353 Series Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C654 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub 501 Manuel utilisateur

Konica Minolta

Konica Minolta Bizhub C3850 Manuel de la liste des pièces

Konica Minolta

Konica Minolta bizhub 223 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C750i Manuel utilisateur

Konica Minolta

Konica Minolta bizhub PRESS C6000 Instructions originales

Konica Minolta

Konica Minolta bizhub C554 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub 552 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub 227 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub PRO 950 Series Manuel utilisateur

Konica Minolta

Konica Minolta bizhub press c7000 Manuel utilisateur

Konica Minolta

Konica Minolta DI2510 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C654 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub C20/C20X Instructions originales

Konica Minolta

Konica Minolta nizhub c250p Manuel utilisateur

Konica Minolta

Konica Minolta bizub pro c5501 Manuel utilisateur

Konica Minolta

Konica Minolta bizhub 552 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C550 Series Manuel utilisateur

Konica Minolta

Konica Minolta magicolor 8650 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Brother

Brother MFC-J430w Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur

Copystar

Copystar CS 4551ci Manuel utilisateur