Warning and Safety instructions
For safety reasons the drawer must only be used after it has been built in.
This is necessary to ensure that all electrical components are shielded.
Never open the casing of the appliance.
Tampering with electrical connections or components is highly dangerous to the
user and can cause operational faults.
Installation work, maintenance and repairs may only be carried out by
suitably qualified and competent persons in accordance with national and local
safety regulations to ensure safety.
Repairs and other work by unqualified persons could be dangerous and the
manufacturer will not be held liable. Ensure current is not supplied to the
appliance while maintenance or repair work is being carried out.
While the appliance is under guarantee, repairs should only be
undertaken by a service engineer authorised by the manufacturer. Otherwise
the guarantee is invalidated.
During installation, maintenance and repair work, the appliance must be
disconnected from the mains electricity supply. The appliance is only
isolated from the electricity supply completely when:
-the mains fuse is withdrawn,
-or the screw-out fuse is removed(in countries where this is applicable),
-or it is switched off at the isolator or at the wall socket and the plug
removed.
Correct usage
This appliance complies with all relevant legal safety requirements.
Incorrect use can lead to personal injury and damage to property.
To avoid the risk of accidents and damage to the drawer, you should read
these operating instructions carefully before using it for the first time. they
contain important notes on the safety, operation and care of the drawer.
This appliance is intended for domestic use only to warm plates, dishes
and other crockery. Any other usage is not supported by the manufacturer and
could be dangerous. The manufacturer cannot be held liable for damage
caused by incorrect or improper use of the appliance.
Depending on the temperature selected and the length of time the
