Kohler 7000 Series Manuel de référence

Service

Manager

Initial Here

Sales

Manager Parts

Manager Chief

Mechanic Mechanic

No. 1 Mechanic

No. 2

Mechanic

No. 3 Mechanic

No. 4

Return

This To

Routing

6/16

348

5/16

DATE REVISEDDATE ISSUED

MODEL

NO.

Service

Bulletin KT715-KT745

Engine Stall

The potential exists for these engines to stall for no apparent reason. This issue is limited to KOHLER®

7000 Series engines within the serial number range of 45327xxxxx through 4613302464. Not all engines in

this serial range will exhibit the condition.

If a customer experiences a stall condition, check the standard items such as proper fuel level, inspect for

fuel cap vent operation, as well as proper fuel ow to the carburetor. If all of these items are found to be

correct and the stall condition still occurs, it is recommended to perform the following x that involves

cuing the existing evap line as shown in Figure 1, inserting a new T-Fiing (25 155 56-S) and a new line

(25 326 28-S 14" cut to an 8" length) that will connect to ing on air cleaner base.

Figure 2. New T-Fitting and New Line Assembly.

4. New T-Fiing and line assembly is shown

installed on the engine in Figure 3.

Cut Existing Evap Line in Half

Figure 1. Cut Existing Evap Line in Half.

3. Install the new T-Fiing at the location of the

cut line. Take the new 25 326 28-S 14" long line

and cut it to an 8" length. Install and route the

new 8" long line as shown in Figure 2.

NOTE: Refer to the appropriate service manual

disassembly and reassembly procedures as

needed.

1. To access the evap line, remove the air cleaner

cover, air cleaner element, and air cleaner

base.

2. Locate the existing evap line (as shown in

Figure 1), remove it from the purge port

nipple on the carburetor, and cut it in half.

Figure 3. New T-Fitting/Line Assembly Installed.

New 8" Long

Line Connects

to Evaporative

Nipple on Air

Cleaner Base

New T-Fitting

Connects to

Purge Port

Nipple on

Carburetor

Connects to OEM Evap/Tank

5. Route the new 8" long evap line from the

T-Fiing to the plugged port on the air

cleaner base. Remove and discard the plastic

cap at that location. See Figure 4.

Figure 4. Connect New 8" Long Evap Line to

Air Cleaner Base.

6. Reassemble the engine following service

manual reassembly procedures as

needed. Run the engine to conrm engine

performance.

Normal warranty terms apply. Submit warranty

claim using 25 326 71-S as the Defective Part

Number and ZZ (Other) as the Failure Code.

Labor Time of up to 0.5 hour using Labor Code

9999 for Misc Labor.

Remove Plastic Cap

and Connect New 8"

Long Evap Line

Breather Hose

Location

Autres manuels pour 7000 Series

Table des matières

Autres manuels Kohler Moteur

Kohler

Kohler Courage XT-6 Manuel utilisateur

Kohler

Kohler KD400 Manuel utilisateur

Kohler

Kohler LOMBARDINI MARINE KDI 1903M-MP Manuel utilisateur

Kohler

Kohler SNOWPRO WH208 Manuel utilisateur

Kohler

Kohler COMMAND 20-25 HP Manuel utilisateur

Kohler

Kohler KDI-1903TCR Manuel d'instructions

Kohler

Kohler Command Pro CH1000 Manuel utilisateur

Kohler

Kohler Various Manuel de référence

Kohler

Kohler KDI 2504TM Manuel d'instructions

Kohler

Kohler KD 625/2 Manuel utilisateur

Kohler

Kohler COMMAND CV17-745 Manuel utilisateur

Kohler

Kohler Command Series Manuel utilisateur

Kohler

Kohler Aegis ELH775 Manuel utilisateur

Kohler

Kohler Command Pro CH255 Manuel utilisateur

Kohler

Kohler KDI 2504TM Manuel utilisateur

Kohler

Kohler KT715 Manuel utilisateur

Kohler

Kohler Lombardini LDW CHD 1603 Manuel de la liste des pièces

Kohler

Kohler CV11-16 Manuel utilisateur

Kohler

Kohler KD425-2 Manuel d'instructions

Kohler

Kohler Command PRO EFI Manuel utilisateur

Kohler

Kohler KDI-1903TCR Manuel utilisateur

Kohler

Kohler Lombardini 12 LD 477-2 Manuel de la liste des pièces

Kohler

Kohler KD477-2 Manuel d'instructions

Kohler

Kohler Command PRO CH260 Manuel utilisateur

Manuels Moteur populaires d'autres marques

Rotax

Rotax 125 senior MAX evo Manuel utilisateur

MTD

MTD OHV Series Manuel utilisateur

Mercury

Mercury D4.2L D-Tronic Manuel utilisateur

Selve

Selve SE Plus-RC Series Manuel utilisateur

Perkins

Perkins 1206E-E66TA Manuel utilisateur

Skov

Skov DA 174 Manuel

Rossi

Rossi TX11 Series Manuel utilisateur

Siemens

Siemens SIMOTICS T-1FW3 Feuille d'instructions

AL-KO

AL-KO PRO 350 Manuel utilisateur

MTU

MTU 12 V 4000 Lx4 Manuel utilisateur

Nanni

Nanni N3.30 Manuel d'instructions

Nanni

Nanni N5.160 CR2 Manuel utilisateur

KSB

KSB SuPreme Series Instructions d'installation

Hiwin

Hiwin EM1 Series Manuel utilisateur

Rotax

Rotax 912 i series Mode d'emploi

Siemens

Siemens SIMOTICS XP 1MB1 Manuel utilisateur

Bosch

Bosch Rexroth 70 Series Manuel utilisateur

Wacker Neuson

Wacker Neuson WM 130 Mode d'emploi