Kogan KA45CICEMKA Manuel utilisateur
45KG COMMERCIAL ICE
CUBE MAKER
KA45CICEMKA
2
Safety & Warnings 3
Components List 6
Overview 9
Installation 13
Before First Use 16
Operation 19
Cleaning & Care 22
Specifications 27
Troubleshooting 28
Wiring Diagram 31
Dimensions/Connections 32
Notes 33
3
•WARNING: Risk of fire/flammable materials used. Refer to the local
environmental authority regarding disposal of the appliance due to its flammable
blowing gas.
•WARNING: This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
•When using electrical appliances, basic safety precautions should be followed to
reduce the risk of fire, electric shock and injury to persons or property. Read all
instructions before using any appliance.
•WARNING: Risk of fire / flammable materials, take care to avoid causing a fire by
igniting flammable material.
•WARNING: Children should be supervised to ensure that they do not play with the
appliance.
•WARNING: This appliance is intended to be used in household and similar
applications such as:
oStaff kitchen areas in shops, offices, and other working environments
oFarmhouses and by clients in hotels, motels, and other residential type
environments
oBed and breakfast type environments
oCatering and similar non-retail applications
•Use this appliance only for its intended purpose as described in this user guide.
SAFETY & WARNINGS
WARNING:
•Installation must be conducted by a licensed plumber subject to
the requirements of the applicable regulatory authority, the
National Construction Code Volume Three – Plumbing Code of
Australia, associated reference standards as applicable at the
time and WMTS-105: 2016, and AS/NZS 3500.1: 2021. This is not
limited to any other plumbing components and appropriate
backflow device. Contact help.Kogan.com if requiring further
assistance.
•If for any reason this appliance requires service, it is strongly
recommended that a certified technician perform the service.
4
•This icemaker must be properly installed in accordance with the installation
instructions before it is used.
•This unit must be positioned so that the plug is accessible.
•Do not run cord over carpeting or other heat insulators.
•Do not cover the cord.
•Keep cord away from high traffic areas and do not submerge in water. No other
appliance should be plugged into the same outlet and be sure that the plug is fully
inserted into the outlet.
•It is not recommended to use an extension cord as it may overheat and cause a risk
of fire. If an extension cord must be used, use one with a minimum size of 1.5 mm2
rated no less than 16A/250V~ with a plug.
•If the power cord is damaged, cease use immediately and contact help.Kogan.com
for support.
•Disconnect the power cord from the outlet when not in use for an extended period.
•Disconnect the power cord from the outlet before cleaning or servicing the appliance.
•Never unplug this unit by pulling on the power cord. Always grasp the plug firmly and
pull straight out from the outlet.
•Do not use this unit outdoors.
•Keep the unit away from direct sunlight and make sure that there is at least 15 cm of
space around all sides of the appliance. Keep ventilation openings in the appliance
enclosure or in the built-in structure clear of obstructions.
•Never tip over the unit. Doing so will cause the unit to make abnormal noises, affect
the size of the ice cubes, and may cause water leakage from the unit.
•If the unit is brought in from outside in the winter, give it a few hours to warm up to
room temperature before plugging it in.
•Do not use liquids other than water to make the ice cubes.
•Do not clean your ice maker with flammable fluids. The fumes can create a fire
hazard or explosion.
•WARNING: Keep ventilation openings in the appliance enclosure or in the built-in
structure clear of obstructions.
•WARNING: Do not damage the refrigerant circuit.
•WARNING: This appliance must be earthed. A 220-240V/50Hz earthed power
supply must be used.
•WARNING: Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
•WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process or ice harvesting process, other than those recommended by the
manufacturer.
•WARNING: Do not use any other type of electrical appliance inside the icemaker.
5
•WARNING: Do not locate multiple portable socket-outlets or portable power supplies
at the rear of the appliance.
Important:
The wires in this mains lead are coloured in accordance with the following code:
•Green and yellow: Earth
•Blue: Neutral
•Brown: Live
As the colour of the wires in the mains lead of the appliance may not correspond with the
coloured markings identifying the terminal in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug
which is marked with the letter E, G or by symbol or coloured green or green-and-
yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the
letter N.
The wire which is coloured brown must be connected to the terminal which is marked with
letter L.
6
No
Parts Name Material Qty
1 Front panel Stainless steel 1
2 Bottom plate Zinc-plated steel board 1
3 Condenser Copper tube and aluminium fin 1
4 Operation panel paper PET 1
COMPONENTS LIST
7
5 Operation panel PCB box ABS 1
6 Operation panel PCB Electrical and Electronic parts 1
7 Compressor AC220-240V, 50Hz 1
8 Adjustable foot ABS and bolts 4
9 Service valve Copper 1
10 Dry filter Copper 1
11 Capillary Copper 1
12 DC fan DC12V, Electrical parts 3
13 Water inlet valve DC12V Electrical parts 1
14 Water drainage pipe of the water tank Silicone pipe 1
15 Ice-harvesting Electro-magnetic valve AC220V/50Hz, Electrical parts 1
16 Water tank ABS 1
17 Right side plate Cold-rolled steel with powder
painting or 430 stainless steel 1
18 Water circulation pump AC220-240V,50Hz, Electrical
parts 1
19 Cover of the water tank ABS 1
20 Water level detecting switch DC5V, Electrical parts 1
21 Ice-full detecting plate ABS 1
22 Magnetic control switch DC5V, Electrical parts 1
23 Cover board on the right side of the
evaporator ABS 1
24 Evaporator and its frame
Copper plated with nickel and ABS
frame 1
25 Water supplying pipe Silicone pipe 1
8
26 Water dividing pipe, with nine holes ABS 1
27 Cap of the water dividing pipe Silicone 1
28 Electrical PCB box ABS, fire-retardant 1
29 Main control PCB PCB, Electrical parts 1
30 Cover of the main control PCB ABS, fire-retardant 1
31 Rear plate Zinc-pated steel 1
32 Insulation sponge of the top cover PE 1
33 Top cover Stainless steel 1
34 Ice shovel ABS 1
35 Left side plate Cold-rolled steel with powder
painting or 430 Stainless steel 1
36 Foaming inner cabinet & Ice storing bin HIPS and Cyclopentane foaming 1
37 Door frame ABS 1
38 Back strength plate Zinc-plated steel 1
39 Water outlet pipe of the inner cabinet Silicone pipe 1
40 Water drainage cap Rubber 1
41 Water drainage port ABS 1
42 Door ABS 2
43 Water inlet port PP 1
44 Power cord Electrical parts 1
45 Clipper of the power cord PP, fire-retardant 1
46 Wiring Electrical parts 1
9
Main Unit Construction
1 Top cover
2 Door
3 Ice-making & water tank
assembly
Including ice-making evaporator, water tank, water pump
and some detecting parts
4 Front panel
5 Operation panel
6 Air outlet Keeps the air circulate smoothly, hot air will blow out
when unit running.
7 Water draining port Normal plugged with the cap. To drain the water, unplug
the cap and connect the white drainpipe.
8 Water inlet port for water
supply Use to connect the water supply pipe.
Accessory:
2 meters long and white colour water drainpipe, water quick connector of the water
faucet, Ø6.35mm diameter, white colour water supply pipe (3 meters long)
OVERVIEW
10
Ice-making and its water tank parts
A Water dividing pipe Water will flow out from the nice holes. If no water flows out,
can be disassembled and cleaned.
B Evaporator (ice-making module)
C Ice full detecting board Use to detect the inner cabinet is full of ice or not and to
check the ice-harvest process is completed.
D Water tank
E Water supplying pipe
F Cover board on the right side of the evaporator
G Water level switch installing plate
H Water drainpipe of the
water tank
When ice-making, this pipe should be clamped in the slot of
the water tank wall. When draining, this pipe should be
pulled out.
I Water pump
J Water level detecting switch
Table des matières
Autres manuels Kogan Machine à glaçons
Kogan
Kogan KA19LICEMKB Manuel utilisateur
Kogan
Kogan KA12KBICEMKA Manuel utilisateur
Kogan
Kogan KA19LICEMKA Manuel utilisateur
Kogan
Kogan KAICEMKR15A Manuel utilisateur
Kogan
Kogan KA19LICEMKA Manuel utilisateur
Kogan
Kogan KA38CICEMKA Manuel utilisateur
Kogan
Kogan KA32LICEMKA Manuel utilisateur
Kogan
Kogan KA19LICEMKA Manuel utilisateur
Kogan
Kogan KA21CBDISPA Manuel utilisateur
Kogan
Kogan KA15KNICEMKSSA Manuel utilisateur
