Kodak CFH-V15 Manuel utilisateur
Quick Start Guide
KODAK Video Monitor CFH-V15
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the product’
s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the product.
Warning
To prevent fire or shock hazards, do not expose this product
to rain or moisture.
Do not expose the product to dripping or splashing and
never place anything containing water or liquid, such as a
vase, on the product.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
2
KODAK Video Monitor CFH-V15
Regulatory Notices for USA
This equipment has been tested and found to comply
with the limits for a digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
Quick Start Guide 3
KODAK Video Monitor CFH-V15
Camera Mounting
To mount the KODAK Video Monitor
CFH-V15 to a wall, unscrew the base
of the camera and remove the metal
plate.
With the included screws and anchors,
fasten the mounting bracket onto the
wall. Before mounting the camera,
the camera should be plugged into
the AC adapter. Then, reattach the
base cover and screw the stand back
onto the mounting bracket.
4
KODAK Video Monitor CFH-V15
1. iSecurity+ App
To get started, download the
iSecurity+ app from the Apple App
store or the Google Play store.
2. Connect to Power
Remove the mounting plate from the
bottom of the camera. Then, connect
the KODAK Video Monitor CFH-V15 to
the AC power adapter, and plug the
power cord into the electrical outlet.
Quick Start Guide 5
KODAK Video Monitor CFH-V15
3a. Wi-Fi Setup Mode
The camera will automatically go into
setup mode. The “Wi-Fi Setup” LED
on the front of the camera will blink
and alternate between green and
orange. The KODAK Video Monitor
CFH-V15 will rotate when the camera
is ready for setup (this may take up
to 2 minutes when the camera is first
powered on).
6
KODAK Video Monitor CFH-V15
3b. Connect Device to
KODAK Video Monitor CFH-
V15
iOS Android
Before connecting to the camera,
please turn on the Wi-Fi on your
device as well as your personal Wi-Fi
network. Then, go to your device
Settings under the Wi-Fi settings,
connect to the CFH-15XXXX (last 4
digits of the MAC ID, as seen on the
back of the camera) network. Make
sure that you see the Wi-Fi symbol
after connecting to the CAM.
Quick Start Guide 7
KODAK Video Monitor CFH-V15
4a. Launch iSecurity+ App
Once your device establishes its
connection to the KODAK Video
Monitor CFH-V15 (usually takes
around 30 seconds), launch the
iSecurity+ app. If you don’t see the
pop-up prompt, please close the app
and re-launch it. The iSecurity+ app
will automatically detect your
camera. When prompted, click ‘Yes’
to setup your camera.
8
KODAK Video Monitor CFH-V15
4b. Setup Wizard
Follow the instructions in the Camera
Setup Wizard to complete
installation.
Quick Start Guide 9
KODAK Video Monitor CFH-V15
4d. Setup Complete
Once you see the page below, the
setup process has been completed.
Restart iSecurity+ and please log in
again.
You can use your iOS or Android
devices to access the camera
anywhere in the world. Make sure
your phone has access to the
Internet via 3G, 4G or Wi-Fi to
establish a connection.
10
Autres manuels pour CFH-V15
2
Table des matières
Autres manuels Kodak Caméra IP
