Kodak SR series Manuel utilisateur
User’s Manual
SR-Series
MOTION ANALYSIS SYSTEMS DIVISION
EASTMAN KODAK COMPANY
Table of Contents
CHAPTER 1 - INTRODUCTION
Introduction ......................................................................................... 1.1
Table of contents ................................................................................. 1.2
Warranty .............................................................................................. 1.3
How to use this manual........................................................................ 1.4
Precautions .......................................................................................... 1.5
CHAPTER 2 - CONTROLS AND CONNECTORS
Visual introduction .............................................................................. 2.1
Processor.............................................................................................. 2.2
Processor rear panel............................................................................. 2.3
Processor front panel .......................................................................... 2.5
Camera................................................................................................. 2.6
Viewfinder display .............................................................................. 2.7
CHAPTER 3 - OPERATING THE MOTION CORDER SR SERIES
Getting started...................................................................................... 3.1
Preparing to make a recording............................................................. 3.2
Recording ............................................................................................ 3.8
Viewing a recording ............................................................................ 3.9
Using the system menu ........................................................................ 3.12
CHAPTER 4 - RECORDING STRATEGIES
Introduction ......................................................................................... 4.1
How the Processor stores images ........................................................ 4.2
Start...................................................................................................... 4.3
Center .................................................................................................. 4.4
End....................................................................................................... 4.5
Random................................................................................................ 4.6
Choosing a record mode ...................................................................... 4.7
CHAPTER 5 - ROUTINE CARE
Specifications....................................................................................... 5.1
ADDENDUM
Using software command .................................................................... A.1
Status query codes ............................................................................... A.2
(continued)
Table of Contents
Moving Images to your computer........................................................ A.7
Image download utility ........................................................................ A.8
TIFF file format ................................................................................... A.12
SCSI download application note.......................................................... A.17
Chapter 1 - Introduction
Introduction
Table of Contents
Warranty
How to Use This Manual
Precautions
1.1
Introduction
The KODAK Motion Corder Analyzer, SR series is designed to be a valuable
addition to the engineer’s problem solving tool kit. The compactness, ease of
operation, fast framing rates and instant video playback make evaluating your
most difficult motion related problems simple.
The live setup feature allows the user to see the image before recording so that
the time required to solve the problem is minimized. There is no guesswork
about exposure levels or image composition. What the user sees on the video
monitor is what will be captured in memory when the Trigger key is pressed.
The information in this manual will teach you how to operate the KODAK
Motion Corder Analyzer, SR series.
1.2
Warranty
NEW EQUIPMENT WARRANTY
KODAK MOTION CORDER ANALYZER,SR SERIES
Eastman Kodak Company, Motion Analysis Systems Division, warrants this KODAK
Motion Corder Analyzer, Model SR series and accessories manufactured by Eastman
Kodak Company, to function properly for one year from date of shipment, if the war-
ranty registration card was filled out and returned to KODAK San Diego within thirty
days of shipment.
Kodak agrees to perform the following equipment warranty services in the United States.
1. Repair service: If shipped to us, repairs will be made at no charge.
2. Parts replacement: Replacements parts installed under warranty will be provided
at no charge.
THIS WARRANTY DOES NOT APPLY UNDER THE FOLLOWING CONDITIONS:
Failure to operate the KODAK Motion Corder Analyzer, Model SR series in accordance
with Kodak’s written instructions, including environmental specifications listed in the
User’s Manual.
If there is evidence of the KODAK Motion Corder Analyzer, Model SR series being
subjected to accidental damage, misuse or abuse.
If the KODAK Motion Corder Analyzer, Model SR series has been repaired or tampered
with by persons other than Kodak personnel, customer personnel trained by Kodak or
without permission of Kodak.
Shipping damage is not covered by this warranty. The purchaser has the responsibility to
place a claim of damage in shipment with the carrier.
KODAK makes no other warranties, express or implied, including the implied warranties
of merchantability and fitness for a particular purpose. If this KODAK Motion Corder
Analyzer, Model SR series does not function properly during the warranty period,
KODAK will repair it without charge according to the terms stated above. Repair
without charge is KODAK’S only obligation under this warranty. KODAK will not be
responsible for any consequential or incidental damages resulting from the sale use or
improper functioning of this equipment even if loss or damage is caused by the negli-
gence or other fault of KODAK.
Manual Part Number 91000088-002 Rev. A
KODAK is a trademark.
© Copyright Eastman Kodak Company, 1998
1.3
How to Use This Manual
DEFINITION OF TERMS
You will notice as you read this manual that some of the information is pre-
sented as a NOTE, CAUTION or WARNING. It is important that you under-
stand the significance of these three terms.
NOTEA note contains information that we wish to emphasize regarding the operation of
your Motion Corder SR series.
CAUTION
Acautionis intendedtowarnyouthatacertain operationorconditionmaycause
harm to your Motion Corder SR series.
WARNING
A warning is importantto the safety of everyone operating the Motion Corder SR
series and should not be disregarded under any circumstances.
CHAPTER ONE, INTRODUCTION
Contains the Warranty, precautions, introduction and how to use this manual.
CHAPTER TWO, CONTROLS AND CONNECTORS
An introduction to the components of your Motion Corder SR series. Explains
the use of each connector and control on the Camera and the Processor.
CHAPTER THREE, OPERATING THE MOTION CORDER SR SERIES
Explains how to make and playback a recording.
CHAPTER FOUR, RECORDING STRATEGIES
Provides a model for understanding how a solid state recorder works and also
provides the background information for selecting an appropriate record mode.
CHAPTER FIVE, SPECIFICATIONS
Contains specifications.
If you require additional information not included in this manual regarding the
care, technical service and operation of your Motion Corder SR series please
contact our service department in San Diego by calling:
800 - 854 - 7006
1.4
Precautions
TEMPERATURE
The KODAK Motion Corder Analyzer, SR series, is designed to operate satisfac-
torily in an environment where the ambient temperature is between -15 and 35
degrees Centigrade (5 and 95 degrees Fahrenheit), and there is no condensation
present.
STORAGE
Do not store the equipment in an area where the temperature will drop below -20
degrees or exceed 70 degrees Centigrade (-4 to 158 degrees Fahrenheit). Ensure
that moisture does not condense on the system.
SHIPPING
When shipping, use the shipping carton in which the unit was originally deliv-
ered. If you must frequently ship your Motion Corder SR series, you may wish
to purchase an accessory carrying case that has been designed for this purpose.
Do not ship the equipment in an area where the temperature will drop below -20
degrees or exceed 70 degrees Centigrade (-4 to 158 degrees Fahrenheit). Ensure
that moisture does not condense on the system.
1.5
Precautions
FEDERAL COMMUNICATIONS COMMISSION STATEMENTS
WARNING: This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instruction manual,
may cause interference to radio communications. It has been tested and found to
comply with the limits for a Class “A” computing device pursuant to Subpart B
of Part 15 of the FCC Rules and VDE 0871 Class “B”, which are designed to
provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is
likely to cause interference in which case the user at his own expense will be
required to take whatever measures may be required to correct the interference.
This device complies with Part 15 of the FCC Rules and VDE 0871. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including
interference that may cause undesired operation.
WARNING
This product is grounded through the power cord. This protective ground con-
nection is essential for safe operation of the equipment. Avoid electrical shock
by plugging the power cord into a properly wired receptacle. A loss of the pro-
tective ground, for any reason, could result in electrical shock. Use the proper
power cord and insure that it is in good condition.
CAUTION
To avoid the risk of fire, use the fuse specified for the equipment. The proper
fuse is listed on the back panel of the equipment. To avoid the risk of an explo-
sion, do not operate this product in an explosive atmosphere.
Chapter 2 - Controls and
Connectors
Visual Introduction
Processor
Processor Rear Panel
Processor Front Panel
Camera
Viewfinder Display
Table des matières
Manuels Instrument analytique populaires d'autres marques
EXTOL PREMIUM
EXTOL PREMIUM 8820043 Instructions d'installation et d'utilisation
RIDGID
RIDGID SeeSnake Compact Manuel utilisateur
Teledyne
Teledyne 3000PA Manuel utilisateur
YDLIDAR
YDLIDAR TIA Manuel utilisateur
Olympus
Olympus IPLEX FX Series Manuel utilisateur
Bosch
Bosch GLM 50 C Professional Manuel utilisateur
