KOCOM KDP-601A Mode d’emploi
Thank you very much
for purchasing KOCOM
Doorphone.
please read this manual
thoroughly to ensure
correct usage,
before operating
DOORPHONE
KDP-601A/601D
MANUAL FOR OPERATION AND INSTALLATION
Gentle electronic chime sound.
KDP-601A: AC 220V (only) or 110V(only)
KDP-601D: Used DC 6V (4Piece of 1.5V batteries
into housing, lasts 10months)
Communication range:
0.65mm wire,
300m line
Can be combined with door opener.
Easily mounted on wall,desk
Features
Power Lamp
Indoor station Outdoor station
DOOR OPEN
Handset
B
E
N
Z
E
N
E
T
H
I
N
N
E
R
Keep away from humidifier and
stove. High temperature and
humidity can cause malfunction
When cleaning, never use wet
hands, volatile benzene or paint
thinner.
Maintain the product clear by
frequently cleaning with soft
cloths
As this device consists of precise electronic components, and high voltage is generated
internally, do not attempt to disassemble.
Do not drop lndoor station, and
avoid strong impact.
Precautions for Operation
How to operate (Instruction for operating)
Name of Each Part
♪
♫
Pick up the handset and
communicate with a
visitor. After end of
communication, return the
handset where it is locked
The indoor station
is ringing.
To release the door, press
the “Door Key” button
When a visitor
pushes the outdoor
station bell,
Call Button
DS-2D
MS-2D
C-Mic
Speaker
Volume
Switch
Installation
Specifications
Wring Diagram
Component
Description KDP-601A (AC) KDP-601D (DC)
Electric source AC 220V(only) or 110V(only) DC 6V(LR6-AA 1.5V X 4)
Consumption Unload: 0. 5W In load: 3. 3W Un load: 0. 5mW In load: 0. 6W
emihCemihCdnuoSlangiS ytiralopderiW2ytiralopderiW2gniriW
Range 300m(ø0.65mm) 300m( ø0.65mm)
• • •
•
Master station for indoor-use Out door pannel Wall hanger for master station
Doorlock(Option)
1:1 TYPE
KDP-601A or KDP-601D
MS-2D or DS-2D
A- Choose a place on the wall where you
want to hang the Indoor station.
B- Fasten the wall hanger on the wall.
C- Indoor station can be hung on the wall
hanger easily now.
Installation of Indoor station Installation of outdoor station
After attaching the body supporter with 2screws,
put the indoorstation into the grooves of body
supporter,and then fix it with screws.
PRODUCT
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY
AGENCY ADDRESS
KOCOM Warranties the original purchaser of this product as follows.
1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect, KOCOM
will repair it within one year from date of purchase free of charge.
3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment, by consumer.
b. Breakdown caused by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
04.06
To receive after sales service, have the following ready when
you contact our branches
1. Name of the product
2. Model number of the product
3. The area of problem
4. Phone number and address at
which you can be contacted.
Warranty
Warranty Card
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels KOCOM Système d'interphone
KOCOM
KOCOM KCV-A374SD Manuel utilisateur
KOCOM
KOCOM KIP-501PM Mode d’emploi
KOCOM
KOCOM KIP-304 Manuel utilisateur
KOCOM
KOCOM KCV-544 Manuel
KOCOM
KOCOM KLPD410 Mode d’emploi
KOCOM
KOCOM KCV-434SD Manuel
KOCOM
KOCOM DS-4M Manuel utilisateur
KOCOM
KOCOM KDP-601AM Mode d’emploi
KOCOM
KOCOM KC-C60 Manuel
KOCOM
KOCOM KVM-301 Manuel
KOCOM
KOCOM KDP-Q81F Manuel utilisateur
KOCOM
KOCOM KLP-100 Mode d’emploi
KOCOM
KOCOM KVM-514GS Manuel
KOCOM
KOCOM IP-201P Mode d’emploi
KOCOM
KOCOM KDP-501A Mode d’emploi
KOCOM
KOCOM KCV-401EV Manuel
KOCOM
KOCOM KDP-603 Mode d’emploi
KOCOM
KOCOM KC-C60 Manuel utilisateur
KOCOM
KOCOM KIP-601PM Mode d’emploi
KOCOM
KOCOM KIP-120 Mode d’emploi
