Knaack 118-01 Manuel utilisateur

Werner Co. 7

93 Werner Rd. 888-523-3371 toll free/ llamada gratuita

Greenville, PA 16125 888-456-8458 fax

118-01 DATAVAULT

118-02 DATAVAULT - BARE

INSTALLATION MANUAL

JOBSITE STORAGE SOLUTIONS

ALWAYS ON THE JOB™

Page 2

ENGLISH

NOTICE

ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS

AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS

PRODUCT.

Tools Required

• 9/16” SOCKET

• 9/16” WRENCH

• 5/16” SOCKET

• 7/16” SOCKET

• 7/16” WRENCH

• SCREWDRIVER, STRAIGHT BLADE

• SCREWDRIVER, PHILLIPS HEAD

Parts List

• MODEL 500 POWER CREW * QTY. 1

• MODEL 497 LIFT BRACKETS* QTY. 1

• BRACKETS, SCREEN MTG. QTY. 2

Bolt Kit #32-1180

• BOLT, M4 X18MM PHILLIPS HEAD QTY. 4

• BOLT, M4 X30MM PHILLIPS HEAD QTY. 4

• Bolt, M6 x 12MM PHILLIPS HEAD QTY. 4

• BOLT, M6 x 30MM PHILLIPS HEAD QTY. 4

• BOLT, M8 x 35MM PHILLIPS HEAD QTY. 4

• WASHER, LOCK ¼” QTY. 4

• WASHER, FLAT 1/4 QTY. 4

• WASHER, #10 QTY. 4

• WASHER, LOCK 5/16” QTY. 4

• SCREW, #10-24 x ¾” HEX HEAD QTY. 4

• BOLT, 1/4-20 x 5/8 HEX HD QTY. 2

• NUT, WHIZ 1/4-20 QTY. 2

• SHIM, HORSESHOE 1/16” THICK QTY. 12

• SHIM, HORSESHOE ¼” THICK QTY. 4

* NOTE: FOR INSTALLING BOTH THE MODEL 500 POWER CREW, AND THE 497

LIFT BRACKETS, REFER TO THE INSTRUCTION SHEETS INSIDE EACH KIT.

TV Specications (not included in 118-02 but must meet these specs)

• 40” TV

• HXWXD – 25”X40”X4” MAX

• MINIMUM OF 2 HDMI PORTS

• VGA PORT (PC INPUT)

Data Vault

USER INSTRUCTIONS

Page 3

ENGLISH

Contents

I. INSTALLING A LARGE SCREEN...................................................................... 4

II. 3 POSITION HATCH FEATURE........................................................................ 6

a. Working Position ......................................................................................................6

b. Open Position ..........................................................................................................6

c. Closed Position........................................................................................................6

III. LOCKABLE HATCH......................................................................................... 7

IV. FILTERED FAN MOTOR .................................................................................. 7

V. INSTALLING A PRINTER ................................................................................. 8

VI. INSTALLING USB SWITCH ............................................................................ 8

VII. INSTALLING POWER STRIPS....................................................................... 9

VIII. INSTALLING A COMPUTER ......................................................................... 9

a. Tower Computer .......................................................................................................9

b. Laptop.....................................................................................................................10

c. Tablet .......................................................................................................................10

IX. DRAWER ADJUSTING:..................................................................................10

a. Drawer Removal and Installation..........................................................................10

b. Drawer Slide Install................................................................................................10

X. INSTALLING STRAPS:....................................................................................11

Page 4

ENGLISH

CAUTION

Any modication or unintended use of this product shall immediately

void all manufactures warranties. Manufacture disclaims all liability

for injuries to persons or property resulting from any modication to,

or unintended use of this product.

CAUTION

Prior to drilling to keep debris out of your eyes, always wear protective

eye wear. Failure to head may result to death or serious injury.

I. Installing A Large Screen

a. Using the 5/16” socket remove the four

#10-24 x 3/4” Hex head screws. Holding

the acrylic window in place, Set window

aside being careful not to scratch it.

(SEE FIG. 1)

b. Place screen to be installed face down

on a at surface. Install the two screen

mounting brackets (SEE FIG. 2) to the

back of the screen. Four M4, four M6,

and four M8 bolts are provided to bolt the

brackets to the screen. In the case that the

back of the screen is not at, spacers have

been provided to create a at surface. Also,

the depth of TV mounting holes varies by

model. Use spacers to shim brackets as

necessary to prevent bolts from bottoming

out. Place spacers as needed between the

screen and the mounting bracket. (FIG. 2)

ROUND HOLES

TO BE MOUNTED

ON THE TOP OF

THE SCREEN

Data Vault

USER INSTRUCTIONS

Page 5

ENGLISH

c. Once screen has been mounted to the

brackets, attach HDMI (2) and VGA(1)

cables to the back of the screen (FIG.3).

d. Plug screen and fan power cords into

extension cord (SEE FIG. 4). Route

extension cord through cord pass

through in back of enclosure. After

enclosure installation, route extension

cord through cable channel at rear of

the 118 to the central compartment

and plug into power strip. Switch on

powerstrip may be turned on and off to

control fan and screen power.

e. Place screen onto the channel inside

the enclosure. The channel has been

pre-punched to accept all standard

vesa mounting dimensions. Engage

brackets with brackets mating to the

slots on the channel. (SEE FIGURES

5 AND 6)

f. Replace the window using the four

screws and washers originally removed,

along with four more provided inside

the bolt kit. Be careful not to overtighten

the screws.

Page 6

ENGLISH

g. Attach screen mounting brackets

through the coresponding holes in the

bottom of the enclosure using two 1/4-

20 x 5/8 bolts and 1/4-20 whiz nuts.

II. 3 Position Hatch Feature

The keyboard hatch can be positioned in 3 places, working, open and

closed.

a. Working Position

With the rod placed fully forward,

the keyboard will be level, while still

providing a at work surface above.

b. Open Position

With the rod placed in notch, the hatch

will be held open allowing you a larger

access to items stored under the hatch.

Data Vault

USER INSTRUCTIONS

Page 7

ENGLISH

c. Closed Position

Lift rod out of the notch and hold rod in

location shown, slide the rod rearward

to allow the hatch to close.

III. Lockable Hatch

Hatch can be locked to protect valuables

while momentarily away. Simply attach any

padlock through the locking tab and loop of the rod.

IV. Filtered Fan Motor

CAUTION

When fan is in use, the upper compartment doors must also be

open to cool efficiently.

A fan motor has been included inside the screen enclosure to help

circulate air, and keep temperatures lower inside enclosure. This motor

is ltered and will need occasional maintenance to keep lter clean.

Page 8

ENGLISH

a. Filter is located to the lower right side of enclosure.

b. Un-snap lter cover as shown

c. Remove cover and remove lter. Clean

lter with water and squeeze out

excess water before installing lter

back onto fan. To avoid damaging the

fan and screen, never run fan without

the lter installed.

V. Installing A Printer (printer not included in 118-02)

a. Install lose drawer into pre-installed drawer slides. Refer to drawer

removal instructions on page 10.

Data Vault

USER INSTRUCTIONS

Page 9

ENGLISH

b. Plug the power cord and USB

connection into back of printer and

place printer on upper shelf in left

compartment. Route the power

cable through center dividing walls

into compartment on right side. Plug

power into UPS in the surge protector

without battery backup.

VI. Installing USB Switch

(not included in 118-02)

Install USB switch in central compartment.

Attach 2 USB-BM cables into switch.

a. Install USB hub, connecting USB hub

computer port/connector into USB

switch.

b. Plug USB-AM cable (from

printer) into USB hub.

c. Other computer USB devices

such as a keyboard and

mouse may be installed at

this time.

Page 10

ENGLISH

VII. Installing Power Strips

(not included in 118-02)

a. Install both power strips into the 118-01.

Place one in the central compartment

and route the cord through the cable

channel to the lower compartment.

Place the second in the lower

compartment.

b. Prior to installing the UPS power

system, it needs to be charged for several hours.

c. Install UPS device into right lower compartment on shelf.

d. Plug the UPS power system into one of the GFCI slots in the

powerstrip.

e. Plug both power strips into UPS power system power backup and

surge protection slots.

VIII. Installing a Computer

a. Tower Computer

Install tower computer on the lowest

shelf in the left lower compartment.

Route power cable through hole in the

middle panel and plug into power strip.

Connect USB and HDMI or VGA cable.

b. Laptop

To use laptop, connect the HDMI and USB cables.

c. Tablet

To use tablet, connect any necessary adapter to HDMI and connect

to tablet.

IX. Drawer Adjustment:

If you need to move any of the bottom drawers, to t your printer or

computer, follow these instructions:

Autres manuels pour 118-01

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Knaack Alimentation

Knaack

Knaack PowerCrew 500 Manuel utilisateur

Manuels Alimentation populaires d'autres marques

Monacor

Monacor PS-12CCD Manuel utilisateur

VOLTIMA

VOLTIMA MagicBox 15 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6032A Manuel utilisateur

Miller

Miller Auto Deltaweld 452 Manuel utilisateur

BCP

BCP PUOUBK Feuille d'instructions

HC 2210 Manuel utilisateur

Puls

Puls CT5.241 Manuel utilisateur

OCZ

OCZ ZX1250W Manuel utilisateur

iseg

iseg ECH 238 Manuel utilisateur

Power

Power XXL A Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 6631B Manuel utilisateur

Renogy

Renogy PHOENIX 300 Manuel utilisateur

HP 6200B Manuel de service

Epson

Epson Stylus Scan 2500 Manuel d'utilisation

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manuel utilisateur

Puls

Puls MiniLine ML50.100 Manuel utilisateur

Puls

Puls AS-Interface SLA4.100 Manuel utilisateur

Kenwood

Kenwood PS-60 Manuel utilisateur