Kleinwächter PGT 51 Manuel utilisateur
MANUAL
Personal
Grounding
Permanent Personal Grounding Tester
MANUAL
Grounding
Tester PGT
5
Permanent Personal Grounding Tester
(PGT 52 includes Relay Output)
5
1 (52)
2 Manual PGT 51 (PGT 52)
Contents
Description ....................................................................................................................................................................... 2
J MPER .............................................................................................................................................................................. 2
Legend .................................................................................................................................................................................... 3
Function ................................................................................................................................................................................. 3
Relay Output (only PGT-52) ..................................................................................................................................... 4
Specifications ....................................................................................................................................................................... 4
Operating Instruction ....................................................................................................................................................... 5
Measure Operating ............................................................................................................................................................ 6
short instruction ............................................................................................................................................................ 6
Limits (JUM1 OFF) ......................................................................................................................................................... 6
Delivery parts ...................................................................................................................................................................... 6
Limits Adjust ........................................................................................................................................................................ 7
Procedure ......................................................................................................................................................................... 7
Calibration............................................................................................................................................................................. 8
Suggested calibration cycles: .................................................................................................................................... 8
Guarantee Items ................................................................................................................................................................. 8
Different Versions: ............................................................................................................................................................. 8
Description
The instrument is for permanent grounding monitoring of persons with wrist straps.
During this the capacitive resistance to earth is measured.
The unit is mounted on the workplace. The grounding must be connected to the grounding point
of the table or table mat. Only use included power supply plug.
Limits can be changed by user very easy. It can be done by calibrated resistors or by a reference
wrist strap.
By doing it with calibrated resistors it is an easy and cheap calibration of the unit.
The version PGT 52 also includes a potential free relay contact. This can be select as “o.k”. or
“Alarm” Output by jumper.
JUMPER
J M1 OFF (open) Calibrate limits by RRP-50 Calibration box
ON (closed) Calibration with reference wrist strap
Only PGT 52:
J M2 OFF (open) Relay Mode = Alarm (Relay turns on if not o.k.)
ON (closed) Relay Mode = o.k. (Relay turns on if o.k.)
J M3 OFF (open) delay time to turn on by Alarm mode 10 seconds
ON (closed) no delay time for relay
3 Legend
Legend
7 6
3
8 6
2 4 5 1
1 Popper 10mm to connect the wrist strap
2 Popper 10mm (3,5mm) to park the wrist strap cable
3 Grounding cable
4 LED “Alarm” (red)
5 LED „o.k.“ (green)
6 Power connector
7 Switch „H“
8 Relay Output (only PGT 52)
Function
ABS Plastic housing with connector for one wrist strap (WST) with 10mm popper
Permanent grounding monitoring, which means the unit recognizes whether the wrist strap
is applied. The result is shown by two LED´s
green LED : flashes : WST in Park position
shines : WST applied and into the limits
red LED : flashes : WST resistor to low <
shines : WST resistor to high >
or WST wrong connect to the wrist
There is a buzzer also included for an acoustic signal delayed 10s after the red „Alarm“ LED
If the user leaf the working place he has to disconnect the cable at the wrist strap and place it on
the „PARK“ popper rat the unit.
The green LED will flash by 1Hz and there is no more monitoring
4 Manual PGT 51 (PGT 52)
Relay Output (only PG -52)
The Relay function can be select by jumper J M2 ::
J M2 OFF (open) Alarm relay Relay switchs on together with the buzzer (J M3=ON)
Otherwise (J M3=OFF) the relay switchs on 10seconds
delayed after the buzzer.
J M2 ON (closed) „OK“ Relay Relay always switches on when green LED shines (o.k.)
Specifications
Dimension (L x B x H): 96mm x 60mm x 23mm (L x B x H)
Weight : app. 150 g
Power Su ly: Power plug 7,5V-9V= / 150-200mA
Dis lay: 1 LED green, 1 LED red, 1 buzzer
Relay Out ut: (PGT-52) Potential free Relay Contact (Switch ON)
maximum load = 10W
max =60V Imax= 500mA
Measure Princi le : Capacitive measuring
Measure Voltage: Max. 5V ~2,5kHz
Connection: 3,5mm Socket - 10mm(3,5mm) Popper
Limits: Adjusted by using the RRP Box
(ohmic resistor)
or with a reference wrist strap
Lower limit: 0....1MOhm*
U er limit: 2....10MOhm*
* only by JUM1 open
Other limits available !
5 Operating Instruction
Operating Instruction
WST – Cable in „PARK" Position WST – Cable connected to the wrist strap
Mount the unit with the power strips at the working place.
Connect the grounding cable to the reference grounding point at the table or table mat.
Connect a wrist strap cable to the „PARK“ position.
After connecting the power supply the unit switches into the stand by modus.
The „Park“ position is shown by flashing the green LED o.k. with app. 1Hz.
If the cable is disconnected from the „Park“ position the measure starts after 10 seconds.
Now it will be permanent measured whether the grounding is into the select limits.
The instrument really measures the capacitive resistor but is calibrated by a ohmic resistor
the actually limit can´t be definite exactly. But we have a reproducible measure.
Is the measure result into the limits the green LED will shine.
(PGT 52) by „OK“ – Relay Mode (JUM2 ON) the Relay switchs on together with the green LED !
If the measure result is out of the limits the green LED switch off and the red LED define it like:
Flash frequency ~1Hz : WST resistor to low <
shines : WST resistor to high > or WST wrong connect
Additional to the red LED the buzzer sounds after 10 seconds.
(PGT 52) Relay By „ALARM“ – Relay Mode (JUM2 OFF) the relay switch on together with the
buzzer:
by JUM3 OFF
10 seconds delayed
by JUM3 ON
directly
There is permanent measure as long as the WST is not connecting to the „Park“ position.
6 Manual PGT 51 (PGT 52)
Measure Operating
short instruction
At the bottom
Limits
(JUM1 OFF)
The lower and upper limit will be
Limits :
lower limit
upper limit
additional limits
Delivery parts
PGT-51 2 in
clude grounding cable with ring connector
Power plug 7,5V-9V= 150-
200mA
Manual
Optional accessories
RRP
lower and upper resistor.
If the green LED shines ==> all is o.k.
If the red LED shines, check the correct position of your wrist strap
The measure starts automaticly after 10 seconds
Connect it to the popper on your wrist strap
Disconnect the wrist strap cable from Park position
At the bottom
of the
housing there is a short user manual !
The lower and upper limit will be
calibrated by the RRP 50 box..
lower limit
< 750 kOhm
upper limit
> 3,2 MOhm
additional limits
available !
clude grounding cable with ring connector
200mA
RRP
-50 Reference resistor box with
lower and upper resistor.
(JUM1 OFF)
If the green LED shines ==> all is o.k.
If the red LED shines, check the correct position of your wrist strap
The measure starts automaticly after 10 seconds
Connect it to the popper on your wrist strap
Disconnect the wrist strap cable from Park position
housing there is a short user manual !
7 Limits Adjust
Limits Adjust
Switch H ⇓
You need : Pin or small screw driver,
by J M1 OFF: Reference resistor box RRP-50 for lower ( GW)
and upper (OGW) Limit.
Measure cord with 4mm Plug
by J M1 ON: New Reference wrist strap same as you will use
later
Procedure
•disconnect the power plug, Grounding cable must be connected
•Connect RRP-50 to the 10mm WST popper
•Press and hold with a Pin the hidden switch (H)
•connect the power plug and release switch (H)
LED o.k. green on
RRP-50 lower GW connect to ground
No WST connect Measure input free
Presses briefly switch „H“
LED o.k. green and LED nok red shine
RRP-50 upper OGW connect to ground
connect reference wrist strap from your arm
Presses briefly switch „H“
LED o.k. green und LED nok red flashes alternate
Disconnect RRP-50
Presses briefly switch „H“
LED o.k. green shines and LED nok OFF
Reset disconnect power plug briefly
If LED nok red shines => Error !
Disconnect power supply and start again !
8 Manual PGT 51 (PGT 52)
Calibration
Since the values are written directly with the adjustment into the EEPROM, the adjustment
of the limits with calibrated resistors is also simultaneously the calibration of the appliance.
In order to return to the norms, the calibrated resistors can be calibrated by the
manufacturer annually.
With these calibrated resistors, all appliances of the customer can then be recalibrated.
Please notice: The ohmic resistor only simulate the capacitive attenuation of a person
wearing the wrist strap.
Suggested calibration cycles:
annual
Guarantee Items
We provide a 24 month guarantee in case of proper application according to the manual.
Excluded of the guarantee are:
Damage by electric shock, wrong grounding and mechanical damage of the device.
The guarantee expires if the device was opened.
Different Versions:
PGT 51 – PGT 52 with 10mm Popper for the Park position
PGT 51/3 – PGT 52/3 3,5mm Popper for the Park position
If you need other poppers or special contacts for your wrist strap
be not hesitate to contact us !
c/o Kleinwächter GmbH 2016
www.kleinwaechtergmbh.de
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Kleinwächter Équipement de test
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
