Kitronik MOVE mini Manuel utilisateur

:MOVE LINE

FOLLOW BOARD

FOR BBC MICRO:BIT

STAY ON TRACK WITH THIS

For Original :MOVE mini

To use with the :MOVE mini,

please see ‘Use with :MOVE

mini’ on the following page.

If you wish to use this board

separately connect the line

follow board to the interface

board in the order shown.

GND 0V

P15 R

3V3 3V

P16 L

GND 0V

BUILD INSTRUCTIONS

To use the Line Following board

with the Interface board, ﬁrst

complete the build instructions

provided with the Interface Board.

NOTE: This kit includes ﬁxings for both the original

:MOVE mini and :MOVE mini Mk2, so there may be spare

components left over after the build.

Remove both the front ‘:MOVE’ piece

and the SERVO:lite board from the

:MOVE mini. Fix the Line Follow board to

the chassis using the two SHORTER M3

countersunk screws. Insert the screws

from above and ﬁx in place with two M3

nuts. The remaining spacers, screws and

:MOVE panel are no longer needed.

Connect the servos and install the Servo:Lite/Interface board

assembly into the :MOVE mini. Reconnect the cables, refer to

step 2 from the ‘Build instructions’ on the previous page.

GET CODING!

Visit kitronik.co.uk/5659 for help. See

the online datasheet for a tuning guide.

USE WITH :MOVE MINI

NOTE: Make sure you use the board the

correct way up, with the larger Kit robot

visible from below and the pins pointing

out of the front of the :MOVE mini.

NOTE: This instruction book is for :MOVE mini Mk1. If you have a Mk2

:MOVE mini, visit www.kitronik.co.uk/5659-mk2.

For more information on RoHs and CE please visit kitronik.co.uk/

rohs-ce. Children assembling this product should be supervised by

a competent adult. The product contains small parts so should be

kept out of reach of children under 3 years old.

Example

Use

STOCK CODE:

5659

TOOLS REQUIRED:

- Small Phillips screwdriver

Add line following to your micro:bit buggy/

robots with the compact Kitronik :Move

Line Following Board For BBC micro:bit,

also fully compatible with :MOVE mini.

KIT REQUIRES:

- 1 x BBC micro:bit

- 1 x :MOVE Sensor Interface

board (optional)

- 1 x :MOVE mini buggy kit

(optional)

INSTRUCTIONS:

This booklet contains build instructions.

For more detailed resources please visit

our website at www.kitronik.co.uk/5659

Autres manuels pour MOVE mini

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kitronik Robotique

Kitronik

Kitronik BUMP AND SPIN BUGGY Manuel

Kitronik

Kitronik 5624-BD Manuel utilisateur

Kitronik

Kitronik BULLDOZER 5671 Manuel utilisateur

Kitronik

Kitronik MOVE mini Manuel utilisateur

Kitronik

Kitronik MOVE Motor Klaw Manuel utilisateur

Kitronik

Kitronik 5335 Manuel utilisateur

Kitronik

Kitronik MOVE LINE 5659 Manuel utilisateur

Kitronik

Kitronik BBC Micro Bit move Mini Mk2 Manuel utilisateur

Kitronik

Kitronik MOVE mini Manuel utilisateur

Kitronik

Kitronik LINE FOLLOWING BUGGY V3 Manuel utilisateur

Kitronik

Kitronik BBC Micro Bit move Mini Mk2 Manuel utilisateur

Manuels Robotique populaires d'autres marques

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Manuel utilisateur

SunFounder

SunFounder PiDog Manuel utilisateur

Universal Robots

Universal Robots UR5 Manuel utilisateur

Universal Robots

Universal Robots E Series Manuel utilisateur

YASKAWA

YASKAWA MOTOMAN-MPL80 II Manuel utilisateur

EFORT

EFORT ECR5 Manuel d'instructions

Epson

Epson C8 Series Manuel utilisateur

WowWee

WowWee ROBOQUAD Manuel utilisateur

Milvus Robotics

Milvus Robotics SEIT 100 Manuel utilisateur

RoboMaster

RoboMaster AI Robot 2020 Standard Version Manuel utilisateur

fischertechnik

fischertechnik Mini Bots Manuel utilisateur

YASKAWA

YASKAWA MA2010 Manuel

Abicor Binzel

Abicor Binzel iCAT mini Manuel utilisateur

ABB

ABB OmniCore E10 Manuel utilisateur

YASKAWA

YASKAWA Motoman DX200 Manuel utilisateur

pitsco

pitsco Tetrix Max Manuel utilisateur

ECOVACS

ECOVACS DEEBOT R95 Manuel utilisateur

Feng Yuan

Feng Yuan Interstellar Warrior Manuel utilisateur