Kirby Morgan KMB 18 Mode d'emploi

KMB 18/28 (BANDMASK)

USER/OPERATOR COURSE

KIRBY MORGAN DIVE SYSTEMS INCORPORATED

MAINTENANCE AND REPAIR

TECHNICIAN TRAINING

Only selected Dive Lab trained Technicians are authorized to teach

the Technicians Course

Only Dive Lab authorized Technicians may teach the KMDSI

Operator/User Course

Course curriculum must be presented within the guidelines set-up in

the repair technician’s guide and slide show

This presentation is available at no charge from www.divelab.com for

the use of Kirby Morgan Customers & users of Kirby Morgan Diving

Equipment ONLY

THIS MATERIAL MAY NOT BE CHANGED OR MODIFIED WITHOUT

PERMISSION FROM DIVE LAB

KMB 18/28 (BANDMASK)

INTRODUCTION

•This course provides guidance on how to

use the KMB 18 and 28

•Use of these masks will vary with the type

of work and environmental conditions

•The basic procedures of donning and

removing masks will be similar for every ob

KMB 18/28 (BANDMASK)

INTRODUCTION

•This class is

intended for divers

who have

previously been

commercially or

militarily trained in

the use of

commercial dive

equipment

KMB 18/28 (BANDMASK)

INTRODUCTION

•Divers trained in the use of previous

Kirby Morgan masks; i.e., KMB 8, 9, 10,

Navy MK 1 mask, Navy MK 21 helmet,

Navy Mk 22 mask, or SuperLite

helmets, will find that KMB 18/28 Band

Masks have the breathing system

controls located in the same position

and operations are similar

KMB 18/28 (BANDMASK)

INTRODUCTION

•Demand regulator and side block components

are designed to work with pressures as low as

90 psig over bottom when diving to depths of

60 fsw or shallower, and as high as 225 psig

O.B. when diving deeper

•This wide operating range allows flexibility

when using various gas supply systems

KMB 18/28 (BANDMASK)

MAINTENANCE AND INSPECTION

•A2.1 inspection and maintenance should be

performed at least annually

•Frequency of maintenance is dictated by

condition revealed during daily/monthly

inspection

•Monthly inspections determine necessity

for overhaul with more accuracy than

simply placing a number of hours of use

KMB 18/28 (BANDMASK)

MAINTENANCE AND INSPECTION

•Masks being used in polluted waters, or

extreme environments, will require more

frequent inspection

•KM18/28 band masks should not be used for

Polluted/contaminated waters

•Hamlets (KM37) are preferred for

Polluted/contaminated waters

KMB 18/28 (BANDMASK)

MAINTENANCE AND INSPECTION

•Side block, Regulator are the same as on the

KM 37/SL 27, parts are interchangeable

•KMB 28’s manufactured before 2004 used

small bore super flow regulator (SL 17 Reg)

•Lexan Face port on KMB 28 is smaller, All

other KM face ports, port retainers are the

same size

Old Plastic Frame Band Masks

Older KMB 28’s, 9’s, and 10’s use smaller face port retainers

•Tab between side

block and port

retainer

•Newer face port

retainers will NOT fit

•This type of frame is

no longer supported

and should be

removed from

service

Autres manuels pour KMB 18

Ce manuel convient aux modèles suivants

Autres manuels Kirby Morgan Instrument de plongée

Kirby Morgan

Kirby Morgan M-48 MOD-1 Manuel utilisateur

Kirby Morgan

Kirby Morgan M-48 MOD-1 Manuel utilisateur

Kirby Morgan

Kirby Morgan SuperMask MOD-1 Manuel utilisateur

Kirby Morgan

Kirby Morgan SuperLite 27 Manuel utilisateur

Kirby Morgan

Kirby Morgan 415-107 Manuel utilisateur

Kirby Morgan

Kirby Morgan 77 Manuel utilisateur

Kirby Morgan

Kirby Morgan 37SS Manuel utilisateur

Kirby Morgan

Kirby Morgan 200-120 Manuel utilisateur

Kirby Morgan

Kirby Morgan M-48 SuperMask Manuel utilisateur

Kirby Morgan

Kirby Morgan KM 97 Manuel utilisateur

Kirby Morgan

Kirby Morgan M-48 SuperMask Manuel utilisateur

Kirby Morgan

Kirby Morgan 17A/B Manuel utilisateur

Kirby Morgan

Kirby Morgan 100-075 Manuel utilisateur

Kirby Morgan

Kirby Morgan EXO Full-Face Mask Manuel

Kirby Morgan

Kirby Morgan KMB 18 Manuel utilisateur

Kirby Morgan

Kirby Morgan SuperLite 27 Manuel utilisateur

Kirby Morgan

Kirby Morgan KMB-18 A/B Manuel utilisateur

Kirby Morgan

Kirby Morgan 525-115 Manuel utilisateur

Kirby Morgan

Kirby Morgan SuperLite 17C Helmet Manuel utilisateur

Kirby Morgan

Kirby Morgan 525-757 Manuel utilisateur

Kirby Morgan

Kirby Morgan EXO-26 Manuel utilisateur

Kirby Morgan

Kirby Morgan EXO original Manuel

Kirby Morgan

Kirby Morgan SuperLite 17B Manuel utilisateur

Kirby Morgan

Kirby Morgan SuperFlow 525-757 Manuel utilisateur

Manuels Instrument de plongée populaires d'autres marques

Sherwood

Sherwood Amphos Manuel utilisateur

Zeagle

Zeagle N2ition Manuel utilisateur

Tusa

Tusa Q 1203 CE Mode d’emploi

Sherwood Scuba

Sherwood Scuba Insight Instructions de montage

SUBMERSIBLE SYSTEMS

SUBMERSIBLE SYSTEMS Spare Air 600 Manuel utilisateur

OCEANS

OCEANS S1 Supersonic Manuel utilisateur

heinrichs weikamp

heinrichs weikamp OSTC 2 Manuel utilisateur

Omer

Omer SP2 Manuel utilisateur

Scott

Scott PRO-PAK Manuel utilisateur

Apeks

Apeks BLACK SAPPHIRE Manuel utilisateur

Waterproof

Waterproof DRYSUIT Manuel utilisateur

Dräger

Dräger PAS AirPack 1 Manuel utilisateur

Dive Lab

Dive Lab KIRBY MORGAN KMB 18 Manuel utilisateur

Ratio Computers

Ratio Computers iDive Manuel utilisateur

Oceanic

Oceanic PROPLUS X Manuel utilisateur

CFA

CFA MSA G1 Manuel utilisateur

Genesis

Genesis Centauri Manuel utilisateur

TREND

TREND GAUGE/60 Manuel utilisateur