Kiperline KL Skyline Gen-9 Manuel utilisateur
KL Skyline Gen-9
Fixed Location
Monitor
User Manual
ii
TABLE OF CONTENTS
Safety Precautions......................................................................iii
Warranty Exclusions....................................................................iv
LCD Pixel Statement................................................................... iv
Disposal of Electronic Equipment............................................. iv
1.1 Content of the Package.......................................................1
1.2 Parts Description.................................................................2
2.1 Connection Description......................................................4
2.2 Extended Dispaly Setting..................................................10
3.1 OSD Menu Description&Setting.......................................14
3.2 Product Specification........................................................18
3.3 Troubleshooting ................................................................19
iiiKL Gen-9 Skyline Monitor
Safety Precautions
• When carrying the monitor, please put it into a protective cover
with glass side inward and avoid pressing the monitor violently and
rubbing the glass surface by any sharp objects.
• The power input specification for the monitor is DC5V ≥2A Or PD
Charging Adatper, if normal power supply inputting the monitor
more than 5V can cause shortages.
•Please do not place the monitor on a shaky or unstable table,
cupboard or trolley and when using the monitor in a moving vehicle
be careful, use a stand to stabilize it or the product may be severely
damaged from overturning or falling.
• Cleaning the Monitor Unplug the power input before cleaning.
Please use soft cloth to clean touch screen. For stubborn stains,
please use lightly-dampened cloth to wipe again. Do not use
benzene, alcohol, thinner, ammonia, abrasive cleaners, compressed
air orother corrosive solvents. These solvents may cause permanent
damage on the screen or leave non-removable stain.
• The product is not waterproof. Don't use it in or near water.
• Do not insert any object into the product's slots or gaps. Do not
disassemble the monitor in any way.
•Do not connect the AC adapter when maintaining the monitor.
•Do not connect the AC adapter when not in use for an extended
period of time.
• Do not abuse the monitor by applying unnecessary force.
•Avoid places of direct sunlight during storage.
•High volume can lead to lasting damage to your hearing. Please
check the volume settings before reproducing any sound.
• Keep this monitor away from children.
iv
Warranty Exclusions
Please read the warranty terms below carefully, and follow the user
manual and precautionary notes. Please keep this manual for
future reference.
We do not warrantee uninterrupted or error-free operation of this
product. The warranty only covers failure/malfunction under normal use
conditions during warranty period. The warranty does not apply to the
following conditions:
• It can't be identified.
• This product has been modified, disassembled, or refitted.
•Display function working normally; variation in appearance (i.e.,
ageing, attrition, scratch, color changing and etc.).
•Any breakdown caused by power supply, (i.e., inputting power over
5V or unsteady current)
•Any damage caused by disoperation or failure to follow this manual
(i.e., plug or unplug the cable in wrong direction and causing damage
on cable or monitor).
•Any damage caused by hitting or cracking monitor accidentally or
purposely, or collapsing or overturning monitor.
LCD Pixel Statement
There is slightly uneven brightness on the screen when displaying
different screen pattern. The LCD screen has 99.99% or more effective
pixels. 0.01% of pixels or less may not light or may light incorrectly. The
monitor uses a high quality LCD panel. Nevertheless, pixels on the LCD
screen may not light or appear as red or black dots. All the above are
normal with the LCD monitor and will not affect the normal usage of the
product. Avoid placing the monitor against sun-light, or it may damage
the monitor. An afterimage of the previous screen may remain, when the
same image is displayed for hours. In this case, the screen is recovered
slowly by turning off the power for afew hours.
Disposal of Electronic Equipment
The electronic equipment and batteries should not be
disposed with household waste but should be left at an
appropriate collection point for recycling.
1KL Gen-9 Skyline Monitor
1.1 Content of the Package
Before you open the packing of the LCD Monitor, please prepare a stable
and clean desk that is near the power plug on the wall for you monitor
and computer.
KL Gen-9 Skyline Monitor * 1
Mini HDMI to
HDMI Cable * 1
USB-C Male to USB-A
Female Converter * 1 Adapter * 1 User Manual * 1
USB-C Data Cable * 1
USB-A to USB-C
Power Cable * 1
2
1.2 Parts Description
1.2.1 Size Diagram
1.2.2 Function Description
Chapter 1: Product Introduction
359.41
[14.15 inch] 10.50
[0.41 inch]
216.51
[8.52 inch]
3KL Gen-9 Skyline Monitor
1. Power LED
•Open - Green
2. Function increase
• Volume, Brightness etc, Hot Key
3.
•Short Press: Open Menu/Enter
•Long Press: Exit
4. USB-C Port
Insert USB-C to USB-A converter, and realize the fuction of USB
wired screen projection. (PS: For IOS device)
5. Mini HDMI port
6. USB-C port
Just support the android device with DP function
7. 3.5 MM earphone output port
8. Stereo Speaker
•4Ω 1.2W *2
1.2.2 Power Supply Connection
• Power by Wall Charger:
Plug the inclued power adapter into AC socket. Connect the USB-C
port on monitor to the power adapter via the power cable.
• PC/Laptop:
Connect the USB-C port on monitor to standard USB port on your
computer via the power cable.
4Chapter 2: Set up
2.1 Connection Description
2.1.1 Wireless Connection
Turn on KL Skyline Gen-9 and make sure it's powered.
For iphone:
1. Open your Wi-Fi settings, find KIPERLINE- and connect using the PSK
on your screen as the password.
2. (For first -time users ONLY) On your browser, type the IP address that
will appear on your monitor screen.
3. Select your own network and wait for the connection to be complete.
4. KL Skyline Gen-9 is ready to use when the image on your screen looks
like the screen below.
5. Find the Screen Mirroring option on your iPhone (normally on the
slide-up or slide-down control panel) and select KIPERLINE-. Wait
for connection.
Connect to Kiperline WLAN
Select Kiperline display to connectClick to turn on Screen Mirroring
5KL Gen-9 Skyline Monitor
For Android:
1. Find Wireless Projection on your phone and enable it (you can find it in
the phone settings or on your Quick-Panel).
2. Wait until KIPERLINE- appears and select it (if you are shown two
options, select the first one, which is for projecting your phone screen on
the monitor).
3. Wait for the connection to be complete.
4. KL Skyline Gen-9 is ready to use.
*If you want to have a TV cast option (first download the appropriate
software for TV Cast) make sure that Skyline is powered on and
connected to your home wifi, I .e. follow the same steps shown in 2.2.1
for iphone.
Turn on Wireless
Projection setting
Select the first
Kiperline display option
6
A tip: For better user experience connect the monitor via cable
when using it with your Window/Mac.
For macOS:
1. Connect your device to the SSID WLAN that appears on the monitor
screen.
2. Turn on Airplay (via settings or with the shortcut on the top right of
your screen).
3. Wait until the monitor is tracked and then click on the device with
Kiperline name. Wait for the connection to be complete.
Chapter 2: Set up
Connect to Kiperline WLAN
Click on Airplay and select Kiperline device
Table des matières
