KIP 770K Manuel utilisateur
KIP 770K User Manual
Version A.1
(1)
Thank you for purchasing the Multi-Function Printer KIP 770.
This Hardware Operation Guide contains functional and operational explanations for the KIP 770.
Please read this Hardware Operation Guide carefully before using the printer.
Please keep this Hardware Operation Guide for future reference.
1. When this product is installed in North America.
This product complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This product may not cause harmful interference, and (2) this product must
accept any interference received, including interference that may cause undesired operation.
2. When this product is installed in Europe
This product complies with the requirements in Pub.22 of CISPR Rules for a Class A
computing equipment.
Operation of this product in a residential area may cause unacceptable interference to radio
and TV reception requiring the operator to take whatever steps are necessary to correct the
interference.
Do not install Machine around other electronic equipment or other precision instruments.
Other equipment may be effected by electrical noise during operation.
If the product is installed near other electronic equipment, such as a TV or a radio,
interference to said equipment, such as noise or flickering, may occur.
Use a separate power line and install the PRINTER as far as possible from said equipment.
The International ENERGY STAR ® Office Equipment Program is an international program that
promotes energy saving through the penetration of energy efficient computers and other office
equipment. The program backs the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which business proprietors can
participate voluntarily. The targeted products are office equipment such as computers, monitors,
printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are
uniform among participating nations.
The symbol shown indicates that this product conforms to Directive
2012/19/EC of the European Parliament and the council of 4 July
2012 on waste electrical and electronic equipment (WEEE) and does not
apply to countries outside of EU.
KIP 770 is an ENERGY STAR qualified multifunction equipment.
The symbol shown indicates that this product conforms to
SJ/T11364-2006 of People’s Republic of China Electronic
Industry Standard and does not apply to countries outside of
People’s Republic of China.
The symbol shown indicates that this product conforms to GB
18455-2001 11364-2006 of National Standard of the People’s
Republic of China and does not apply to countries outside of
People’s Republic of China.
(2)
Safety Warnings
The following warnings are very important in order to safely use this product.
These notes are important in preventing danger to the operator or operation of the printer.
The following symbols are found throughout the USER’S Manual and have the following meaning:
WARNING
This WARNING mark means that there is a possibility of death or serious
injury if you ignore or do not follow the said instruction.
CAUTION
This CAUTION mark means that there is a possibility of injury or physical
damage if you ignore or do not follow the said instruction.
When marked with this symbol, “DO NOT ATTEMPT”
When marked with this symbol, “pay close attention to”
(3)
WARNING
1. The Power source should be as follows:
In U.S.A. : 120V plus/minus10%, 50/60Hz, 15A or higher
In Europe : 220-240V plus6% or minus10%, 50/60Hz, 10A or higher
2. Use a circuit with a dedicated breaker.
3. Install the product as close to the wall outlet as possible.
4. If you wish to move the printer, please contact your service personnel.
Ground the product with a correct ground source or you may be electrically
shocked.
1. Do not plug in the printer into a multi-wire connector in which some other
equipment is plugged into.
It may cause a fire due to outlet overheating.
2. Do not damage the Power Cord by stepping on or placing heavy items
on it.
If the Power Cord is damaged, it may cause a fire or you may receive
an electric shock. REPLACE THE CORD IF DAMAGED!
1. Do not put a flower vase, a flowerpot or any water-filled item on the
product.
Spilt water could cause a fire or an electric shock.
2. If the product generates an abnormal smell or noise, turn it off and
unplug it from the wall electrical outlet immediately.
1. Do not remove the screw and do not open the cover if not instructed to
do so in this User’s Manual. If you ignore this warning, you may be burnt
or receive an electric shock due to a hot item or electrically charged part
inside of the printer.
2. Do not disassemble or tamper with the printer.
It may result in a fire or an electrical shock.
Do not throw the toner into a fire or other sources of heat, as it can
explode.
(4)
CAUTION
There are hot items inside of the printer.
Take great care not to touch these items when you remove mis-fed media.
Do not pull the cord when you unplug the printer as you may damage the
Power Cord.
Do not install the printer in a humidified room or a dusty room.
Also, do not install the printer on an unstable floor as injuries may occur.
1. Unplug the printer before you move it.
The power cord may be damaged and it may result in a fire or electric
shock.
2. If you do not use the printer for a long duration (holidays, company
shutdown) turn off and unplug the printer from the outlet for safety.
Ventilate the room well if you print in a small area.
The shipment package includes several tools (Wrench, etc) that are
designed for only unloading, installing, uninstalling the machine.
Use only for intended purpose.
(5)
POWER CORD INSTRUCTION
The installation of (or exchange to) a power plug which fits in the wall outlet of the
installation location shall be conducted in accordance with the following:
WARNING
Select a power plug which meets the following criteria;
- The plug has a voltage and current rating appropriate for the product’s rating
marked on its name plate.
- The plug meets regulatory requirements for the area.
- The plug is provided with a grounding pin or terminal.
If the appropriate plug does not fit the wall outlet in the installation, the customer shall
install an appropriate outlet.
Connector Type:
Configuration Standard Rating Usually found in
IEC60320:C13 10A 250V (IEC)
15A 125V (UL)
Plug Type: Model Rating 220-240V
Configuration Standard Rating Usually found in
CEE7/7 10A 250V European countries
KS C 8305 10A 250V Korea
AS/NZS 3112 10A 250V Australia
New Zealand
GB1002
GB2099.1
10A 250V China
IRAM 2073 10A 250V Argentina
BS 1363 10A 250V United Kingdom
SASO 2203 10A 250V Saudi Arabia
BS 546A
IS-1293
SABS-1293
15A 250V United Kingdom
India
South Africa
SEV 1011 10A 250V Switzerland
Chapter 1 Before Use 1-1
Chapter 1
Before Use
page
1. 1 Installation Requirements 1- 2
1. 2 Originals Prohibited from Duplication 1- 3
1. 3 Features 1- 4
1. 4 Specifications 1- 5
1. 4. 1 General 1- 5
1. 4. 2 Printer part 1- 6
1. 4. 3 Scanner part 1- 8
1. 5 Appearance 1- 9
1. 5. 1 Front view 1- 9
1. 5. 2 Rear view 1-10
1. 6 Specifications for the Scan Original 1-11
1. 6. 1 Original Standard 1-11
1. 6. 2 Special Documents 1-11
1. 6. 3 “Do Not Scan” Originals 1-12
1. 7 Specifications for the Printing Paper 1-15
1. 7. 1 Papers not available to use 1-15
1. 7. 2 Keeping the paper in the custody 1-16
1. 7. 3 Treatment against environmental condition 1-17
Chapter 1 Before Use 1-2
1. 1 Installation Requirements
The following conditions are required for the installation of the equipment.
1. Power source should be rated as:
U.S.A: 120V +/-10%, 50/60Hz, 15A or higher
Europe: 220-240V +6% or -10%, 50/60Hz, 10A or higher
2. The equipment must be on a dedicated circuit.
3. The outlet must be near the equipment and easily accessible.
I Norge: Kan kobles til IT strøm distribusjonssystemer.
1. Make sure to connect this equipment to a properly grounded outlet.
2. The outlet shall be installed near the equipment and shall be easily accessible.
Site Environmental Conditions
Temperature Range : 10 °C to 32 °C / 50 F to 89.6 F
Humidity Range : 15% to 85% RH. (NON CONDENSING)
Keep the printer away from water sources, boilers, humidifiers, refrigerators or kerosene (oil) stove.
.
1. The installation site must not have any open flames, dust or ammonia gases.
2. The equipment must not be exposed to the air vents from heating/cooling systems.
3. The equipment should not be exposed to the direct sunlight. Please draw curtains to
block any sunlight.
When you open the printer (Upper Half), do not expose the Photoconductive Drum to
strong (intense) light as this will damage the Drum.
Ozone will be generated while this equipment is in use, although the quantity generated is
within all safe levels. (see certifications)
Ventilate the room, if so required.
Keep ample space around the equipment to ensure comfortable operation.
The floor must be level and the strength must be ample to sustain the weight of the equipment.
KIP 770
20cm/8” or larger
20cm/8” or larger with no option
10cm/4” or larger
10cm/4” or larger
(Front)
(Rear)
Chapter 1 Before Use 1-3
1. 2 Originals Prohibited from Duplication
It is not necessarily allowed to copy every kind of original.
You may be punished by the law if only you possess the copy of some kind of original.
We recommend you to consider enough before you copy such original.
[Originals prohibited from copying by the law]
1. It is not allowed to copy Currency (Bill, Money, Bank Note, etc.), Government issued
Negotiable Instruments (National Bonds, Security, Local Debt Bonds, etc.).
2. It is not allowed to copy Foreign Currency or Foreign Negotiable Instruments.
3. It is not allowed to copy unused postal stamps or government postcards without permission
to make replica from Government.
4. It is not allowed to copy Government issued revenue stamps, certificate stamps which are
prescribed by Liquor Tax Act or the Commodity Tax Act.
[Special items to be cared]
1. It is warned by the government to copy private issued securities (stock certificate, draft,
check, goods ticket, etc.), commutation ticket or book of tickets, excluding that some specific
company copies such originals as many as it requires for its own business.
2. We recommend you not to copy freely such originals as government issued passport, public
or private issued licenses, automobile inspection certification, IDs and tickets like pass or
meal.
Reference Law Prohibited items to copy
Regulations to control fake currency and
Bond.
Currency (Bill, Money, Bank Note, etc.),
Government issued Negotiable Instruments
(National Bonds, Security, Local Debt Bonds,
etc.)
Control Law against Forged & faked
Foreign Currency, Bill, Bank Note and Bond
Foreign Currency or Foreign Negotiable
Instruments
Forged postal stamps control law Unused postal stamps or government postcards
Forged revenue stamps control law Government issued revenue stamps, and
certificate stamps prescribed by Liquor Tax Act
or Commodity Tax Act
Currency similarity securities Control Law Private issued securities (stock, draft, check,
goods ticket, etc.), commutation or book tickets
[Originals protected by the copyright]
It is prohibited to copy such originals as book, music, paintings, printed copy, maps, drawings,
movie and pictures which are protected by the copyright, except for personnel or family use or
similar purpose.
Chapter 1 Before Use 1-4
1. 3 Features
(1) KIP 770 is a Multi-Function Printer for scan, copy and print large format documents. Some of
these features may be optional.
(2) Front loading - front delivery structure saves the installation space.
(3) Various media source; roll media feeding (1 roll), cut sheet manual feeding, Paper Tray multiple
cut sheet feeder (option).
(4) A dedicated printer stand offers easy print handling with the print basket. The KIP 770 is also
suitable for your office layout as a desktop MFP.
(5) The operation speed is 40mm/s (2.9 D landscape / 2.8 A1 landscape per minute).
(6) The maximum print width is 914mm / 36” wide, and the minimum one is 210mm or 8.5”.
The maximum print length is 2,400mm (for A0 / 36” wide media), and the minimum one is
297mm or 11”.
(7) Up to 600dpi print resolutions with an enhanced scanning system produces the highest quality
images controlled by an advanced KIP Image Process System.
(8) The combination of KIP Contact Development System and mono-component minute toner can
produce a high definition line, distinctive grayscale and consistent solid black.
The KIP HDP process generates no Waste Toner.
(9) Easy access to USB port allows users to provide efficient productivity by using “File to Print” /
“Scan to USB” (option).
(10) KIP 770 adopts 12.1 inch screen for the UI, wider than 8.5 for our old products.
The capacitive multi-touch screen offers smooth, various and intuitive user operation that a
pressure sensing device lacks.
Table des matières
Autres manuels KIP Imprimante tout-en-un
Manuels Imprimante tout-en-un populaires d'autres marques
Triumph Adler
Triumph Adler DC 2016 Manuel
Epson
Epson WorkForce WF-2510 Guide de l'utilisateur
Epson
Epson Stylus Scan 2000 Manuel d'installation et d'exploitation
Epson
Epson PictureMate Snap PM 240 Mode d’emploi
Konica Minolta
Konica Minolta bizhub C35 Manuel utilisateur
Brother
Brother MFC-J430w Manuel utilisateur
