Kino Flo FreeStyle Mini LED Kit Manuel utilisateur

Operation Manual

FreeStyle Mini LED

& T41/ T21 LED

Part No. 3100124 Rev A 10-17-2019

CFX-F481

CFX-F10

(True Match

Firmware 4.0)

(Camera)

LED-120X

FreeStyle Mini Kit Components

LED-120X-120U

FreeStyle 120 LED DMX Controller, Univ 120U

LED-120X-230U

FreeStyle 120 LED DMX Controller, Univ 230U

BAG-FS10

FreeStyle Mini System Soft Case

CFX-F10 FreeStyle Mini LED Fixture

MTP-BG41S KinoGrip 41K Mount w/

Baby Receiver Short (16mm)

X08-F125 FreeStyle/1 Extension, 25ft

FreeStyle Mini LED Kit

Kit-F10BU

FreeStyle Mini LED Kit, Univ

FreeStyle Mini LED Kit consists of:

1 FreeStyle Mini Fixture

1 Mounting Plate

1 Extension Cable

1 LED Controller

1 Soft Case

FreeStyle T41/ T21 System Components

LED-120X-120U

FreeStyle 120 LED DMX Controller, Univ 120U

LED-120X-230U

FreeStyle 120 LED DMX Controller, Univ 230U

CFX-F481 FreeStyle T41 Fixture

CFX-F241 FreeStyle T21 Fixture

MTP-KG41 KinoGrip 41K Mount w/ 3/8” Pin

(10mm)

X08-F125 FreeStyle/1 Extension, 25ft

FreeStyle T41/ T21 LED Systems

SYS-FT41U

FreeStyle T41 LED DMX System, Univ

SYS-FT21U

FreeStyle T21 LED DMX System, Univ

FreeStyle T41 or T21 LED System

consists of:

1 FreeStyle T41 or T21 Fixture

1 FreeStyle 4ft (or 2ft) LED Tube

1 Mounting Plate

1 Extension Cable

1 LED Controller

FS-48 FreeStyle 4ft LED Tube

FS-24 FreeStyle 2ft LED Tube

Power

DC Input

The FreeStyle 120 LED DMX can also

be operated on 24VDC (input range

18-36VDC) through a 3-Pin XLR.

The pin polarity is:

Pin # 1 – Ground

Pin # 2 + 18-36VDC

Pin # 3 not used

AC Input

The FreeStyle 120 LED DMX

Controller is powered AC and includes

an IEC connection. It also includes a

12ft power cord with a locking IEC

connector.

The FreeStyle 120 LED DMX has a

built-in power supply with universal

input from 100-240VAC.

Ambient Operating Temperature

The FreeStyle 120 LED DMX is designed

to operate at temperatures from

14°F to 104°F (-10°C to 40°C).

Note:

A low voltage warning will display

if input DC voltage is under 18VDC.

Photo example: LOW VDC: 16

FreeStyle Mini Fixture Assembly

FreeStyle T41/ T21 Fixture Assembly

The FreeStyle T41/ T21 ixtures are

comprised of a Louver and Relector.

The Louver and Relector are held in

place with Velcro fasteners.

The FreeStyle Mini is comprised of an

LED Panel and Louver. The Louver is

held in place with Velcro Fasteners.

The FreeStyle Relector has a

unique design to accommodate

the aluminum channel on the back

of the FreeStyle tube. It provides

even light distribution and maximizes

light output. In addition, it acts as

a heatsink and allows the FreeStyle

Tubes to run cooler.

Insert tube into the ixture’s tube

holder clips. The tube can operate

remotely from the ixture allowing

them to be built into sets or custom

soft boxes or handheld as a single

tube for an eye-light.

The FreeStyle T41, T21 and Mini LED ixtures

can operate remotely from the controller with

extension cable up to 50ft (2 x 25ft).

X08-F125 FreeStyle/1 Extension, 25ft

FreeStyle T41/T21

The extension cable connects directly to the

LED tube. Align arrows on extension cable

connector with tube. Push and click into place.

To remove, turn locking ring to the left and

pull.

FreeStyle Mini/LED 120X Controller

To connect the extension cable to the

FreeStyle Mini or LED 120X controller, align

arrows on extension cable with connector.

Push and click into place. To remove,

turn locking ring to the left and pull.

Extension Cable

Mounting Controller

The Controller can be mounted to a

stand with a ballast mount accessory,

MTP-BAL1 and mafer clamp.

MTP-BAL1

Mounting the Fixture

The FreeStyle xtures have a universal mount.

The ball and socket mount allows the xture to be

oriented in a broad range of angles.

Align the center pin of the mounting plate to the

center hole on the mating plate.

Rotate plate clockwise until the four shoulder rivets

drop into the receptacle. A locking pin will snap into

place when the plate is properly seated.

The yellow wire loops (FreeStyle T41/21) provide

attachment points for a safety chain.

To remove the plate, pull up on the locking pin and

reverse the mounting procedure.

Lollipops are interchangeable.

MTP-L Kino 41 Lollipop w/ 3/8” Pin (10mm)

MTP-LBC Kino 41 Lollipop w/ Baby Receiver Curve

(16mm)

MTP-LBS Kino 41 Lollipop w/ Baby Receiver Short

(16mm)

Turn the knob to loosen or tighten the mount.

Applying Louver

The Louver is fastened to the FreeStyle T41/T21 ixture with 4 Velcro straps.

The FreeStyle Mini Louver is also fastened to the ixture with

4 Velcro Straps.

Mounting LED Tubes

FreeStyle LED Tubes can operate inside the ixture or independently with only

the wiring harness. The LED Tubes have an aluminum rail that can be used as

an access point for mounting accessories:

MTP-F100 FreeStyle Tube Mount – Anchor

MTP-F101 FreeStyle Tube Mount – Baby Pin

MTP-F102 FreeStyle Tube Mount – Wall Plate

MTP-F103 FreeStyle Tube Mount – Hanging Kit 4pk (Wire not included)

MTP-F103W FreeStyle Tube Mount – Hanging Wire, 50ft

MTP-F200 FreeStyle Tube -Ball Mount

MTP-F201 FreeStyle Tube - Floor Stand

Insert into T-slot. Insert wire all the way down. Pull up wire until it latches.

Press down pin to release wire.

MTP-F100

MTP-F103 MTP-F103W

MTP-F101 MTP-F102

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kino Flo Équipement d'éclairage

Kino Flo

Kino Flo Tegra 4Bank Universal Manuel utilisateur

Kino Flo

Kino Flo DIV-L20X-120U Manuel utilisateur

Kino Flo

Kino Flo Tegra 4Bank Universal Manuel utilisateur

Kino Flo

Kino Flo Mini-Flo KIT- 239X-12 Manuel utilisateur

Kino Flo

Kino Flo Diva-Lite 400 Universal Manuel utilisateur

Kino Flo

Kino Flo Image L80 LED Manuel utilisateur

Kino Flo

Kino Flo Diva-Lite 200 Manuel d'installation

Kino Flo

Kino Flo Diva-Lite 401 Manuel utilisateur

Kino Flo

Kino Flo ParaBeam 400 Series Manuel utilisateur

Kino Flo

Kino Flo Single Manuel utilisateur

Kino Flo

Kino Flo Freestyle 41 LED Manuel utilisateur

Kino Flo

Kino Flo ParaZip 415 DMX Manuel utilisateur

Kino Flo

Kino Flo Celeb 850 Manuel utilisateur

Kino Flo

Kino Flo ParaBeam 410 DMX Manuel utilisateur

Kino Flo

Kino Flo Bag-O-Light Manuel utilisateur

Kino Flo

Kino Flo Mini-Flo Manuel utilisateur

Kino Flo

Kino Flo Flathead 80 Manuel utilisateur

Kino Flo

Kino Flo FreeStyle T42 LED Manuel utilisateur

Kino Flo

Kino Flo Celeb 401 DMX LED Manuel utilisateur

Kino Flo

Kino Flo Select DMX 4Bank Manuel utilisateur

Kino Flo

Kino Flo VistaBeam 600 Manuel utilisateur

Kino Flo

Kino Flo Diva-Lite 30 Manuel utilisateur

Kino Flo

Kino Flo Freestyle 41 LED Manuel utilisateur

Kino Flo

Kino Flo Celeb 401Q DMX LED Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur