Kinivo BTH360-S Manuel utilisateur
BTH360-S Bluetooth Stereo Headset
User Manual
© 2012 Kinivo LLC. All rights reserved.
Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo
are registered trademarks of Bluetooth SIG. All other trade names are registered
trademarks of respective manufacturers. This manual may not be copied in any
media or form without the written consent of Kinivo LLC.
Kinivo Product Support
Online : http://support.kinivo.com
Email : support@kinivo.com
Kinivo BTH360-S Bluetooth Stereo Headset
2
Table of Contents
About BTH360-S...................................................................................... 3
Overview (Before Use) ............................................................................ 3
Charging the headset ............................................................................. 4
First time charging ........................................................................................................4
Low battery......................................................................................................................4
Charge the headphones using the USB cable.....................................................4
Warning.............................................................................................................................5
Using the headset ................................................................................... 6
1. Turning the headset on/o....................................................................................6
2. Pairing headset with Bluetooth devices ...........................................................6
3. Reconnecting the headset with devices...........................................................8
4. Wearing the headset................................................................................................8
5. Making calls.................................................................................................................9
6. Playing music........................................................................................................... 11
7. LED indicator............................................................................................................ 13
8. Indication tone........................................................................................................ 14
Care and maintenance.......................................................................... 14
FAQs .......................................................................................................15
Specications ........................................................................................17
Warranty ................................................................................................18
Online Support / Contact Us.................................................................19
3
Kinivo BTH360-S Bluetooth Stereo Headset
About BTH360-S
The BTH360-S oers the convenience of bluetooth connectivity and a
rechargeable battery without the hassle of wires.
Overview (Before Use)
1) Status indicator light
2) Charging jack
3) Right speaker
4) Left speaker
5) Built-in microphone
6) Volume up/ next song
7) Multifunction button (MFB)
8) Volume down/ previous song
1
Fig. 1
R
L2
5
6
7
8
4
3
R
L
Kinivo BTH360-S Bluetooth Stereo Headset
4
Charging the headset
First time charging
Before you rst use your BTH360-S Bluetooth headset, please charge the
battery fully.
Low battery
Low battery power is indicated by three “DONG” tones repeated every 30
seconds and the Red LED status indicator light blinking twice in a row.
Charge the headphones using the USB cable
The charging ports on BTH360-S are designed to prevent water / sweat
from entering the headphones. Please use the included cable to charge the
headphones from any USB charger.
Fig. 2
The available clip
should be slipped
and locked in over the
charging port.
5
Kinivo BTH360-S Bluetooth Stereo Headset
1. Plug USB cable into any computer USB port or USB charger.
2. Plug opposite end of USB cable into headset’s charging port
RED light on >> Charging
RED light o >> Finished charging
3. It will take about two hours to charge the headset fully.
Warning
The internal battery is recyclable.
Please contact your local electronics recycling program
for disposing the headphones in a safe and environment
friendly way.
Kinivo BTH360-S Bluetooth Stereo Headset
6
Using the headset
1. Turning the headset on/o
Note:
If the headset can not connect to any devices within 5 minutes of turning on, it
will shut o automatically to conserve battery life.
2. Pairing headset with Bluetooth devices
1) How to enter pairing mode
Function Operation Indicator light
Turn on Press multi-function button for about
3-5 seconds. Release when the blue light
blinks.
Blinking blue light.
Turn o Press multifunction button for about 3-5
seconds. Release when the red light blinks.
Blinking red light.
Function Operation Indicator light
Enter
pairing
mode
Make sure the headset is turned o. Press
multifunction button (MFB) for about 6-7
seconds. Release MFB when blue and red
lights blink alternately.
Blue and red lights
blink alternately.
7
Kinivo BTH360-S Bluetooth Stereo Headset
Note:
Pairing mode will last 2 minutes. If the headset can not connect to any other
devices within 2 minutes, it will automatically switch to standby mode with
blinking blue light.
2) Pairing with one device
Before you use your headset for the rst time, you will need to pair it with a
Bluetooth-enabled cell phone. Pairing procedure may vary depending on the
model of cell phone you use. Please refer to your cell phone user’s manual for
further information. The general pairing procedure is as follows:
1. Please keep the headset and mobile phone within one meter of each other
when pairing
2. Activate the headset’s pairing mode. (Please refer to “How to enter pairing
mode” above.)
3. Activate your mobile phone’s Bluetooth function and search Bluetooth
devices within available range. When the phone presents a list of devices
found, select “Kinivo BTH360-S” from the list.
4. When prompted by your cell phone to enter password or PIN, enter “0000”
and press the “Yes”or “Conrm” button to conrm.
5. After pairing successfully, choose “Kinivo BTH360-S” from the list of devices
shown.
6. After the headset is connected successfully its blue light blinks 2-3 times
every 4 seconds.
Kinivo BTH360-S Bluetooth Stereo Headset
8
Notes:
If the pairing is not successful, please turn o the headset, then re-pair
according to the steps 1-6 above.
After your headset and mobile phone are successfully paired, They will
remember each other so you will not need to re-pair next time. The headset
can remember 8 paired devices. When the number of paired devices
exceeds 8, the rst device that was paired will be replaced.
If you want to pair the headset with another device, please follow steps 1-6
above.
3. Reconnecting the headset with devices
Automatic reconnection
After headset is turned on, it will try to connect to the most recently
connected device.
Manual connection
If the headset does not connect to a device, please double-click the multifunction
button. The headset will try to connect the most recently connected devices.
4. Wearing the headset
Hang the headset on the ears with both hands, as shown in the illustrations
below. It is important to use both hands to put on or take o the headset; never
pull or push the headset while putting it on or taking it o.
9
Kinivo BTH360-S Bluetooth Stereo Headset
5. Making calls
Function Status of the
headset Operation
Cancel call Calling mode
Short press (press and
release) multifunction
button once
Answer call Ringing
Short press multifunction
button once Long press
(press and hold)
Reject call Ringing
Multifunction button
about 2 seconds. Release
when you hear a tone.
End call Conversation mode Short press multifunction
button once
After putting on the headset, rotate the earplug to get the
most comfortable angle.
Fig. 3
Kinivo BTH360-S Bluetooth Stereo Headset
10
Volume up Conversation mode Short press “+” button
Volume down Conversation mode Short press “-” button
Transfer call to Mobile
phone Conversation mode Long press multifunction
button for 2 seconds
Transfer call to
headset Conversation mode Long press multifunction
button for 2 seconds
Microphone mute Conversation mode Double-click multifunction
button
Cancel mute Conversation mode
(Microphone mute)
Double-click multifunction
button
Voice dial
Standby mode (already
connected with the
device you are using)
Long press multifunction
button for 2 seconds
Redial last number
Standby mode (already
connected with the
device you are using)
Double-click multifunction
button
Delete pairing list Turn o
Press multifunction button
and “+” button at the same
time for 8 seconds. Release
when the blue light and
red light are on at the
same time for 1.5 seconds.
Autres manuels pour BTH360-S
1
Table des matières
Autres manuels Kinivo casque
