Kingspan AquaBank Guide de l'utilisateur

AquaBank®

Instruction and safety manual

Instrukcja obsługi i bezpieczeństwa

VII 2020

ver. 1.00

1/64

AquaBank®

(EN) Instruction and safety manual (ORGINAL) ......................................... 3

(PL) Instrukcja obsługi i bezpieczeństwa ................................................. 31

3/64

AquaBank®

(EN) Instruction and safety manual

CONTENTS

1. Important information ....................................................................... 5

2. Introduction ........................................................................................ 5

3. Application ......................................................................................... 6

4. Legal requirements ............................................................................. 6

5. Technical specification ....................................................................... 7

6. Equipment .......................................................................................... 8

6.1. Vents ..................................................................................... 9

6.2. Inspection lid ........................................................................ 9

6.3. Outlet .................................................................................... 9

6.4. Ball valve ............................................................................. 10

6.5. Wind protection system ..................................................... 11

6.6. Liquid level measurement .................................................. 11

7. Acceptance and inspection .............................................................. 15

8. Erecting and moving ......................................................................... 15

9. Storage ............................................................................................. 19

10. Transport .......................................................................................... 20

11. Installation ........................................................................................ 20

11.1. Location requirements ....................................................... 21

11.2. Placement ........................................................................... 21

11.3. Wind protection .................................................................. 22

11.4. Connections ........................................................................ 24

12. Filling and emptying ......................................................................... 25

13. Maintenance .................................................................................... 26

14. Handling leaks .................................................................................. 28

15. Common problems and solutions .................................................... 28

16. Guarantee ......................................................................................... 29

17. Decommisioning ............................................................................... 30

18. Modification and replacement parts ............................................... 30

AquaBank® – Instruction and safety manual

5/64

1. IMPORTANT INFORMATION

This operating and safety manual contains important guidelines and

warnings. Read this manual carefully and follow all the guidelines contained

within.

This manual is intended for information purposes only and

should not be regarded as a source of law. Compliance with the

instructions does not provide exemption from the requirements

of local Health and Safety guidelines, as well as guidelines relating to fire

prevention and environmental protection. This tank is only for storing non-

potable water.

The manufacturer is not liable for any loss or damage caused by improper

use of the product and failure to comply with applicable regulations.

IMPORTANT! READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE.

The authors of this publication have taken every effort to ensure that the

information contained within is accurate. The manufacturer reserves the

right to change the specifications of the described products and the content

2. INTRODUCTION

This document constitutes the instructions for the use of a single-skinned

polyethylene rotationally moulded tank intended for the storage of non-

potable water.

Read the contents of this manual prior to first use. Also read the

contents of the other enclosed documents and follow the

guidelines contained in them. This will ensure correct use of the

tank and will ensure it is used safely. Moreover, these guidelines are part

of the warranty conditions. Failure to follow them may result in the loss

of warranty.

AquaBank® – Instruction and safety manual

6/64

3. APPLICATION

The AquaBank ® is intended solely for the stationary storage of non-potable

water.

ATTENTION! Storage of other substances, specifically oils,

diesel fuel, gasoline, and aggressive chemicals, is prohibited

and may lead to explosion of, or damage to, the tank and its

equipment. Furthermore, the tank is not suitable for storing drinking

water.

The AquaBank® is a non-pressurized tank intended for use ONLY IN THE

CONDITIONS OF ATMOSPHERIC PRESSURE. The tank must be properly

vented in order to prevent overpressure or underpressure during the filling

or emptying processes. If the tank is vented improperly or not vented at all,

it is at risk of being damaged.

The temperature of the stored water cannot exceed ambient

temperature. The tank may be filled with water with temperature up to

40°C as long as the water cools down to 23°C within 24 hours. Please

remember that water is subject to freezing in low temperatures and will

clog up the equipment, e.g. the valves (see chapter 6.4). When the water

returns to liquid state all devices should return to operating order.

The manufacturer is not responsible for damage and losses

caused by improper use of the tank or failure to obey the

regulations applicable to such products.

4. LEGAL REQUIREMENTS

Although the tank is intended solely for storing water, this does

not however mean that the user is exempt from compliance

with regulations relating to, for example, Health and Safety and

the site and use of the tanks.

AquaBank® – Instruction and safety manual

7/64

5. TECHNICAL SPECIFICATION

The AquaBank® is a single skin vertical cylindrical tank. It is produced from

high-quality polyethylene using the rotational moulding process.

The tank is available in five capacity versions: 15, 20, 22, 26, and 28 m3, the

general dimensions1 and weights of which are presented in the table below.

The table below also includes a column specifying the minimum

lifting capacity required to unload and erect an empty tank.

Also listed is the weight of the full tank.

ATTENTION! Full or partially full tanks cannot be lifted or

transported.

Nominal

volume

[m3]

Dimensions*

D × H

[m]

Min. lifting

capacity

[t]

Estimated

weight of full

tank

[t]

15  2,95 × 2,75 0,3 16.5

20  2,48 × 4,59 0,8 21.5

22  2,48 × 4,99 0,9 23.5

26  2,48 × 5,79 1,1 27.5

28  2,48 × 6,19 1,3 29.5

* not including piping

1 All dimensions are approximate. The dimensions may vary due to manufacturing process

variations and/or environmental conditions.

AquaBank® – Instruction and safety manual

8/64

The detailed technical specification for

the AquaBank® depends on what version

of the tank is ordered. One product

specification example is presented

below.

Single skin tank with bottom outlet:

1. polyethylene tank,

2. vents,

3. 8” inspection lid,

4. 22” inspection lid,

5. lifting and fixing points (4 points),

6. outlet fitted with 2” or 3” ball valve.

6. EQUIPMENT

The original manufacturer’s instructions covering the various

equipment items included with the product are included with

the tank documentation. Please read them carefully in order to

learn more about the equipment, because this document only provides

a review. Appearance of specific elements depends on the technical

specification of the tank and may differ from what is shown. The images of

accessories are for reference purposes only and may not reflect their actual

appearance.

Table des matières

Langues :

Autres manuels Kingspan Chauffe-eau

Kingspan

Kingspan Tribune Xe Manuel utilisateur

Kingspan

Kingspan AUXD120 Manuel utilisateur

Kingspan

Kingspan Range Tribune HE Series Instructions d'installation et d'utilisation

Kingspan

Kingspan Tribune Mode d’emploi

Kingspan

Kingspan Tribune HE Range Instructions d'installation et d'utilisation

Kingspan

Kingspan RHINO RT-25 Manuel utilisateur

Kingspan

Kingspan Tribune HE Range Manuel utilisateur

Manuels Chauffe-eau populaires d'autres marques

Kenmore

Kenmore 153.582400 Manuel utilisateur

Applimo

Applimo Edel AIR Manuel utilisateur

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Manuel utilisateur

clage

clage E-Mini Series Manuel utilisateur

Toyotomi

Toyotomi Oil Miser OM-180 Manuel utilisateur

Bradford White

Bradford White EF Series Manuel utilisateur

Eccotemp

Eccotemp 40-H Manuel utilisateur

Dimplex

Dimplex ECSd125-580 Mode d’emploi

Dux

Dux 32FCR6N Manuel utilisateur

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Guide de dépannage

Noritz

Noritz N-132M Manuel d'instructions

TESY

TESY GCV7/4S 10047 Fiche technique

A.O. Smith

A.O. Smith Gphe 50 Manuel utilisateur

Koryo

Koryo KWHZF15Y Manuel utilisateur

Pentair

Pentair PSC-14-4-02 Manuel utilisateur

GE 40M06AAG Instructions de montage

Thermor

Thermor AEROMAX SPLIT 2 Manuel utilisateur

American Hometec

American Hometec AHQ-B03X Manuel utilisateur