Kingloc KLC310 Manuel utilisateur
KLC Series
KLC310
1 Door Slimline Upright Display
Fridge
User Manual
Read this manual carefully before you operate the machine.
Please keep this manual for future reference.
Version 3.1 _March 2017 Page | 2
TABLE OF CONTENTS
.....................................................................................
1. Foreword 3
2. Models and Cabinet Specifications 4
2.1 KLC310 Cabinet Specifications- 5
3. Technical Descriptions 6
4. Installation of the Unit 7
4.1 Choosing the Installation Spot - 7
4.2 Preparing the Unit for Operation - 8
4.2.1 Installing Rear Spacer - 8
4.2.2 Levelling the unit - 8
4.2.3 Connection to the Main Supply - 9
4.3 Tips for proper Operation - 9
5. Maintenance of the Unit 10
5.1 Cleaning the unit - 10
5.2 Cleaning of the Condenser - 11
5.3 General Use Information - 11
6. Service of the Unit 12
6.1 General Faults and Trouble-Shooting: 12
7. First Aid 14
8. Warranty 14
9. Recycling Information 14
10. The Light Switch 15
11. Your Service Provider 15
Version 3.1 _March 2017 Page | 3
1. Foreword
Dear Customer,
Congratulations on purchasing this unit from Kingloc Commercial Equipment.
Before using your unit please read these instructions carefully.
Please follow the Operation Manual to achieve the best service performance and
the longest service life for this appliance
Please see below symbols used in this manual for your reference.
Warning
Information
Version 3.1 _March 2017 Page | 4
2. Models and Cabinet Specifications
This User Manual is applicable to the below Kingloc KLC Series. The model code is
used to distinguish between different models.
Model Description
KLC310 1 Door Slimline Upright Display Fridge
Version 3.1 _March 2017 Page | 5
2.1 KLC310 Cabinet Specifications-
Dimensions
Height 2155mm
Width 440mm
Depth 695mm
Weight 85kg
Capacity (L) 310L
Power (V/Hz) 220-240/50
Input Power (W) 332W
Energy Consumption 4.14kwh/24hr
Working Temp. (◦C) 0-10◦C
Doors 1
Shelves 5
Shelf Mechanism Clips - 20
Max Weight / Shelf 20kg
Light Type 3x LED’s
Header LED 1x 3W
Internal LED 2x 10W
Rated Current 2.0A
Refrigerant R134A
Removable Lightbox Yes*
Notes
* Removable
Lightbox only
available on some
KLC Series Models.
Version 3.1 _March 2017 Page | 6
3. Technical Descriptions
3.1 General -
The unit must be connected to an earthed mains outlet with a fuse rating of a
minimum 10A. The outlet must be easily accessible, for the purposes of installation
and servicing.
3.2 Climate Condition -
The class climate specification of the KLC is 3M1 50HZ. We recommend you put this
unit in a cool place as it will use less power and last longer.
3.3 Technical Specifications -
Rating Voltage: 220-240 / 50Hz
Climate Class: 3
M-Package Temp: Class M1
Defrosting Type: Manual
3.4 Physical Dimensions -
Model Height Width Depth Weight Capacity
KLC310 2115mm 440mm 695mm 85kg 310L
*Excludes 75mm Spacer and 25mm Handle
Version 3.1 _March 2017 Page | 7
4. Installation of the Unit
Improper levelling may result in cabinet deformation and reduced cooling
performance.
4.1 Choosing the Installation Spot -
The KLC Models are intended for indoor use only.
Performance of these Models is highly influenced by the environmental conditions
in which they are in use. To maximise the performance of the KLC Models the
following is recommended:
The unit is not to be placed near any kind of heat source.
The unit is not to be placed near or inside air streams produced by
ventilation fans, open doors and/or windows.
The unit is not to be situated under a roof mounted ventilation system.
The units should have sufficient space to “breathe”. Always keep at least a
75mm gap around the back, top and sides of the cabinet. (Always use the
rear spacer to ensure minimum clearance).
The unit is not to be placed under direct sunlight.
Keep clear of obstruction all ventilation openings in the appliance enclosure
or in the structure for building-in.
In order to reduce flammability hazards the installation of this appliance
must be carried out by a suitably qualified person.
Version 3.1 _March 2017 Page | 8
The appliance should be located on smooth flat surface during operation.
Check rollers / castors / adjustable feet below the appliance against damages
to ensure stability. Take necessary precautions if tilting is needed during
installation.
Unauthorised persons are not allowed near the appliance until installation is
completed.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Not following the instructions may cause high-energy consumption and poor
performance.
4.2 Preparing the Unit for Operation -
The subsequent steps needs to be followed prior to starting this unit, the set up
time should not take more than 5 minutes.
4.2.1 Installing Rear Spacer -
To ensure proper ventilation, the unit is fitted with a rear spacer that will provide
the appropriate clearance of 75 mm at the back of the unit. The rear spacer is
supplied with the unit and should not be removed.
4.2.2 Levelling the unit -
A spirit level should be used to ensure the unit is levelled in both directions. The
spirit level can be placed on one of the shelves.
A properly levelled unit will avoid possible ice formation on the evaporator’s fins
due to insufficient drainage of the condensate.
Version 3.1 _March 2017 Page | 9
4.2.3 Connection to the Main Supply -
Connect the appliance to a 220-240 Volt, 50Hz Power Supply on a min 10A fused
and earthed plug. Do not use extension cables or power boards. In the case the
power cord is not long enough, either install a new socket nearby or ask an
authorised electrician to replace the cord with a longer one.
The unit is now ready to operate.
4.3 Tips for proper Operation -
In order to enjoy long and proper operation of the unit, as well as for your safety,
follow these simple tips.
If the cabinet has been excessively tilted during delivery or installation, allow
3 hours in stand in the upright position before operation. This will allow the
compressor lubricant to return to the oil sink.
Never connect the unit in a multiple socket outlet or power board.
Never block the condenser fins and front grid openings (for airflow). Any
products or items placed in a way that blocks airflow will drastically reduce
the performance of the unit.
Do not load beyond load limit indicated inside the appliance.
Avoid repositioning the unit when loaded with products.
Never reposition a Shelf when loaded with products.
Always unplug the unit prior to any cleaning or general maintenance task.
If you observe something unusual (excessive noise, smoke, etc.) unplug the
unit immediately and call the Service Provider.
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
This unit contains live components. Service tasks should be carried out by
qualified personnel only.
Version 3.1 _March 2017 Page | 10
5. Maintenance of the Unit
This section of the manual includes some simple instructions that will ensure
proper operation and appearance of the unit.
5.1 Cleaning the unit -
For cleaning the unit’s external plastic parts, use a light solution of soap and water.
Do not apply hard chemical detergents on the plastics as they may lose their
brightness or even become deformed.
This also applies for the internal metallic surfaces. The use of hard chemicals could
harm the painting of the metallic surfaces thus affecting the sanitary protection of
the unit.
BEFORE PROCEEDING IN ANY CLEANING OR MAINTENANCE PROCEDURE
PLEASE UNPLUG THE COOLER.
Ce manuel convient aux modèles suivants
5
Table des matières
