King Radios RDPR-HP-1 Manuel utilisateur
CONTENTS
Introduction........................................................................................2
Parts Included ................................................................................2
Basic Conguration...........................................................................3
Available Options ...........................................................................3
Available Accessories ....................................................................4
Available Cable Assemblies...........................................................4
Available Mounting Kits..................................................................4
Controls and Connections................................................................5
LED Indicators................................................................................6
Switches.........................................................................................6
Basic Operation .................................................................................7
Mobile Extender .................................................................................7
Linking ................................................................................................8
SINCGARS..........................................................................................8
Antenna Installation...........................................................................9
Duplexer Option ...........................................................................10
Duplexer Switch Option................................................................10
Mode Settings .................................................................................. 11
Service ..............................................................................................12
Quick Reference...............................................................................13
Basic Conguration......................................................................13
External Radio Conguration.......................................................14
In-Band Linking Conguration .....................................................15
Cross-Band Linking Conguration ...............................................16
Power Supply Conguration.........................................................17
Schematic ....................................................................................18
2RDPR-HP-1 User’s Manual
INTRODUCTION
This manual contains information concerning the operation procedures
for the BK Radio Rapid Deployment Portable Repeater (RDPR). The
RDPR-HP-1 has been designed to meet the tough requirements of today’s
communications environment. The portability and ease of use allows it
to be easily deployed in the most demanding environments. Please take
a moment to read the information in this manual so you can get optimum
performance from your new Portable Repeater. Also, please refer to
the Owner’s Manual of the respective radios that are congured in your
portable repeater for safety and operation information.
PART INCLUDED
CABAUTO12VRDPR-HP Cigarette Lighter Power Supply Cable
3
RELM/BK Radio
RADIO
PORT 1
VOX / COR
RADIO 1 PWR
OFF OFFOFF
POWER
RADIO 2
RADIO 2 PWR
VOX / COR
RADIO 2
PORT 2
RADIO
RF 2
INPUT
ON
REPEATER
ON
POWER
REPEAT 2
REPEAT 1
EXTERNAL
RADIO 1
INPUT
RF 1
RADIO 2 RADIO 1
OFF ON
DUPLEXER
Interface
Connector*
Radio Set Mounting Plate*
Mounting Nut
*Interface connectors and mounting plates are dependant radio set type.
Contact RELM Wireless for available radio types.
Weather Proof Case
Radio Sets*
BASIC CONFIGURATION
AVAILABLE OPTIONS
LZA3015-A6 Factory Installed Duplexer 136-148MHz
LZA3015-B6 Factory Installed Duplexer 148-160MHz
LZA3015-C6 Factory Installed Duplexer 160-174MHz
LZA3017-A6 Factory Installed Duplexer 380-400MHz
LZA3017-B6 Factory Installed Duplexer 440-480MHz
LZA3017-C6 Factory Installed Duplexer 480-512MHz
4RDPR-HP-1 User’s Manual
LZA3017-D6 Factory Installed Duplexer 406-440MHz
LZA0151 Factory Installed Power Amp, 136-174MHz
LZA0152 Factory Installed Power Amp, 400-512MHz
LZA0155 Factory Installed Duplexer 806-960MHz
LZA3050 Duplexer Switch, Factory Installed
AVAILABLE ACCESSORIES
WPSRDPR-HP Wall Unit Power Supply 14Vdc, 10A
BS4MRDPR Heavy Duty Tripod, Bluesky
USAT-1 Tripod, Aluminum, 6FT
EBS-RDPR External Battery System, 40AH, Lithium Ion
MBS Mounting Base, Antenna
MBS-NTYPE Mounting Base, Antenna, N-Type
MWV1360S Mobile Antenna, 136-174MHz, w/Spring
MWU4002S Mobile Antenna, 406-512MHz, w/Spring
AVAILABLE CABLE ASSEMBLIES
CABANTRDPR 25FT Antenna Coax Cable
CABANTRDPR50 50FT Antenna Coax Cable, N to UHF
CABANTRDPR50N 50FT Antenna Coax Cable, N to N
MECRDPR2 Mobile Extender Cable, Metal Conn.
LINKCRDPR2 Mobile Extender/Link Cable
PWRCBLHP Power Cable, EBS-RDPR to RDPR-HP
AVAILABLE MOUNTING KITS
RIKKNG For KNG-P Radios (Left or Right)
RIKKNG-2 For KNG-P Radios (Left & Right)
RIKDPH For DPH/GPH Radios (Left & Right)
RIKRP3 For RP3000 Series Radios (Left & Right)
RIKRP7 For RP7000 Series Radios (Left & Right)
RIKXTS For MOT(XTS)/EFJ Radios (Left & Right)
RIKXTS2500 For MOT(XTS2500) Radios (Left & Right)
5
RELM/BK Radio
CONTROLS AND CONNECTIONS
RADIO 2
MOBILE
VOX / COR VOX / COR
ONON
OFF OFF
POWER
REPEATER
POWER
REPEAT 2
REPEAT 1
DUPLEXER
ON
OFF
RADIO 1
EXTERNAL
RADIO 2
LED Indicators Switches
DETAIL A
RADIO
PORT 1
VOX / COR
RADIO 1 PWR
OFF OFFOFF
POWER
RADIO 2
RADIO 2 PWR
VOX / COR
RADIO 2
PORT 2
RADIO
RF 2
INPUT
ON
REPEATER
ON
POWER
REPEAT 2
REPEAT 1
EXTERNAL
RADIO 1
INPUT
RF 1
RADIO 2 RADIO 1
OFF ON
DUPLEXER
Radio 2 Power Radio 1 Power
Antenna Port 2/Duplexer Port
Mobile Extender/Link Port SW6 Access
Antenna Port 1
Radio 2 Port
Radio 1 Port
Radio RF Ports
DC Supply Port
LED and Switch Array
See Detail A
6RDPR-HP-1 User’s Manual
LED INDICATORS
Power
With Detect On (Refer to the Mode Settings, page 11)
Solid - Ready for operation.
Blinking - Not ready for operation.
With Detect OFF (Refer to the Mode Settings, page 11)
Solid - Master Power switch is on.
Repeat 1 When lit, Radio 2 (left side) is repeating the received
signal from Radio 1 (right side).
Repeat 2 When lit, Radio 1 (right side) is repeating the
received signal from Radio 2 (left side).
Repeat 1
and
Repeat 2
When lit, Radio 1 and Radio 2 are repeating the
received signal from the radio connected to the
external port. (If congured “Cross-Band Linked
Repeater”, page 12)
SWITCHES
Power Master switch to power-up the RDPR-HP-1.
Repeater Switches power to the “Radio 1 PWR” and “Radio 2
PWR” ports to enable/disable repeater function.
Radio 2/Mobile Switches Radio 2 off when using the external radio
port.
VOX/COR
Switches between voice/noise activated (VOX) or
carrier activated (COR) repeat function.
NOTE: BK Radio portables must be set for VOX
operation.
Duplexer
(REQUIRES LZA3050)
Activates and deactivates the duplexer.
Refer to Duplexer Switch Option on page 10.
SW6 Refer to the Mode Settings on page 11.
7
RELM/BK Radio
BASIC OPERATION
If needed, program the installed radio sets. The “Power”, “Repeater”,
and “Radio 2” switches should be on to supply power to the radio sets
being programmed.
See the specic radio’s programming manual for programming details.
Switch the “Power”, “Repeater”, and “Radio 2” switch to the “ON” 1.
position.
Adjust the squelch on receiving radios for desired signal level.2.
Adjust the volume control knob of the receiving radio to the 10 o’clock3.
– 11 o’clock position. This will set the VOX sensitivity as well the
transmit deviation level. Do not set volume knob past the 12 o’clock
position. Use a service monitor or compatible transmitter and receiver
to test the repeat function.
MOBILE EXTENDER (MECRDPR2)
The Mobile Extender Cable (MECRDPR2) allows the use of a BK Radio
mobile as the transmitting unit to take advantage of the mobile radio’s
higher RF power output.
Connect the modular plug1.
of the MECRDPR2 into the
mobile radio’s microphone jack.
Connect the other end to the2.
Mobile Extender/Link Port of
the RDPR-HP-1.
Switch the RDPR-HP-1 and3.
mobile radio power on.
If the primary transmitting radio4.
within the RDPR-HP-1 (Radio
2) is not needed, set the “Radio
2” switch to the “OFF” position.
RDPR-HP-1
Mobile Radio
MECRDPR2
Mobile Extender/Link Port
Microphone Jack
Radio
Power
Supply
8RDPR-HP-1 User’s Manual
LINKING (LINKCRDPR2)
The RDPR-HP-1 can be used for Linking using the LINKCRDPR2 cable
with a BK mobile or GBH/DBH base station.
When a valid receive signal is received on the primary receiver (Radio 1),
the primary transmitter (Radio 2) and the mobile/base station will transmit
the received audio.
When a valid receive signal is received on the mobile/base station, the
primary transmitter (Radio 2) will be transmitting the received signal.
Connect the DB15 connector1.
of the MECRDPR2 into the
accessory port at the rear of
the mobile or base station and
connect the other end to the
Mobile Extender/Link Port of
the RDPR-HP-1.
Switch the RDPR-HP-1 main2.
power and repeater power on.
Switch the mobile or base3.
station power on.
Refer to the Mode Settings (page
12) for linking options.
SINCGARS (SINCGARS_LINK2)
The SINCGARS Link Cable (SINCGARS_LINK2) is used to connect
RDPR-HP-1 to SINCGARS radios.
Please refer to Mobile Extender and
Linking sections on page 9 for further
instructions.
RDPR-HP-1
Mobile Radio
LINKCRDPR2
Mobile Extender/Link Port
Accessory Jack Radio
Power
Supply
RDPR-HP-1
SINCGARS Radio
SINCGARS_LINK2
Mobile Extender/Link Port
Radio
Power
Supply
9
RELM/BK Radio
ANTENNA INSTALLATION (MWV1360S)
CAUTION
Make sure there are no overhead•
power lines that can potentially come
in contact with the antenna.
Loosen tripod pole lock and fully extend the legs of the tripod.1.
Position the Antenna Base (MBS)2.
with the two hose clamps at the
top of the tripod or Antenna Mast.
Make sure that the RF connector
is positioned away from the pole or
mast.
Tighten the hose clamps.3.
Insert the 4 radials into the holes4.
located on the antenna base. Using
the supplied hex wrench, tighten
the set screw for each radial.
Screw the antenna to the top of5.
antenna mount.
Connect the PL259 connector of the coax cable to the bottom6.
connector of the antenna base.
Connect the “N” connector to the appropriate RDPR-HP-1 7.
Antenna Port.
Antenna Mount
MBS
Antenna Base
Tripod or
Antenna Mast
Table des matières
