8
6. D-WDR Digital WDR)
When there are both bright and dark areas at the
same time, this mode makes both areas distinctive.
▶ Off : Deactivates the WDR function
▶ Indoor : Digital WDR suitable for indoor.
▶ Outdoor : Digital WDR suitable for Outdoor.
3) WHITE BALANCE
The screen color can be adjusted by using the white
balance function.
① Please position the arrow to point to 'WHITE BAL'
on the Setup menu by using the up and down
buttons
② Please select the mode you wish to operate by
pressing the Left or right button.
▶▶▶▶
ATW-L: Select this when the image is exposed
according to strong light and irregular illuminance in
environment of installed area.
▶▶▶▶
ATW : Select this when the color temperature is between 2,000°K and 20,000°K
▶▶▶▶
AWB : Select this when the color temperature is between 2,500°K and 9,500°K
▶▶▶▶
AWC→→→→SET : To find the optimal setting for the current luminance environment
in this mode, set the point the camera towards a sheet of white paper
and press the SET button. If the environment changes, read just it.
▶▶▶▶
MANUAL : Select this to fine-tune White
Balance manually. Set White Balance first
by using the ATW or AWB mode. After that
switch to MANUAL mode, fine-tune the White
Balance and then press the SET button.
▶▶▶▶
INDOOR : Fixed setting, adjusting white balance by 3,200°K.
▶▶▶▶
OUTDOOR : Fixed setting, adjusting white balance by 6,300°K.
▶▶▶▶BLUE IIIIIIIIIIIIIIIIIIIII 5
RED IIIIIIIIIIIIIIIIIIIII 13
RETURN RET↙↙↙↙
SHUTTER /60
BRIGHTNESS ---
AGC LOW
SENSE-UP AUTO↙
BLC OFF
▶▶▶▶D-WDR OFF
RETURN RET↙
. LENS DC↙
2. EXPOSURE ↙
▶▶▶▶3. WHITE BAL ATW-L
4. DAY NIGHT EXT
5. 3DNR ON↙
6. SPECIAL ↙
7. ADJUST ↙
8. RESET ↙
