KIDSMILL UP! Manuel utilisateur
Highchair Up! - User manual AUS/NZ
INDEX
Congratulations
Warnings/Safety measures/Maintenance
Parts
Installation
Adjusting Safety Harness
Disassembly safety harness/further use of the highchair
Use
Warranty
3
3
4
5
7
8
9
10
IMPORTANT! RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE AND READ CAREFULLY
CONGRATULATIONS
Congratulations on the purchase of this Kidsmill Up! Highchair. This product
meets the most stringent safety requirements and is approved according to
the Australian Standard AS 4684:2009. Using this highchair can only be safe
when used according to these instructions. Please read this instruction manual
carefully and store it for future reference. The safety of your child may be
aected if these instructions are not followed.
WARNINGS
WARNING – Follow the manufacturer's instructions.
WARNING – Do not leave your child unattended.
WARNING – The harness must always be used and correctly tted - most injuries
from high chairs are caused by falls.
WARNING – Position the high chair away from solid structures and benches to
avoid injuries caused by falls and by acces to dangerous items.
SAFETY MEASURES
• Do not use the highchair if any part is broken, torn or missing.
• Check the high chair regularly to make sure that the chair is safe and
functioning according to these instructions.
• Be aware of the risk of open res and other sources of strong heat, such as
electric bar res, gas res, etc. in the near vicinity of the highchair.
• Do not use the highchair until the child can sit up unaided.
• Use the highchair on a at, even and horizontal oor and do not elevate the
high chair on any structure or table.
• The high chair should be used in an upright position once the child is capable
of reliably and consistently sitting upright.
• Apply wheel locks when not moving the high chair.
• The high chair can be used up to a maximum weight of 60 kg.
MAINTENANCE
• We recommend cleaning this highchair using a damp cloth. Wipe away the
excess water with a dry cloth immediately.
• Never use aggressive or abrasive cleaning agents because these can aect the
chair or and can also be detrimental to the health of your child.
• Ensure all locking devices work correctly and check the locks and ttings
regularly.
KIDSMILL HIGHCHAIR UP!
PARTS
3.
1.
5.
7.
8.
2.
4.
6.
14.
9.
13.
8.
7.
11.
10.
12.
15.
16.
1. Nut M5 (4x)
2. Screw M5x45 (10x)
3. Nut M5 (4x)
4. Dowel (4x)
5. Hex Key 4
6. Screw M6x16 (8x)
7. Extender Wheel (2x)
8. Glider Boot (2x)
Tools needed
INSTALLATION
Step 1: Fix the connection bars (9+10), backrest(13), safety and the metal tension rod(11) on the chair
leg(7). Attention! Tighten all screws by hand.
Step 2: Fix the second chair
leg(8).
Attention! Tighten all screws
by hand.
2. (5x)
1. (2x)
3. (2x)
4. (2x)
2. (5x)
1. (2x)
3. (2x)
4. (2x)
1
2
INSTALLATION
Step 3: Slide the seat(15) and the footrest(14) into
the grooves at the desired height. To mount the
safety bar between the legs, pull the legs outwardly.
Step 4: Place the seat(15) with the curved
corners against the legs.
Step 5: Screw(6) the extender wheels(7) under the rear legs
and the glider boots(8) at the bottom of the front legs. Not
too tight!
Step 6: Place the chair on a at surface and
tighten all screws in the correct order.
6
1
2
3
4
6
7
11
10
5
9
6. (8x) 7. (2x) 8. (2x)
5
4
3
ADJUSTING SAFETY HARNESS
21
4
'CLICK'
3
Step 3: Adjust the size of the safety
harness to the size that ts for your
child.
Step 4: Push the buckle parts to
release the safety harness.
Step 1: Remove the seat(15) by loosening the metal tension
bar(11).
Step 3: Remove the screws by using the screwdriver.
DISASSEMBLY SAFETY HARNESS/FURTHER USE OF THE HIGHCHAIR
1
2
3
Step 2: Turn around the seat(15).
Step 4: Pull the crotch strap away from the seat(15). Step 5: Remove the D-ring from the crotch strap and now
you are able to remove the crotch strap from the seat(15).
DISASSEMBLY SAFETY HARNESS/FURTHER USE OF THE HIGHCHAIR
4 5
Step 1: Adjusting the seat(15) and
footrest(14) can be done by the
loosening and tightening of the metal
tension bar(11).
1
USE
WARRANTY
Validity: 2 years from date of purchase.
The warranty is only valid in conjunction with proof of purchase. The warranty covers
the replacement of the entire product or parts when there a manufacturing defect. After
the expiration of the warranty there are costs attached to any repairs. The supplier takes
no responsibility for any damage or injury to persons, animals and belongings due to
misuse of the harness or by failure to follow the accompanying instructions.
Exclusion
All rights in respect of the guarantee and the responsibility of the supplier shall lapse if
the product:
• Is dismantled by unauthorized persons;
• Is not properly used or stored.
Furthermore, all external damage to the product that does not aect the proper
functioning is excluded from the warranty.
Autres manuels pour UP!
3
Table des matières
Autres manuels KIDSMILL chaise haute
