Kguard PLM00 Manuel d'installation et d'exploitation
WiFi IP Camera
PLM00
Web Client Manual
Default user name: admin
Default password: 123456
2
PLM00 User’s Manual
Set Up Your Camera Wirelessly Through Your Mobile Devices.................................5
Congure the IP Camera Using the KViewLink App .................................................6
Congure the IP Camera Using the Web Client........................................................6
Log In .....................................................................................................................7
Live Screen.............................................................................................................. 8
Task Bar .................................................................................................................. 8
Screen Mode .......................................................................................................... 9
Quick Menu ............................................................................................................ 9
Live ....................................................................................................................... 11
Playback...............................................................................................................12
Playback Control................................................................................................... 12
Task Bar ................................................................................................................ 13
Time Bar ............................................................................................................... 13
Remote Sengs ...................................................................................................14
Display Menu........................................................................................................ 14
Live .............................................................................................................14
Image Control.............................................................................................15
Privacy Zone ...............................................................................................16
Record Menu ........................................................................................................ 16
Rec Parameters...........................................................................................16
Record Schedule.........................................................................................17
Record Snapshot ........................................................................................17
Network Menu ..................................................................................................... 18
Network Seng..........................................................................................18
WiSet........................................................................................................19
Video Streaming.........................................................................................19
Email...........................................................................................................20
DDNS ..........................................................................................................20
IP Filter .......................................................................................................21
RTSP............................................................................................................ 21
FTP.............................................................................................................. 21
Contents
PLM00 User’s Manual
3
Alarm Menu.......................................................................................................... 22
Moon........................................................................................................22
Wireless Alarm Status ................................................................................22
Wireless Alarm Sensor ...............................................................................23
Device Menu ........................................................................................................ 23
SD Card.......................................................................................................23
Log..............................................................................................................24
Audio ..........................................................................................................24
Audio File....................................................................................................24
BreathingLight ............................................................................................25
System Menu........................................................................................................ 25
Date/Time ..................................................................................................25
Users........................................................................................................... 26
Info .............................................................................................................26
Advanced Menu ................................................................................................... 27
Firmware Update........................................................................................27
Load Default ............................................................................................... 27
Maintain .....................................................................................................27
Local Sengs........................................................................................................ 28
Informaon........................................................................................................... 28
Logo.................................................................................................................... 28
4
WiFi IP Camera User’s Manual
Safety Informaon
Warning
This is the symbol for indicang any potenal hazard,
risk or condion requiring special aenon.
The user needs to refer to the important operang
and maintenance or servicing instrucons.
Cauon
The lighng ash with an arrow head symbol, in an
equilateral triangle, is intended to alert the user.
There is dangerous “voltage” presence near by the
product’s enclosure which may be risk of person.
Safety Precauons
1. Read the user manual carefully before aempng
to install the camera and keep the manual for future
reference.
2. Follow all instrucons.
3. Always keep the glass lens clean to obtain the best
picture quality. Clean only with dry cloth.
4. Do not install near water or heat sources such as
radiators or other apparatus that produce heat.
5. Do not install the camera in places with high humidity.
6. Do not install the camera in places highly exposed to
gas or oil.
7. Do not install the camera in places enclosed by metal.
This may shield the electromagnec waves and cause
signal recepon to fail.
8. Do not touch the camera with wet hands.
9. Do not expose the camera to radioacvity or place
near medical equipment with radio waves.
10. Do not service the camera by yourself. Refer all
servicing to authorized personnel.
11. Always handle the device with care.
Warning
To prevent re or shock, DO NOT expose the unit to rain or
moisture.
Cauon
To reduce the risk of electric shock, DO NOT use other power
cables other than the one supplied.
FCC Compliance Statement
This equipment has been tested and found to comply
with the limits for a Class C digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful
interference to radio communicaons. Operaon of this
equipment in a residenal area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
Modicaons not expressly approved by the
manufacturer could void the user’s authority to operate
the equipment under FCC rules.
Copyright
Copyright @All Rights Reserved.
All other trademarks menoned in this manual are
trademarks of their respecve companies.
Limitaon of Liability
• This publicaon is provided “AS IS” without warranty of
any kind, either expressed or implied, including but not
limited to, the implied warranes of merchantability,
tness for any parcular purpose, or non-infringement
of a third party’s rights.
• This publicaon may include technical inaccuracies
or typographical errors. Changes may be made to
the informaon herein, at any me, for publicaon
improvements and/or of the corresponding device(s).
Disclaimer of Warranty
In no event shall the supplier be liable to any party
or any person, except for replacement or reasonable
maintenance of the product, for the cases, including but
not limited to the following:
• Any damage or loss, including but without limitaon,
direct or indirect, special, consequenal or exemplary,
arising out of or relang to the device;
• Personal injury or any damage caused by inappropriate
use or negligent operaon of the user;
• Unauthorized disassemble, repair or modicaon of
the device by the user;
• Any problem, consequenal inconvenience, or loss or
damage, arising out of combining the system with the
devices of a third party;
• Any claim or acon for damages, brought by any
person or organizaon being a photogenic subject, due
to violaon of privacy with the result of pictures from
a surveillance camera, including saved data, for some
reason, becomes public or is used for the purpose
other than for surveillance.
Safety and Regulatory Info
WiFi IP Camera User’s Manual
5
Set Up Your Camera Wirelessly Through Your Mobile Devices
To connect the IP camera to the WiFi network, perform the following:
IMPORTANT!
• Make sure the IP camera is powered on.
• Make sure your smartphone/tablet uses WiFi connecon, not mobile data network.
1. Scan the QR code on the IP camera with your smartphone/tablet. You will be directed to KViewLink app
download site.
2. Download and open the KViewLink app in your smartphone/tablet.
3. Tap to add a new IP camera.
4. Tap Skip to skip the introducon and access the connecon page.
5. Tap Smart WiFi.
3
4
5
6. When you hear the ding-dong sound form the IP camera, scan the QR code on the IP camera.
Web Client
6
WiFi IP Camera User’s Manual
Web Client
7. Enter the name for the IP camera and tap Connue.
8. Enter the password of the WiFi router and tap OK.
IMPORTANT! Your smartphone/tablet and IP camera must be connected to the same WiFi router.
Wait unl the conguraon is done. When you see the Live view, this indicates the setup is complete.
78
Congure the IP Camera Using the KViewLink App
To congure the IP camera sengs on KViewLink app, tap next to the IP camera you
want to set up. Then select Advanced Sengs and perform the necessary conguraons.
Congure the IP Camera Using the Web Client
Most funcons of IP camera can be congured through “Advanced Sengs” on KViewLink app. But there are some
funcon sengs, such as DST, image control, DDNS, footage downloading, IP Filter, and etc, are not available on the
KViewLink app. These sengs must be set on the Web Client. Prior accessing the IP camera’s Web Client through your
notebook, make sure the IP camera is connected to the WiFi network and your notebook is connected to the same
WiFi router as your IP camera.
Internet
PLM00
IP Camera
Notebook
WiFi Router
WiFi IP Camera User’s Manual
7
Web Client
NOTE:
• For more informaon on connecng the IP camera to the WiFi network, please follow the the instrucons wrien in
supplied Quick Guide.
To access the Web Client, perform the following:
1. Download and install the DeviceSearch soware to your notebook.
NOTE: The DeviceSearch soware is available at hp://kguardsecurity.server289.com/kguard/
KguardWEBSite/Ulity/IPcam/PLM00/.
2. Double-click the icon to open the remote tool.
3. The program lists the IP camera by IP address. Click on the IP camera IP address eld to open the IP camera
Web Client on your notebook default web browser.
NOTE: If you need to alter the connecon parameters, do the modicaons rst and then click Modify to
save the sengs.
Log In
1. Enter the user name and password.
2. Click Login to sign in.
NOTE: The default user name and password are “admin”and “123456”.
8
WiFi IP Camera User’s Manual
Web Client
Live Screen
Aer you login to Web Client, the Live screen opens. On Live screen, you will see the live view from the IP camera,
access the Quick menu and funcons on the Task bar, select a screen mode, and congure local and remote sengs.
Screen mode
Quick menu
Live view
Task bar
Stop/Play Live view
Task Bar
To access the common funcons, click the respecve icon shown on the task bar.
• Click to zoom in an area on the video.
• Click to start recording manually. The video recording starts and the icon changes from to . Click the
icon again to stop the manual recording. A dialog box appears on the screen.
The recording is saved to the default locaon in your notebook. To change the video saving locaon, refer to “Local
Sengs” on page 28. To open the recording folder, click “Open”.
• Click to capture a snapshot. A dialog box appears on the screen.
WiFi IP Camera User’s Manual
9
Web Client
The snapshot is saved to the default locaon in your notebook. To view the snapshot, click “PreView”. To change the
snapshot saving locaon, refer to “Local Sengs” on page 28. To open the snapshot folder, click “Open”.
• Click to mute audio.
• Click to acvate microphone and send your voice to the IP camera.
NOTE: You can talk between the PC and IP camera if an audio device is connected.
Screen Mode
Select the streaming mode between MainStream, SubStream, and MobileStream for the remote live view on
notebook. Modicaons to the streaming mode do not aect the recorded video. You can also choose to display the
remote view in Portrait mode or Full Screen mode.
• Portrait mode ( ): • Full Screen mode ( ):
NOTE: Streaming mode sengs depend on the streaming parameters set in “Video Streaming” on page 19.
Quick Menu
To congure the IP camera breathing, adjust the color sengs, and start using Cruise mode, click the respecve icon
shown in the Quick menu.
• Click to disable the IP camera breathing eect. Click to enable IP camera breathing eect.
• Click to adjust the color sengs of the video.
- Hue ( ): Adjust the red and green balance of the video.
- Brightness ( ): Adjust the brightness level of the video.
- Contrast ( ): Adjust the level of dierence between the lightest and darkest
parts of the video.
- Saturaon ( ): Set the color intensity of the video.
- Sharpness ( ): Adjust the sharpness of the video.
NOTE: Click Default to reset all color sengs to the default values.
10
WiFi IP Camera User’s Manual
Web Client
• Click to set preset points and use Cruise mode.
To add a preset point, perform the following:
1. Click the direcon arrows on the pointer pan to move the camera to the
desired direcon. 1
2. Click to add the preset point. 2
3. Click to go to the preset point (for tesng). 3
4. Repeat steps 1 to 3 to add more preset points.
1
2
3
To delete a preset point, perform the following:
1. Enter the preset point number you want to delete. 1
2. Click to delete the preset point. 2
1
2
Table des matières
Autres manuels Kguard Caméra de sécurité
