Keysight Technologies M9037-00100 Manuel utilisateur

Keysight M9037-00100 Cooling Cover Installation Guide

Keysight’s M9037 Cooling Cover is required for the M9037A PXIe High

Performance Embedded Controller for maximum cooling. The Cooling Cover

should be used for all applications that use a combination of high-power

modules.

Electrostatic Discharge (ESD)

Electrostatic discharge (ESD) can damage or destroy electronic components.

All work on electronic assemblies should be performed at a static-safe work

station. The figure on the right shows an example of a static-safe work station

protection. Purchase acceptable ESD accessories from your local supplier.

•Conductive table-mat and wrist-strap combination.

•Conductive floor-mat and heel-strap combination.

Both types, when used together, provide a significant level of ESD protection.

Of the two, only the table-mat and wrist-strap combination provides adequate

ESD protection when used alone. To ensure user safety, the static-safe

accessories must provide at least 1 MΩof isolation from ground.

Inspect for Damage

After unpacking the Cooling Cover, carefully inspect it for any shipping damage. Report any damage to the

shipping agent immediately, as such damage is not covered by the warranty.

Cooling Cover Installation

1. Make sure the PXI chassis power is turned off. Leave the power cable connected for grounding purposes.

2. Remove the M9037A from the chassis and place it on a static-safe conductive mat.

3. Remove the four Torx T8 screws indicated below. Retain these screws; they are used to attach the Cooling

Cover.

To avoid damage when handling the M9037A Embedded Controller; do not touch exposed connector pins.

Table des matières

Autres manuels Keysight Technologies Contrôleurs

Keysight Technologies

Keysight Technologies M9035A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies M9036A PXIe Manuel utilisateur

Keysight Technologies

Keysight Technologies M9037A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies M9037A Instructions générales

Keysight Technologies

Keysight Technologies N52 Series Manuel

Keysight Technologies

Keysight Technologies M9036A PXIe Guide de démarrage rapide

Keysight Technologies

Keysight Technologies N5261A Manuel

Keysight Technologies

Keysight Technologies M9537A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies M9038A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies M9037A Manuel utilisateur

Keysight Technologies

Keysight Technologies N1002A Manuel utilisateur

Keysight Technologies

Keysight Technologies M9036A PXIe Manuel utilisateur

Keysight Technologies

Keysight Technologies M9036A PXIe Guide de l'utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur