KERN EOB-A01 Manuel utilisateur

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Phone: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

Assembly instructions Tripod

KERN EOB-A01-A01N

Version 1.0

03/2013

EOB-A01

EOB-A01N

EOB-A01-A01N-IA-e-1310

2 EOB-A01-A01N-IA-e-1310

KERN EOB-A01-A01N

Version 1.0 03/2013

Assembly instructions Tripod

Contents

1Technical data.........................................................................................................2

2Scope of delivery ....................................................................................................3

3Assembly EOB-A01.................................................................................................3

3.1 Assemble the tripod to the balance.................................................................................3

3.2 Assemble the display unit to the tripod...........................................................................4

4Assembly EOB-A01N..............................................................................................4

4.1 Assemble the tripod to the balance.................................................................................4

4.2 Assemble the display unit to the tripod...........................................................................5

EOB-A01 EOB-A01N

Suitable only for medical balances

with platform size up to 310 x 300

mm.

Only suitable for non–medical

balances with platform size up to

310 x 300 mm.

1 Technical data

KERN EOB-A01 EOB-A01N

Net weight 1150 g 1645 g

Tripod height 450 mm 450 mm

EOB-A01-A01N-IA-e-1310 3

2 Scope of delivery

EOB-A01 EOB-A01N

1. Tripod

2. Fastening screws

3. Turning knobs for assembly display unit

4. Support screw

1. Tripod

2. Fastening screws

3. Turning knobs for assembly display unit

4. Support screw (already assembled)

5. Rubber cover

3 Assembly EOB-A01

3.1 Assemble the tripod to the balance

Example:

(Figure approximately)

Fasten the tripod acc. to illustration with

the 4 screws on the lower side of the

platform.

Observe that during screwing

down not too much pressure is performed

on the weighing pan.

4 EOB-A01-A01N-IA-e-1310

(Figure approximately)

Turn-in support screws for stabilisation at

the lower side of the tripod.

3.2 Assemble the display unit to the tripod

Secure the display unit with the two

black rotary knobs to the tripod

according to illustration.

Position display unit with the rotary

knobs.

4 Assembly EOB-A01N

4.1 Assemble the tripod to the balance

Fasten the tripod acc. to illustration with

the 4 screws on the lower side of the

platform.

Observe that during screwing

down not too much pressure is performed

on the weighing pan.

EOB-A01-A01N-IA-e-1310 5

Adapt the rubber cover in the provided

opening at the lower side of the tripod.

Unscrew the support screw until the

balance is in a stable and horizontal

position.

4.2 Assemble the display unit to the tripod

Secure the display unit with the two

black rotary knobs to the tripod

according to illustration.

Position display unit with the rotary

knobs.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels KERN Échelle

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur