8
X34-56xx-xx
■Special displays when all lights are on in STANDBY source
Key Description of display Description
Common
All lights ON. All lights ON.
1
Destination terminal
condition indication TP11 “TYPE” indicates system μ-com (IC1) destination, and shows
real-time condition of the destination terminal.
Development ID
condition indication 8:00701K Development ID – Version (system μ-com: IC1)
2 Serial No. display 00000000 Serial No. is displayed (8 digits)
3
Power ON time display
Pon 0HXX 00~50 is displayed for “XX”. When less than 1 hour,
displayed by displayed by increments of 10 minutes.
PonXXXXX 00001~10922 is displayed for “XXXXX”. MAX 10922 (hours)
■3When Power ON time is displayed, press and hold for
2 seconds or longer to clear Power ON time.
4
Disc operation time dis-
play
PLy 0HXX 00~50 is displayed for “XX”. When less than 1 hour,
displayed by increments of 10 minutes.
PLyXXXXX 00001~10922 is displayed for “XXXXX”. MAX 10922 (hours)
■4
While the disc operation time is displayed, press and hold for
2 seconds or longer to clear the disc operation time.
(Cleared only for displayed media.)
5
Disc EJECT times display
EJCXXXXX Disc EJECT times display. MAX 65535 (times)
■5While disc EJECT times is displayed, press and hold for
2 seconds or longer to clear disc EJECT times.
6
Panel open/close
times display
PC XXXXX PANEL open/close times display. MAX 65535 (times)
■6
Press the key for more than 2 seconds while the PANEL open/
close count is displayed and PANEL open/close count is cleared.
FM ROM correction version
display
0123 The number is the ROM correction version number.
ER When E2PROM is not installed.
–––– When not written in yet.
oooo When data not matched. (due to the difference in versions)
Audio data initialization InIT AUDIO setting value is re-set to the test mode default value.
Forced Power OFF
information display
POFF ––– No forced power OFF
POF F P n L Forced power OFF by communication error between system
μ-com and panel.
■ While the forced power OFF data is displayed, press and
hold for 2 seconds to clear the data.
CD information display
mode ON/OFF
For the display contents, refer to “CD information display
mode” in the next section.
■ While in CD information display mode, press and hold for
2 seconds or longer to clear all CD information.
TEST MODE (7-SEG LCD)
