KENTMASTER 203 Guide produit

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 1 OF 28

203

INCLUDING: OPERATION, INSTRUCTION, INSTALLATION, MAINTENANCE AND PARTSBOOK

IMPORTANT: READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR

SERVICING THIS TOOL.

BEEF SPLITTING SAW

TOOL DATA

MODEL: KENTMASTER 203

ASSEMBLY NO. 1200000

TYPE: ELECTRICAL OPERATED

NET WEIGHT: 206 LB (94 KG)

MOTOR HORSEPOWER: 3HP / 50Hz, 60Hz

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 2 OF 28

OPERATING AND SAFETY INSTRUCTIONS

DO NOT OPERATE THIS TOOL UNTIL YOU HAVE READ AND UNDERSTOOD THE SAFETY

INSTRUCTIONS AND OPERATING MANUALS.

DO NOT OPERATE THIS TOOL UNTIL YOU HAVE RECEIVED TRAINING IN THE HANDLING,

OPERATION AND USE OF THIS TOOL.

STOP USING A MALFUNCTIONING OR DEFECTIVE TOOL IMMEDIATELY. REPORT ANY

PROBLEMS OR DEFECTS TO YOUR SUPERVISOR FOR REMOVAL OF THE TOOL FROM

SERVICE.

DO NOT ATTEMPT TO REPAIR THE TOOL YOURSELF.

DO NOT ALLOW UNAUTHORIZED PERSONS TO USE TOOL.

REMOVE AND DISCONNECT POWER FROM THE TOOL WHEN TOOL IS LEFT UNATTENDED OR

IS NOT IN USE.

NEVER TIE DOWN, BYPASS, ALTER OR MODIFY THE ACTIVATING SWITCHES OR TRIGGERS OF

THIS TOOL.

NEVER MAKE ALTERATIONS OR MODIFICATIONS TO THIS TOOL.

BE CONSTANTLY AWARE AND ALERT FOR UNSAFE CONDITIONS AND REPORT THEM

IMMEDIATELY TO YOUR SUPERVISOR.

NEVER PLACE YOUR HAND OR ANY PART OF YOUR BODY IN THE CUTTING PATH OF THE

TOOL.

NEVER ALLOW ANYONE ELSE TO PLACE THEIR HANDS OR ANY PART OF THEIR BODY IN THE

CUTTING PATH OF THE TOOL.

DO NOT ACTIVATE CONTROL SWITCHES OR TRIGGERS OF THIS TOOL UNLESS YOU INTEND

TO TEST OR OPERATE THIS TOOL.

DO NOT USE THIS TOOL FOR ANY PURPOSE OTHER THAN IT’S INTENDED PURPOSE.

WHEN OPERATING THIS TOOL WEAR THE PROTECTIVE GEAR AND SAFETY EQUIPMENT

SUPPLIED TO YOU.

THE NOISE EMISSION (SOUND PRESSURE LEVEL) AT THE WORKSTATION MAY EXCEED 80 dB

(A). EAR AND SOUND PROTECTION GEAR IS REQUIRED.

= Hazards or unsafe practices which could result in severe personal injury,

death or substantial property damage.

= Hazards or unsafe practices which could result in minor personal injury,

product or property damage.

= Important installation, operation or maintenance information.

!WARNING

!CAUTION

!WARNING

!CAUTION

!NOTICE

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 3 OF 28

SERVICE

1. KEEP GOOD RECORDS OF ALL SERVICE ACTIVITY AND INCLUDE TOOL IN PREVENTIVE MAINTENANCE PROGRAM.

2. USE ONLY GENUINE KENTMASTER REPLACEMENT PARTS TO ASSURE PROPER PERFORMANCE OF TOOL.

3. CONTACT THE KENTMASTER SUPPLIER NEAREST YOU FOR PARTS AND CUSTOMER SERVICE INFORMATION.

PARTS BOOK

“203” MAIN ASSEMBLY

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 4 OF 28

Figure 1 MODEL “203"

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 5 OF 28

1200000: 203 - BEEF SPLITTING SAW

ITEM PART # DESCRIPTION QTY

1 OPTIONS MOTOR ASSEMBLY / REQUIRED 1

1002420 POWER CORD ASSEMBLY, NON 42V 1

2 1002430 POWER CORD ASSEMBLY, 42V 1

4100130 BLADE, STANDARD. 3TPI 1

4100140 BLADE, 4TPI 1

3 4100240 BLADE, "SKIP TOOTH". 2TPI 1

1200900 BALANCE SEGMENT (60 Hz CYCLE) 1

4 1202490 BALANCE SEGMENT (50 Hz CYCLE) 1

5 1200040 COVER, HOUSING 1

6 1200080 HANDLE 1

7 1200180 TRIGGER 1

8 1200190 BUSHING 1

9 1200200 TRIGGER SHAFT 1

10 1200220 SPRING 1

11 1200430 ECCENTRIC 1

12 1200460 BUSHING 1

13 1200670 FLY WHEEL 1

14 1200760 CAP, SPRING COVER 1

15 1201580 SPACER RING 1

16 1201700 WIRE BOX 1

17 1201760 WATER SPRAY - 203 (OPTIONAL) 1

18 1201770 YOKE BLOCK 1

19 1201780 CONNECTING ROD 1

20 1202080 GASKET 1

21 1202540 SWITCH PLATE ASSEMBLY 1

22 1203001 FRAME AND REAR HANDLE ASSEMBLY 1

23 1203002 YOKE AND SUSPENSION ARM 1

24 1702620 SCREW 1

25 3005120 NILOS RING 2

26 3122160 BEARING 1

27 3532040 BEARING 1

28 3650170 TAPER BEARING CUP 2

29 3650420 TAPER BEARIN CONE 2

30 5100780 RETAINING RING 1

31 5604920 RETAINING RING 2

32 7000060 PLUG 1

33 7016100 LUBE FITTING 1

34 8031060 SCREW 3

35 8109020 SCREW 1

36 8110040 SCREW 3

37 8210040 SCREW 3

38 8211060 SCREW 10

39 8213160 SCREW 5

40 8333050 SET SCREW 1

41 8411120 SCREW 2

42 8506650 WASHER 1

43 8507090 WASHER 3

44 8507100 WASHER 3

45 8613180 PIN 1

Figure 2 BOM FOR MODEL “203”

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 6 OF 28

MOTOR ASSEMBLY

Figure 3 MOTOR ASSEMBLY

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 7 OF 28

MOTOR ASSEMBLY

ITEM PART # DESCRIPTION QTY

1 OPTIONS STATOR, SEE CHART BELOW 1

2 1201620 MOTOR HOUSING 1

3 1201630 COVER, MOTOR HOUSING 1

4 1201640 GUARD - FAN 1

5 1201651 FAN ASSEMBLY 1

6 1201671 ROTOR SHAFT ASSEMBLY 1

7 1202370 HANDLE 1

8 2000040 NAME PLATE 1

9 3524050 BEARING 1

10 3532060 BEARING 1

11 5002810 RETAINING RING 2

12 5100980 RETAINING RING 1

13 5101180 RETAINING RING 1

14 8081020 SCREW 2

15 8211140 SCREW 4

16 8211240 SCREW 4

17 8313040 SET SCREW 2

18 8413080 SCREW 2

19 8415100 SCREW 4

20 8506160 WASHER 4

21 8506600 WASHER 8

22 8507150 WASHER 2

23 8605030 KEY 1

24 8605160 KEY 1

MOTOR, 3HP, 42V, 3PH, 50HZ, - 60.0AMPS 1202238 2311680

MOTOR, 3HP, 380V, 3PH, 50HZ - 6.6AMPS 1202237-380-350 2311740

MOTOR, 3HP, 220V, 3PH, 50HZ - 11.4AMPS 1202237-220-350 2311740

MOTOR, 3HP, 416V, 3PH, 50HZ - 6.0AMPS 1202233-416-350 2310601

MOTOR, 3HP, 208V, 3PH, 50HZ - 12.0AMPS 1202233-208-350 2310601

MOTOR, 3HP, 230V, 3PH, 50HZ - 11.0AMPS 1202235-230-350 2311700

MOTOR, 3HP, 115V, 3PH, 50HZ - 22.0AMPS 1202235-115-350 2311700

MOTOR, 3HP, 550V, 3PH, 60HZ - 5.0AMPS 1202234 2310620

MOTOR, 3HP, 416/460V, 3PH, 60HZ - 6.0AMPS 1202233-460-360 2310601

MOTOR, 3HP, 208/230V, 3PH, 60HZ - 12.0AMPS 1202233-230-360 2310601

DESCRIPTION MOTOR OPTION STATOR (ITEM 1)

MOTOR ASSEMBLY OPTIONS (STATOR)

Figure 4 BOM FOR MOTOR ASSEMBLY

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 8 OF 28

Figure 5 1201671: ROTOR –SHAFT ASSEMBLY

Figure 6 1201651: MOTOR FAN ASSEMBLY

1201671: ROTOR SHAFT ASSEMBLY

ITEM PART # DESCRIPTION QTY

1 1201670 SHAFT 1

2 2315030 ROTOR 1

3 8605160 KEY 1

1201651: FAN ASSEMBLY

ITEM PART # DESCRIPTION QTY

1 1201650 FAN 1

2 8411180 SCREW 2

3 8501410 NUT 2

4 8507100 WASHER 2

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 9 OF 28

POWER SUPPLY

Figure 7 1002420: POWER SUPPLY, NON 42V

Figure 8 1002430: POWER SUPPLY, 42V

1002420: POWER CORD ASSEMBLY, NON 42V

ITEM PART # DESCRIPTION QTY

1 2001240 POWER CORD 1

2 2001270 CABLE CONNECTOR 1

3 2001610 PLUG, MALE 1

4 2001620 SOCKET, FEMALE 1

5 2008510 CORD GRIP 1

1002430: POWER CORD ASSEMBLY, 42V

ITEM PART # DESCRIPTION QTY

1 2001270 CABLE CONNECTOR 1

2 2001700 GROMMET 1

3 2007030 POWER CORD 1

REV C: 12/15/04

KENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA

TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 10 OF 28

SWITCH ASSEMBLY

Figure 9 1202540: SWITCH PLATE ASSEMBLY

1202540: SWITCH PLATE ASSEMBLY

ITEM PART # DESCRIPTION QTY

1 1201960 WIRE BOX GASKET 1

2 1202520 WIRE BOX COVER 1

3 2000130 ON-OFF PLATE 1

4 2000140 BOOT, TOGGLE SWITCH 1

5 2000690 SWITCH 1

6 2000730 SWITCH 1

7 2000770 TOP PLATE, SWITCH 1

8 8029020 SCREW 2

9 8029040 SCREW 5

10 8507090 WASHER 5

Table des matières

Autres manuels KENTMASTER Scie

KENTMASTER

KENTMASTER 210-JI Manuel utilisateur

KENTMASTER

KENTMASTER HSC-650 Manuel d'utilisation et d'entretien

KENTMASTER

KENTMASTER ABB-II Manuel utilisateur

KENTMASTER

KENTMASTER BANDMASTER BM-V-LD Manuel d'utilisation et d'entretien

KENTMASTER

KENTMASTER 210-JB Manuel utilisateur

KENTMASTER

KENTMASTER Super Speed Manuel utilisateur

KENTMASTER

KENTMASTER 77 Manuel utilisateur

KENTMASTER

KENTMASTER SL-1100 Manuel utilisateur

KENTMASTER

KENTMASTER 160-JB-A Manuel utilisateur

KENTMASTER

KENTMASTER AD Manuel utilisateur

KENTMASTER

KENTMASTER 180-JB-A Manuel utilisateur

KENTMASTER

KENTMASTER 160-JI Manuel utilisateur

KENTMASTER

KENTMASTER ZIP Mode d’emploi

KENTMASTER

KENTMASTER 160-JB Manuel utilisateur

KENTMASTER

KENTMASTER 500E Manuel utilisateur

KENTMASTER

KENTMASTER 75 Manuel d'utilisation et d'entretien

KENTMASTER

KENTMASTER HKM-III Manuel utilisateur

KENTMASTER

KENTMASTER 210-JB-A Manuel utilisateur

Manuels Scie populaires d'autres marques

RIDGID

RIDGID BS1400 Manuel utilisateur

ATIKA

ATIKA BWS 400-2 Manuel utilisateur

RGC

RGC FS20 Manuel utilisateur

Makita

Makita M2300 Manuel utilisateur

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuel utilisateur

IMET Spa

IMET Spa SIRIO 370 AF-E Manuel utilisateur

Optimum

Optimum OPTisaw CS 275 Manuel utilisateur

Makita

Makita BPB180 Manuel utilisateur

Stihl

Stihl MS 462 C-M Manuel utilisateur

AEG

AEG TS 250 K Manuel utilisateur

Meec tools

Meec tools 004665 Manuel utilisateur

Makita

Makita LS1018L Manuel utilisateur

Ryobi

Ryobi RCS1400 Manuel utilisateur

DeWalt

DeWalt DCS391 Manuel utilisateur

Sealey

Sealey SA72 Manuel utilisateur

skilsaw

skilsaw SPT88 Instructions de montage

Urrea

Urrea SI810 Dimensions et guide d'installation

EINHELL

EINHELL BKG 210/1 Manuel utilisateur