OPERATING THE MACHINE
Only people who understand the safety information and instructions in this manual may op-
erate the equipment. Be alert and careful when working with the machine and only use the
tool or product in the manner described in this manual. When working with equipment that
has moving parts, there is always the risk of injury. Be careful when working with equipment
equipped with hydraulic hoses ,oil under pressure can penetrate the skin. Seek medical
attention immediately if this occurs. Always work alone with the tools that are dened as sin-
gle porpose tools. Respect the equipment’s danger zone.
• Place the machine on stable at surface.
• Plug the power cord into a grounded 400V. Always check that the power cables and elec-
trical connectors are not damaged before use.
• Check that the engine / hydraulic pump is running in the right direction. Rotation is
changed easily with phase inverter that is mounted on the machine.
• Press the engine start button, then the machine is ready to use.
• After nishing the work, switch OFF the power and unplug.
• Switch OFF the power and unplugg the machines when you leave even if only for a brief
moment. This ensures that no one in particular children can access and maneuver the
machine accidentally while playing.
Warning!
Never use faulty safety equipments!
CUTTING AND SPLITTING OF WOOD
• Walk around and study the machine to familiarize yourself with its features before you
start.
• Press the engine start button. Wait a few minutes until the oil has gone up to working
temperature. Run the machine several times without placing any wood and check all the
features (feeding, cutting, splitting logs) before the actual work begins to get used to the
controls. Set the right speed on the chainsaw. Make sure no one has hands or arms inside
the machine.
• Place a straight, delimed log on the conveyor and point it at the chainsaw .
• Set the length to the desired length.
• Check the chain oil during operation and at regular intervals and rell if necessary.
• Start the splitting by bringing it forward. The pressure plate pushes the rewood against
the splitting wedge. CAUTION! Be careful when splitting of hardwood, knotty and / or
crusty wood. Some types of wood can crack or y o, which may result in injury.
• If the wood gets stuck in the cleaver: Retract pressure plate to the starting position, open
the protective cover, ensure that the machine is turned o. Warning of crushing! Make
sure the pressure plate is in its original position and has stopped moving before doing
anything to the machine. Never put your hand or other body part between the ramming
plate and the knife, instead use suitable tools such as shives or pry bar to remove the
jammed wood. If you need to turn o the wood use appropriate tools such as a club,
never use your hands
