KEBCO Pre Series Manuel utilisateur
PREfACE
3
Preface
The hardware and software described in this document are products of KEB. The infor-
mation contained in this document is valid at the time of publishing. KEB reserves the
right to update this document in response to misprints, mistakes or technical changes.
Signal words and symbols
Certain procedures within this document can cause safety hazards during the installati-
on or operation of the device. Refer to the safety warnings in this document when per-
forming these procedures. Safety signs are also located on the device where applicable.
A safety warning is marked by one of the following warning signs:
Dangerous situation, which will cause death or serious injury iif this safe-
ty warning is ignored.
Dangerous situation, which may cause death or serious injury if this
safety warning is ignored.
Dangerous situation, which may cause minor injury if this safety warning
is ignored.
Situation, which can cause damage to property if this safety warning is
ignored.
RESTRICTION
Used when the following statements depend on certain conditions or are only valid for
certain ranges of values.
Used for informational messages or recommended procedures.
More symbols
►This arrow starts an action step.
• / - Enumerations are marked with dots or indents.
=> Cross reference to another chapter or another page.
Note to further documentation.
www.keb.de/service/downloads
DANGER
WARNING
CAUTION
NOTICE
PREfACE
4
Here you will find our general sales conditions.
www.keb.de/terms-and-conditions
Laws and guidelines
KEB Automation KG confirms with the EC declaration of conformity and the CE mark on
the device nameplate that it complies with the essential safety requirements.
The EC declaration of conformity can be downloaded on demand via our website. Fur-
ther information is provided in chapter "Certification".
Warranty and liability
The warranty and liability on design, material or workmanship for the acquired device is
given in the general sales conditions.
Further agreements or specifications require a written confirmation.
Support
Although multiple applications are referenced, not every case has been taking into ac-
count. If you require further information or if problems occur which are not referenced in
the documentation, you can request the necessary information via the local KEB agency.
The use of our units in the target products is outside of our control and therefore
lies exclusively in the area of responsibility of the customer.
The information contained in the technical documentation, as well as any user-specific
advice in spoken and written and through tests, are made to best of our knowledge and
information about the intended use. However, they are regarded as being only informal
and changes are expressly reserved, in particular due to technical changes. This also
applies to any violation of industrial property rights of a third-party. Selection of our units
in view of their suitability for the intended use must be done generally by the user.
Tests can only be done within the intended end use of the product (application) by
the customer. They must be repeated, even if only parts of hardware, software or
the unit adjustment are modified.
Copyright
The customer may use the instructions for use as well as further documents or parts
from it for internal purposes. Copyrights are with KEB and remain valid in its entirety.
This KEB product or parts thereof may contain third-party software, including free and/
or open source software. If applicable, the license terms of this software are contained
in the instructions for use. The instructions for use are already available to you, can be
downloaded free of charge from the KEB website or can be requested from the respec-
tive KEB contact person.
Other wordmarks or/and logos are trademarks (™) or registered trademarks (®) of their
respective owners.
TABLE Of CONTENTS
5
Table of Contents
Preface......................................................................................................................................................3
Signal words and symbols...............................................................................................................3
More symbols ..................................................................................................................................3
Laws and guidelines........................................................................................................................4
Warranty and liability .......................................................................................................................4
Support............................................................................................................................................4
Copyright .........................................................................................................................................4
Table of Contents ....................................................................................................................................5
List of Tables ...........................................................................................................................................6
List of figures .................................................................................................................................6
1 Basic Safety Instructions .............................................. 7
1.1 Target group......................................................................................................................................7
2 Product Description....................................................... 8
2.1 Intended use......................................................................................................................................8
2.2
factory setting..........................................................................................................................8
2.3 Nameplate..........................................................................................................................................9
3 Hardware....................................................................... 10
3.1 Overview Bluetooth-Adapter ........................................................................................................10
3.2 Technical data.................................................................................................................................10
3.3 Status LED...................................................................................................................................... 11
4 Software ........................................................................ 12
4.1 COMBIVIS mobile App....................................................................................................................12
4.2 functions and features of the COMBIVIS mobile App.................................................................12
4.3 Screenshots of the COMBIVIS mobile App..................................................................................13
4.4 Applications of the COMBIVIS mobile App ..................................................................................15
4.5 Connection setup ...........................................................................................................................15
5 Revision History........................................................... 16
LIST Of TABLES
6
List of Tables
Figure 1: Nameplate Bluetooth-Adapter ............................................................................................ 9
Figure 2: Overview Bluetooth-Adapter ............................................................................................ 10
Figure 3: Connection ....................................................................................................................... 13
Figure 4: Status ............................................................................................................................... 13
Figure 5: Error messages ................................................................................................................ 13
Figure 6: Digital I/O.......................................................................................................................... 13
Figure 7: Velocity Mode ................................................................................................................... 14
Figure 8: Speed ............................................................................................................................... 14
Figure 9: Backup.............................................................................................................................. 14
Figure 10: Service.............................................................................................................................. 14
List of figures
Table 1: Factory settings .................................................................................................................. 8
Table 2: Technical data .................................................................................................................. 10
Table 3: Status LED .......................................................................................................................11
BASIC SAfETy INSTRUCTIONS
7
1 Basic Safety Instructions
The Bluetooth-Adapter has been developed and built in accordance with the state of the
art and recognised safety regulations. Nevertheless, the function of the machine may
cause danger to life and limb of the user or third parties or damage to the machine and
other property.
Safety rules and hazards.
►The safety instructions listed in this manual apply in addition to the
basic safety instructions for the drive controller !
►These can be found in the corresponding instructions for use.
►All instructions for use are available in the download area of
www.keb.de.
1.1 Target group
This manual is intended for use by qualified electricians only. Qualified electricians as
defined in this manual must have the following qualifications:
• Knowledge and understanding of safety instructions.
• Skills for installation and assembly.
• Start-up and operation of the product.
• Understanding of the function in the used machine.
• Recognition of dangers and risks of electrical drive technology.
• Knowledge of
DIN IEC 60364.
• Knowledge of
EN 60664-1.
• Knowledge of national safety regulations (e.g. DGUV Regulation 3).
NOTICE
PRODUCT DESCRIPTION
8
2 Product Description
The Bluetooth-Adapter is used to connect KEB drive controllers, operators or controllers
with DIN 66019 interface via Bluetooth connection using the COMBIVIS mobile App.
The Bluetooth-Adapter is not a standard Bluetooth adapter. It can be used exclusively
for the communication with KEB devices with the interface specified above.The convert-
er must be plugged directly on the interface.
2.1 Intended use
The KEB Bluetooth-Adapter is exclusively for operation with KEB drive controllers or
operators. The operation of other electrical consumers is prohibited and can lead to the
destruction of the devices.
The used semiconductors and components of KEB Automation KG are developed and
dimensioned for the use in industrial products. If the product is used in machines, which
work under exceptional conditions or if essential functions, life-supporting measures or
an extraordinary safety step must be fulfilled, the necessary reliability and security must
be ensured by the machine builder.
Operating our products outside the limits specified in the technical data will result in the
loss of any claims for damages.
2.2
factory setting
The KEB adapter is delivered with the following settings (factory settings):
Settings Values
Connection interval
8 ms
Slave latency 0
Advertising interval 20 ms
Baud rate (bps) 38400
Data bit 8
Parity No
Stop bit 1
Hardware flow control No
Command mode via "COMMAND:" Yes
Operating mode Peripheral
Device name KEB BLE XXXXXX (LAP BT address)
Connection Passkey 6 digits: 000000 -999999
Table 1: Factory settings
PRODUCT DESCRIPTION
9
2.3 Nameplate
Legend
Figure 1: Nameplate Bluetooth-Adapter
HARDWARE
11
3 Hardware
3.1 Overview Bluetooth-Adapter
Sub-D 9-pole
DIN 66019 (RS 485) /
HSP5 (TTL level)
Bottom view with nameplate
Top view
Status LED
Figure 2: Overview Bluetooth-Adapter
SOfTWARE
12
3.2 Technical data
Bluetooth-Adapter
Bluetooth Bluetooth 4.1, LinTech BLE SPP Profile
Frequency/max. Transmission power:
Bluetooth 2402-2480 MHz
Receive sens. -87 dBm
Weight in kg 0.3
Ambient conditions during operation -10°…45°C
Ambient conditions at storage -25°…70°C
Climatic category (EN60721-3-3) 3K3
Voltage supply via interface
Potential isolation Internal potential isolation
Table 2: Technical data
3.3 Status LED
State LED
Ready for use/Connectable (advertising
mode)
glows red continuously
Connected (no authentification) blue flash every 300 ms
Connected (authentification confirmed) green flash every 300 ms (5 sec)
Conencted (with authentication) glows green continuously
Data transmission (RX/TX active) yellow flash every 300 ms
Table 3: Status LED
Dimensions in mm (H x W x L) 20 x 35 x 88
– 3.01dBm(EU), -0.12dBm(US, CAN)
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels KEBCO Adaptateur
