Kebby Power Crimp Instruction manuelle
KEBBY
INDUSTRIES
PowerCrimper
& Accessories
Setup and
Operation
Manual
KEBBY INDUSTRIES
4075 Kilburn Ave., Rockford, IL 61101 U.S.A.
Phone: 815-963-1466 • Fax: 815-962-3490
Email: [email protected]
www.kebbyindustries.com
TABLE OF CONTENTS
INTRODUCTION AND SAFETY
INTRODUCTION ....................................................................................................... 2
PROPRIETARY AGREEMENT ................................................................................... 2
SAFETY PRECAUTIONS........................................................................................... 3
SAFETY RECOMMENDATIONS................................................................................ 4
CAUTIONS AND WARNINGS ................................................................................... 5
OCCUPATIONAL SAFETY AND HEALTH ACT.......................................................... 5
ASSEMBLY
ACCESSORY LIST ................................................................................................... 6
KEBBY POWER CRIMP AND ACCESSORIES ......................................................... 7
ASSEMBLY INSTRUCTIONS ................................................................................... 8
ASSEMBLE POWER CRIMP TO CRIMP STAND.................................................... 10
POWER CRIMP HEAD INSTALLATION................................................................... 12
SETUP AND OPERATING
CRIMP SET-UP AND OPERATING INSTRUCTIONS .............................................. 13
CAP REMOVAL SET-UP AND OPERATING INSTRUCTIONS................................. 14
MAINTENANCE
PREVENTIVE MAINTENANCE ................................................................................ 15
STANDARD MAINTENANCE CHARTS ................................................................... 15
MACHINE CLEANING............................................................................................. 16
PNEUMATIC SYSTEM ............................................................................................ 16
PNEUMATIC SYSTEM PREVENTIVE MAINTENANCE ........................................... 17
EFFECTS OF CONTAMINATES ON PNEUMATIC SYSTEMS ................................. 17
KEBBY INDUSTRIES 1
INTRODUCTION AND SAFETY
INTRODUCTION
This manual has been prepared to aid you in the operation of your KEBBY POWER
CRIMP.
The Kebby “Power Crimp” is a pneumatically controlled crimping tool. It has been
designed to increase the speed, ease, pressure and repeatability of crimping for most
sizes of bottles and caps.
Kebby Industries is very well-known for the high quality of all their crimping and
de-capping tools. The Power Crimp is no different. The quality of the Power Crimp is
easily seen in the top grade fittings, high quality regulator assembly, stainless steel hose,
and the corrosion-resistant finish. The variety of accessories will enhance the ease and
function of the Power Crimp.
This unit has been designed for ease in set-up and operation. The Power Heads are
easily removed from the Power Crimp so that size changes can be accomplished
quickly. The Kebby “Power Crimp” and Power Heads will provide a smooth, fast and
accurate crimp. The quickness and quality of the crimp makes the Power Crimp very
cost effective.
Kebby Industries feels that once you have used the Kebby “Power Crimp” and
accessories, you will not want to go back to hand crimping.
PROPRIETARY AGREEMENT
This manual discloses information in which Kebby Industries has proprietary rights.
Neither receipt nor possession of this manual confers or transfers any right to the client,
and by its retention hereof, the client acknowledges that it will not reproduce or cause
to be reproduced, in whole or in part, any such information except by written permission
from Kebby Industries. The client shall have the right to use and disclose to its
employees the information contained herein for the purpose of operating and maintaining
the Kebby “Power Crimp”, and for no other purpose.
The information contained in this manual is believed to be accurate. In spite of
continuous review, there is always a possibility of error, misapplication of content, or
individual misunderstanding.
Kebby Industries assumes no liability for unsatisfactory safety or machine performance
that might result from such error, misapplication or misunderstanding.
2 KEBBY INDUSTRIES
INTRODUCTION AND SAFETY
KEBBY INDUSTRIES 3
SAFETY PRECAUTIONS
This precision tool and accessories have been designed to ensure the maximum safety
for the operator. Only qualified technicians should use this equipment. Alignment,
operation, and maintenance of this unit with all its attached power operated devices
are potentially hazardous if safety precautions are not followed.
Throughout this manual you will be reminded of safety factors:
CAUTION
STORED ENERGY
THIS WARNING SIGN IS A REMINDER
THAT THERE IS DANGER TO PERSONNEL.
BE VERY CAREFUL!
THIS CAUTION SIGN DENOTES:
CARE MUST BE TAKEN OR EQUIPMENT
MAY BE DAMAGED.
THIS SIGN IS USED WHEN DANGEROUS
STORED ENERGY MAY BE PRESENT.
THIS WILL REQUIRE ADDED CAUTION AND A
WELL THOUGHT OUT PLAN BEFORE REPAIR
BEGINS. BE PREPARED TO CHECK OR HAVE
CHECKED ANY PRESSURIZED LINES.
WARNING
CAUTION
SAFETY RECOMMENDATIONS
For your safety and to prevent equipment damage, thoroughly study this manual
and follow these recommendations:
1. Keep the tool and accessories properly maintained. Perform all maintenance in
accordance with the manual provided.
2. Understand how the unit operates. Study the operation manual prior to the general
start-up sequence. If you have any questions, see the proper authority.
3. Never allow untrained personnel to operate the unit or conduct tests.
4. Never operate the unit unless proper maintenance routines have been regularly
performed and the unit is known to be in good working order.
5. Ensure that all guarding, interlocks and safety equipment are in good
condition and in place during the operation of the unit.
6. Be certain tools are properly mounted and locked, and the workpiece is
securely positioned before starting the unit.
7. Never operate any unit beyond its rated speed or capacity.
8. Never reach across or under any moving machine part.
9. Do not wear loose clothing or jewelry that could become entangled in the moving
parts of the unit.
10. Never lay tools or tooling on the unit where it might interfere with the
operation of the unit.
11. Always wear properly designed impact resistant safety glasses and safety shoes.
12. Be alert for loose, worn or broken parts. When suspected, do not operate the
unit. Report these items and any unusual noise or action of the unit to the proper
authority.
13. Never overload the unit. This is potentially dangerous to both the operator and the
unit.
14. When returning to the unit after an absence, always check the setup. The equipment
may have been used and not replaced correctly.
15. Never operate unit while any personnel are near hazardous areas.
4 KEBBY INDUSTRIES
INTRODUCTION AND SAFETY
KEBBY INDUSTRIES 5
CAUTIONS AND WARNINGS
• Inlet pressure should never exceed 250 psi.
• Operator is recommended to disconnect air prior to changing
Power Heads, Power Crimp, or cleaning.
• Do not place fingers, hands, or anything in pinch areas.
• All hoses must be kept away from sources of heat that may cause
them to melt.
• Hoses must not be a trip hazard.
• Warning labels must be left on the machine.
OCCUPATIONAL SAFETY AND HEALTH ACT
This unit complies with the Occupational Safety and Health Act of 1970
standards where the requirements are specific. The balance of the standards
are complied with as interpreted by Kebby Industries. Since these standards
are continually evolving, and since they are subject to considerable
interpretation by a third party, Kebby Industries cannot guarantee or warrant
compliance with the provisions or standards of O.S.H.A. or any regulations
issued under that statute.
THIS WARNING SIGN IS A REMINDER
THAT THERE IS DANGER TO
PERSONNEL. BE VERY CAREFUL!
CARE MUST BE TAKEN OR EQUIPMENT
MAY BE DAMAGED.
WARNING
CAUTION
INTRODUCTION AND SAFETY
6 KEBBY INDUSTRIES
INDIVIDUAL ACCESSORY ITEMS
Individual accessory items available for purchase.
Power Crimper Unit
P/N A10001
Regulator Assembly
P/N A10002
SS Regulator Assembly
P/N A10003
Air Supply Hose
P/N A10007
Air Supply Hose
P/N A10008
Air Supply Hose SS Braided
P/N A10009
Power Crimper Stand
P/N A10010
Stainless Steel Base Model
P/N A10010-1
Foot Pedal Assembly w/ hose
P/N A10011
Hanger Assembly
P/N A10012
Verification Gauge Assembly
P/N A10013
Lubricating Grease
P/N A10024
Inter-Changeable Crimping and
Decapping Heads available for
a wide variety of cap sizes and
styles from 7.5mm to 32mm.
ASSEMBLY
KEBBY INDUSTRIES 7
FIGURE 1-1 KEBBY POWER CRIMP AND ACCESSORIES
NUMBER QTY PART NUMBER DESCRIPTION
1 1 A10001 POWER CRIMP
2 1 POWER CRIMP HOSE ASSEMBLY
1 A10007 POLYURETHANE SELF-STORING
HOSE ASSEMBLY
1 A10008 POLYURETHANE STRAIGHT
HOSE ASSEMBLY
1 A10009 BRAIDED STAINLESS STEEL
HOSE ASSEMBLY
3 1 A10011 FOOT PEDAL ASSEMBLY
4 1 A10005 SUPPLY AIR HOSE ASSEMBLY
5 1 A10002 GAUGE/REGULATOR ASSEMBLY
6 1 A10010 POWER CRIMP STAND ASSEMBLY
7 1 A10013 AIR PRESSURE VERIFICATION
ASSEMBLY
KEBBY POWER CRIMP AND ACCESSORIES
ASSEMBLY
ASSEMBLY INSTRUCTIONS
This manual has been prepared to aid you in the setup
and operation of your KEBBY POWER CRIMP.
The following chapter will guide you through the assembly.
STEP 1: Connect the Power Crimp Hose Assembly to the Power Crimp as follows:
Step #1: Install the hose fitting onto the Power Crimp adapter.
Step #2: Place a 1/2” open-end wrench on the adapter of the Kebby Power
Crimp. Hold the 1/2” wrench stationary and tighten the hose fitting.
NOTE: Do not over tighten the fitting. Minimum pressure is needed to
secure the fitting.
FIGURE 1-2
8 KEBBY INDUSTRIES
ASSEMBLY
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Kebby Outils de sertissage
Manuels Outils de sertissage populaires d'autres marques
Milwaukee
Milwaukee M18 Manuel utilisateur
HOGERT
HOGERT HT1P169 Manuel utilisateur
Textron
Textron ESG105L Manuel utilisateur
Tyco Electronics
Tyco Electronics 90035-3 Manuel utilisateur
Emerson
Emerson Klauke ES 20RMCCFB Manuel utilisateur
Continental Refrigerator
Continental Refrigerator PC150HD Manuel utilisateur