KBL 4800a Manuel utilisateur
TANNING DEVICETANNING DEVICE
ASSEMBLY INSTRUCTIONS & MENU SETTINGS
Copyright and Trademark
© Copyright 2018 KBL GmbH
This documentation only covers products manufactured by KBL GmbH. It must not be duplicated, photocopied,
translated or stored without prior special consent by KBL GmbH. Duplication on electronic media or in a machine
readable form, either in whole or in part, is also prohibited.
is a registered trademark of KBL GmbH.
DISCLAIMER
All information given in this document correspond to the status quo at the date of publication but may be subject
to changes. Therefore, we do not accept any liability for, nor do we guarantee the accuracy and/or completeness
of the information.
EXPORT
Technical equipment and versions of the devices are in accordance with the legal prescriptions of the respective
country of destination. Export to the European Union of the KBL products, listed in this guide, or operation of
the systems in these countries, are not permitted. KBL does not accept any manufacturers liability in case this
direction is not adhered to. It is expressly pointed out that any violation of the export/operation prohibition will
involve substantial risks of liability for the exporter and/or operator.
MANUFACTURER
KBL GmbH
Ringstraße 24-26 · 56307 Dernbach · Germany
DISTRIBUTED BY (CONTACT)
Specified in operating instructions
ORIGINAL ASSEMBLY INSTRUCTIONS
Version: MA_4800-5600mod2010_US_G
Date: October 2018
Item no: 0100036561
Tanning Device name [tech.]: 3809 / 4209
Assembly Instructions |KBL 4800α/ 5600α
4
Contents
1. General information .......................................... 5
1.1 About these instructions ............................... 5
1.2 Safety signs................................................... 5
1.3 Signal words.................................................. 5
1.4 Transport ....................................................... 6
2. Safety notes ....................................................... 7
2.1 General safety notes ..................................... 7
3. Installation site & Dimensions.......................... 8
3.1 Dimensions.................................................... 8
3.2 Distances....................................................... 8
4. Assembly............................................................ 9
4.1 Tools and aids ............................................... 9
4.2 Work steps .................................................... 9
5. Connecting the tanning device ...................... 13
5.1 Class I ME equipment ................................. 13
5.2 Connecting the mains voltage..................... 13
5.3 Connecting an external audio source ......... 14
5.4 Level adjustment studio music signal ......... 14
5.5 Operation using different audio sources ..... 14
5.6 Bluetooth connection.................................. 15
5.7 Connecting the channel selection............... 16
5.8 Connecting the external timer..................... 17
5.9 aquaCool and Aroma connections.............. 17
5.10 Initial operation.......................................... 18
6. Service mode ................................................... 19
6.1 Layout of the interior control panel
numbers ...................................................... 19
6.2 Invoking the service menu .......................... 19
6.3 Service menu basics ................................... 20
6.4 Service menu - Overview ............................ 22
6.5 Service codes.............................................. 23
6.6 Service menu - options ............................... 23
Assembly Instructions |6700-6800α/ 7900α5
1. General information
1.1 About these instructions
This manual is intended for use by
• studio operator,
• qualified, trained and authorized service techni-
cians.
Any person handling, mounting or servicing this tan-
ning device must have read and understood these
instruction.
Keep this manual ready to hand at all times.
1.2 Safety signs
This symbol indicates that general haz-
ards exist for the human health.
This symbol indicates that due to elec-
trical tensions hazards exist to the
human health.
This symbol indicates that due to fall-
ing loads hazards exist to the human
health.
This symbol indicates the danger of
pinching.
When assembling heavy components,
you can pinch your fingers or hands.
This symbol indicates the danger of
burns from hot lamps and housing
parts. If the tanning device was oper-
ated before being opened, lamps and
housing parts may be hot.
This symbol indicates that damages
may occur at the tanning device, at the
material or at the environment.
Danger due to leakages.
The tanning device can be damaged by
leaking connections.
• Slide the plastic tube up to the stop into the
quick connector socket.
1.2.1 IMPORTANT INFORMATION
This symbol does not identify safety
notices, but states information for a bet-
ter understanding.
1.3 Signal words
DANGER
• Death or serious injury is imminent.
WARNING
• Death or serious injury is possible.
CAUTION
• Moderate or minor injury is possible.
Assembly Instructions |6700-6800α/ 7900α
6
1.4 Transport
WARNING
Overturning load
Danger of being crushed by heavy parts
of the equipment.
• Keep the safety distance to the trans-
port machine.
• Do not walk under the load.
• Wear safety shoes.
1.4.1 TRANSPORT BY FORKLIFT TRUCK
During transport the tanning device may
be damaged when using forklift forks that
are too short.
• Use only sufficiently long forks.
The tanning device is mounted on a pallet.
• Insert the forks carefully into the openings of the
pallet.
• Lift the load by a few centimeters.
• Transport the load carefully to the place of
installation.
1.4.2 OTHER MODES OF TRANSPORT
If a forklift truck cannot be used for transport, the
tanning device must be partially disassembled and
the parts must be transported individually to the
place of installation, e.g. using a dolly. Depending
on the weight of the components, lifting them might
require several people.
Assembly Instructions |6700-6800α/ 7900α7
2. Safety notes
2.1 General safety notes
• Follow all instructions given in this manual and all
other documents enclosed with the tanning device.
In addition, observe all relevant statutory provi-
sions and regulations, also those applicable in the
country of operation.
• The tanning device must only be installed and
assembled by qualified, trained and authorized
service technicians.
• Arbitrary modifications or conversions of the tan-
ning device are not permissible.
• Observe all danger signs and safety notices
attached to the tanning device.
• Safety signs must not be removed, and safety
equipment must not be disabled or removed.
• The tanning device must only be operated when in
perfect working condition.
• Never operate the tanning device with the outer
covering removed or with the acrylic panes
removed.
• This tanning device must be operated with an
external timer that is listed in compliance with UL
917.
• The canopy is not designed to carry
additional loads. In particular, during
installation the canopy must not be
charged with additional loads.
• Before carrying out any work, the tanning device
must be disconnected from the mains voltage.
DANGER
Live parts
Danger of life or fatal injury due to electric
shock when touching live parts.
• Switch neutral
• Secure against reconnection
• Check for neutrality
• Ground and short-circuit
• Cover or shield any adjacent live parts or
components
CAUTION
Hot device parts
Danger of burns from hot lamps and
housing parts. If the tanning device was
operated before being opened, lamps
and housing parts may be hot.
• Wait until the tanning device has
cooled down.
CAUTION
Danger of pinching
When assembling heavy components,
you can pinch your fingers or hands.
• Wear assembly gloves.
• Be careful when handling heavy com-
ponents.
Assembly Instructions |6700-6800α/ 7900α
8
In dry rooms (booths) with sufficient airing.
• Even floor with sufficient load capacity
• Relative humidity: ≤70 %
• Room temperature ≤30 0C (86 0F)
• Minimal room height (4800α) 74,02 and
(5600α) 85,04 inches
• Only on a non-combustible basement
• Connection height of the exhaust air shaft, with
and without hot air recirculation (4800α) 61,54 and
(5600α) 70,87 inches.
3.1 Dimensions
3.2 Distances
3. Installation site & Dimensions
4800α
4"
0"
4"
53,94“
74,02"
≈61,54"
91,74“
86,62“
56,70"
67,33"
5600α
58,27“
85,04"
70,87"
91,74“
86,62“
~56,70"
~70,87"
Assembly Instructions |KBL 4800α/ 5600α9
4. Assembly
4.1 Tools and aids
①Standard phillips screwdriver (PH2)
②Screwdriver 5 mm
③Socked wrench, hexagon socket 6 mm
④Cordless screwdriver & bit set
1. Open the bed part and disconnect all cable connec-
tions between the beth and the canopy as well as all
cable connections between beth and front part.
2. Remove the 6 knurled-head screws as it shown in the
illustration. 2 screws on each side and 2 in the middle.
4.2 Work steps
• Be careful! Do not damage the acrylic and
plastic parts. Handle these parts with the
necessary precaution.
• Do not use safety bolts for transportation
lock.
The canopy is not designed to carry additional
loads. In particular, during installation the canopy
must not be charged with additional loads.
6
Assembly Instructions |KBL 4800α/ 5600α
10
3. Remove the front part forward. Do this with the help
of a second person.
• Be careful! Do not damage the cable
connections.
• Place the front part at a save place.
Inside downwards!
5. Removing the bed part. Do this with the help
of a second person.
6. Lower the canopy pane.
7. Turn the two canopy security screws M8 x 40
counter-clockwise 3-4 turns.
Remove the two lateral seals al the left and right hand
side. Remove the lower half of the chrome crescent at
the foot area.
Position of the secu-
rity screw beneath the
facing.
4. Removing the bed part.
Remove the bed pane and open the bed.
Dismantle the two damper (LHS & RHS). Close the
bed and unscrew the 4 phillips screws M6 x 20
at the two bed hinge-joints.
RHS
RHS
6
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels KBL Lit de bronzage
KBL
KBL megaSun 6700 a business Manuel utilisateur
KBL
KBL megaSun 5600 Guide de l'utilisateur
KBL
KBL megaSun 4500 Series Manuel utilisateur
KBL
KBL MegaSun 7000a Manuel utilisateur
KBL
KBL megaSun space 2000 Manuel utilisateur
KBL
KBL MegaSun 4800 Manuel utilisateur
KBL
KBL megaSun P9 Manuel utilisateur
KBL
KBL mon amie Manuel utilisateur
KBL
KBL megaSun 5800 Manuel utilisateur
KBL
KBL pureEnergy T230 W Instructions d'utilisation et d'installation
KBL
KBL 3500 Manuel utilisateur
KBL
KBL beautyShaper Manuel utilisateur
KBL
KBL mon amie Manuel utilisateur
KBL
KBL MegaSun 4800 Manuel utilisateur
KBL
KBL mehaSun pureENERGY 5.0 Manuel utilisateur
KBL
KBL megaSun 7900 Alhpa Manuel utilisateur
KBL
KBL megaSun 7900 Alpha Manuel utilisateur
KBL
KBL MegaSun 4800 Manuel utilisateur
KBL
KBL megaSun 5600 Manuel utilisateur
KBL
KBL Tower mon amie Manuel utilisateur
