KAYAKS2FISH NEXTGEN10 Manuel utilisateur
Welcome 3
Introduction 3
Included Equipment 4
Paddle 4
Paddle leash 4
Vantage Aluminium Seat 4
One large centre console with a lid 4
Scupper plugs 4
360° Rod holder 5
Paddle Holder strap 5
Toggle Handles 5
Inbuilt rod holders 5
Rear Bungee cord 5
Installation guides 6
Important things to check before you go kayaking 8
Kayaking checklist 9
Vantage Aluminium seat 6
Rudder system 6
360° Rod holder 7
Paddle lock 7
Paddle leash 7
How to install and use a Kayaks2Fish Sit on top trolley 8
Kayaking Gear 9
Clothing 9
Essentials 9
Safety 9
Fishing gear 9
Accessories 9
Transportation 10
Roof racks 10
Soft roof racks 10
How to load a kayak by yourself 10
How to strap a kayak to a set of roof racks 11
Roof rack accessories 11
J-Racks 11
Kayaks2fish Universal Kayak carrier 11
Stacking 11
Maintenance 12
Washing your kayak 12
Warped plastic 12
Give Your Kayak a Check-up 12
Storage solutions 13
Basic Safety Tips for Kayaking 14
How to flip your kayak 15
How to get back on a Sit-On-Top 15
Warranty 15
Spare parts 15
FAQ 16-18
Kayak Hoist system 13
Kayak Cover 13
Kayak stands 13
Wall racks 13
WELCOME!
INTRODUCTION
Welcome to the KAYAKS2FISH family. We hope you enjoy this kayak and the adventures it may bring.
For 10 years, KAYAKS2FISH has focused on one thing — allowing paddlers of any skill level to enjoy
the thrill that comes from being surrounded by water and nature.
Visit our website at any time for more information
https://k2f.com.au/s/clL
This guide will take you through the components of the NextGen 10, installation guides
and tips and tricks to make your kayaking trip safe and enjoyable.
https://k2f.com.au/s/clM
Visit our blog for tips and tricks when it comes to kayaking
https://k2f.com.au/s/cmB
Traction Pads for the NextGen 10 can be found here
Some facts about the NextGen 10 Fishing Kayak.
The NextGen 10 is made from High-density polyethylene (HDPE).
It has a user capacity of 130Kg and an overall weight capacity of 175Kg.
The NextGen 10 weighs 23Kg and is 3.1 Meters long.
The hull shape is flat which helps the stability of the kayak.
The NextGen 10 comes with a Five-year hull warranty.
Much easier to stand up in as it has a dedicated stand-up area that is purposely
designed to provide increased balance when standing and can fit traction pads.
INCLUDED EQUIPMENT
Paddle
The paddle that comes with the NextGen 10 fishing kayak package is
a lightweight 2 piece paddle. It is extendable up to 2.5 metres and
can be feathered depending on your preference. The paddle has the
feature that it floats when joined together.
Paddle leash
The stretchy red cord that comes with the NextGen 10 is a useful tool to
keep the paddle attached to the kayak so in the event, you or a young
family member kicks the paddle overboard you will not have it floats away.
Vantage Aluminium Seat
The Aluminium Vantage seat provides a comfortable,
padded ride. The breathable mesh fabric dries quickly,
keeping you and your seat dry!
Scupper plugs
The drainage holes in the kayak are also known as scupper holes.
The purpose of these holes is to add rigidity to the kayak's hull and to
also allow water to drain from the hull of the kayak. The black plugs that
come with the NextGen 10 fishing kayak are the plugs for these holes.
They are not required to be in for operation but are recommended by
Kayaks2fish to be kept in while out on the water as not having them in
can reduce the weight capacity of the kayak.
One large centre console with a lid
The NextGen 10 comes standard with a large centre console storage area
and a lid that includes a built-in brag mat. While only water-resistant they
will handle the normal splashing that would occur when out on the water.
We recommend a small drybag for your valuables.
360° Rod holder
The NextGen 10 fishing kayak comes standard
with the Kayaks2Fish 360° swivel rod holder.
Paddle Holder strap
The NextGen 10 fishing kayak comes with 2 built-in paddle holders
on either side of the kayak under the handles.
Toggle Handles
The NextGen 10 fishing kayak comes with two comfortable toggle handles
which make carrying or using the Sit-On-Top kayak trolley much easier.
Rear Bungee cord
The NextGen 10 fishing kayak comes with a rear storage bungee cord to
strap down any cooler boxes or gear you want in the back of the kayak.
Inbuilt rod holders
The NextGen 10 fishing kayak comes with 4 inbuilt rod holders to make
it a simple task to transport up to 4 fishing rods at a time.
INSTALLATION GUIDES
Place the seat in the
allocated grooves.
Using the bungee cord underneath
the seat strap, loop the
bungee cord over the clip.
1 2
Connect to the rear
eyehooks to secure the seat
3
Insert the rudder into the steel
ring at the back of the kayak.
Secure the rudder onto the
back with the included steel pin.
1 2
Set the rudder into the groove
to ensure it is sitting in the center.
3
Feed the cord through the hole on
either side of the rudder assembly.
Pull the cord until the top of
the foot pedal is in line with
the bottom of the pedal.
4 5
Wrap the remaining cord around
the rudder assembly and tie it off.
6
VANTAGE ALUMINIUM SEAT
RUDDER SYSTEM
https://k2f.com.au/s/clN
https://k2f.com.au/s/clP
360° ROD HOLDER
Here is a link to an instructional video of the Rod holder installation
Step 1
Screw the 360° rod holder base onto the preassigned
mounting area.
Step 2
Insert the rod holder tube into the mounting base
and turn until it locks in.
To swivel the rod tube, just lift the tube slightly and twist.
PADDLE LOCK
Here is a YouTube video demonstrating
To tighten the paddle lock,
Twist the paddle locking tab clockwise.
PADDLE LEASH
Disconnect
the paddle end
of the paddle leash.
1
Disconnect
the paddle
into two pieces.
2
Place the disconnected
paddle into the
paddle leash.
3
Reconnect the
paddle leash
and paddle.
4
HOW TO INSTALL AND USE A KAYAKS2FISH SIT ON TOP TROLLEY
Here is a YouTube video demonstrating
Step 1 Slide the trolley prongs onto the main pole with the prong with
the attached strap going on first.
Step 2 Slide on the black ring, align the holes, then use the bolt and nut
to secure.
Step 3 Insert the spring clip into the main pole until the button pops up.
Step 4 Install end cap.
Step 5 Screw on the black knob hand screws.
Step 6 Install the wheels by pressing the button down, once in all the way,
the wheels will be locked in place.
How to install the Kayaks2Fish Sit on top trolley
How to use the Kayaks2Fish Sit on top trolley
Step 1 Remove the scupper plugs from the kayak.
Step 2 Adjust the scupper poles in line with the supper holes of the kayak.
Step 3 Place the kayak on the side.
Step 4 Insert the scupper poles as far as they can go into the scupper holes.
Step 5 Turn the kayak the right way up.
Step 6 Strap the kayak down to the Sit-On-Top trolley.
WARNING:
Follow the manufacturer's instructions.
Do not use the trolley unless all components are correctly fitted and adjusted.
Do not use the trolley if any part is broken, torn or missing.
Do not use the trolley on a kayak exceeding the length/weight limit.
The trolley is not for highway use.
Keep away from children when installing.
https://k2f.com.au/s/clQ
IMPORTANT THINGS TO CHECK BEFORE YOU GO KAYAKING
Ensure you have all drainage plugs before you head out.
Ensure all fittings and fixtures are tight.
Give the hull a once over to check for any cracks or deformities.
Check the weather forecast.
Ensure you have first aid supplies.
Ensure you have a dry storage bag for your valuables.
Ensure you have told someone where you are going and when you are expected back.
KAYAKING CHECKLIST
A QUICK LIST TO HELP WITH WHAT TO TAKE OUT KAYAKING.
KAYAKING GEAR
PADDLE
PADDLE LEASH
DRY BAG
ANCHOR KIT
KAYAK TROLLEY
SCUPPER PLUGS
SEAT / CHAIR
CLOTHING
SPF RATED SHIRT
HAT
SUNGLASSES
WATER SHOES
PADDLING GLOVES
QUICK-DRY PANTS
RAINCOAT
FACE SHIELD
ESSENTIALS
INSECT REPELLENT
SUNSCREEN
FIRST AID KIT
DRINKING WATER
SNACKS
WET WIPES
FISHING LICENSE
MOBILE PHONE
SAFETY
LIFE JACKET
HIGH VISIBILITY FLAG
SIGNAL MIRROR
EMERGENCY POSITION
INDICATING RADIO
BEACON (EPIRB)
ELEVATED LIGHT POLE
AIR-HORN
GPS
TORCH
FISHING GEAR
LANDING NET
MICROFIBER CLOTH/TOWEL
ROD-LEASH
ROD HOLDERS
FISH-GRIP
MEASURING DEVICE
CUTTING BOARD
COOLER BOX
CRATE
TACKLE BOXES
PLIERS
ROD SLEEVES
POCKET KNIFE
BAIT BUCKET
FILLET KNIFE
ZIP LOCK BAGS
ACCESSORIES
TROLLING MOTOR
BATTERIES (CHARGED)
TROLLING MOTOR
MOUNTING BAR
SCREWDRIVER
GOPRO
FISH-FINDER
OUTRIGGERS
SUNSHADE
Table des matières
Autres manuels KAYAKS2FISH Bateau
Manuels Bateau populaires d'autres marques
Raymarine
Raymarine ST70 Instrument Manuel utilisateur
Pro-Line Boats
Pro-Line Boats Pro Line 19 Sport Manuel utilisateur
Jeanneau
Jeanneau CAP CAMARAT 8.5 CC Manuel utilisateur
Tiara Yachts
Tiara Yachts C49 2024 Manuel utilisateur
Monterey Boats
Monterey Boats Sport Yacht 330 Manuel utilisateur
J
J 105 Manuel utilisateur
PURSUIT
PURSUIT OS 335 Manuel utilisateur
Boston Whaler
Boston Whaler CONQUEST 345 Manuel utilisateur
Jeanneau
Jeanneau SUN ODYSSEY 41 DS Manuel utilisateur
Meridian
Meridian 490 Pilothouse Manuel utilisateur
Advanced Elements
Advanced Elements AdvancedFrame Expedition AE1009 Manuel utilisateur
Robo Marine Indonesia
Robo Marine Indonesia GEOMAR Manuel utilisateur
