KATEK TeleAlarm EV-04 Manuel utilisateur
EV-04 Personal Mobile Alarm System
Reference Manual
EV-04_RM_EN_V1.1_ 2021.12
en Reference Manual
THIS PAGE IS LEFT INTENTIONALLY BLANK
EV-04 Reference Manual Table of contents | en 2
EV-04_RM_EN_V1.1_ 2021.12_Final © TeleAlarm SA
Table of contents
1 General description ........................................................ 3
1.1 Used warnings and symbols .......................................................... 3
1.2 Presentation of the whole system .................................................. 3
1.3 EV-04 Personal Mobile Alarm System – Setup .............................. 4
1.4 Charging base DS3 – Setup ........................................................... 4
2 ParamEdit software ........................................................ 5
2.1 “System Info” tab ............................................................................ 5
2.2 “Contact Number” tab ..................................................................... 6
2.3 “Tracking Settings” tab ................................................................... 7
2.4 “Buttons/Phone Settings” tab ......................................................... 9
2.5 “Function Settings” tab ................................................................. 11
2.6 “Alert Settings” tab ........................................................................ 13
2.7 “Alarm Clock” tab .......................................................................... 15
2.8 “Voice Prompt Setting” tab ........................................................... 16
2.9 “Beacon Setting” tab ..................................................................... 17
2.10 “WiFi Setting” tab .......................................................................... 18
2.11 “Home WiFi” tab ........................................................................... 19
EV-04 Reference Manual General description | en 3
EV-04_RM_EN_V1.1_ 2021.12_Final © TeleAlarm SA
1 General description
1.1 Used warnings and symbols
Depending on the hazard level, the warnings and notes used in this manual have the
following meaning:
1.2 Presentation of the whole system
The EV-04 is an advanced personal emergency location device, for the elderly, disabled, or
lone worker, keeping families connected with tracking information and voice functionality.
It supports various 4G bands and falls back to 3G/2G when there is no 4G coverage.
When pressing the SOS button, the EV-04 sends an SMS message to the first recipient
with complete location details. Then, a hands-free call takes place. If the recipient does not
answer the call, the device will proceed with the next recipient set in the call sequence.
Up to 10 recipients can be defined.
A built-in 3D G-sensor can be used to trigger a “no movement alarm” or a “fall alarm”.
NOTICE
Means that damage to the equipment or an undesired condition may occur if the
recommended precautions are not taken.
INFO
General notes and additional information.
4 en | General description EV-04 Reference Manual
© TeleAlarm SA EV-04_RM_EN_V1.1_ 2021.12_Final
1.3 EV-04 Personal Mobile Alarm System – Setup
1. Insert the nano SIM card into the EV-04.
2. Connect the charging base DS3 to your computer by USB.
3. Place the EV-04 on the charging base DS3.
4. Open the ParamEdit software.
5. Click ‘Open EVD’.
6. Click ‘Read All’.
7. Set the parameters you want – see below ’ParamEdit software’ information.
8. Click ‘Save All’.
9. Click ‘Close EVD’.
1.4 Charging base DS3 – Setup
(to use it as an indoor beacon for indoor location)
1. Connect the charging base DS3 to its power supply.
2. Place the set-up EV-04 on the charging base DS3.
3. Set geographical coordinates of the charging base DS3.
- Define the exact location using a mobile phone GPS.
- Send the following SMS to the EV-04: BL<Latitude>,<Longitude>
(e.g. BL47.105635,6.834498)
- The EV-04 replies “Set BLE location ok”.
Warning:
Remove the SIM card password beforehand, using a mobile phone.
EV-04 Reference Manual ParamEdit software | en 5
EV-04_RM_EN_V1.1_ 2021.12_Final © TeleAlarm SA
2 ParamEdit software
2.1 “System Info” tab
Password (for SMS Command)
Set this parameter to ON and define a password to protect the unit against unwanted
modification.
Time Zone
Set the current local time. E.g. Central European Time (CET: UTC+01:00), Western
European Time (WET: UTC00:00).
No Disturb Time
This function prevents the unit from making sounds during a specific period.
SMS Prefix
This function provides the option to add further info to the SMS head message.
Locale
Allow the user to select the synthetic voice language.
6 en | ParamEdit software EV-04 Reference Manual
© TeleAlarm SA EV-04_RM_EN_V1.1_ 2021.12_Final
2.2 “Contact Number” tab
A1 to A10
Call up to 10 recipients.
Receive SMS
Select to receive SMS messages.
Receive Call
Select to receive phone calls.
Switch
Turn on to activate the recipient.
EV-04 Reference Manual ParamEdit software | en 7
EV-04_RM_EN_V1.1_ 2021.12_Final © TeleAlarm SA
2.3 “Tracking Settings” tab
The information “Unit: S/M/H” must be set in seconds.
Working Mode
To select tracking mode.
►Mode 1 – Energy saving mode: The device only sends data to the server and enables
the GPS/WiFi/BLE when an event occurs (e.g. alarm). No need to set time interval.
►Mode 2 – Standard tracking: The device only sends data to the server according to
the defined time interval and always stays online. The user needs to set the reporting
time to the server for when the device is moving and not moving. GPS/WiFi/BLE are
enabled when the device is moving and disabled when not moving. The GPS is woken
up and the position is updated only when it needs to send data to the server, or when
an alarm needs to be transmitted.
►Mode 3 – Full tracking: The device sends data to the server according to the defined
time interval and always stays online. The user needs to set this interval. GPS is
always enabled.
8 en | ParamEdit software EV-04 Reference Manual
© TeleAlarm SA EV-04_RM_EN_V1.1_ 2021.12_Final
►Mode 4 – Data savings: The device connects the server only at a defined time interval.
The user needs to set reporting time to the server. GPS/WiFi/BLE are only enabled
when data are sent.
►Mode 5 – Mobile off: The device connects the server at a defined time interval and
between each interval the mobile phone is offline. The user needs to set this interval.
GPS is only enabled when data are sent. During offline periods, the device is unable to
receive calls and text message. GPS/WiFi/BLE are only enabled when data are sent.
►Mode 6 – Enhanced tracking: Same as mode 2 with improved tracking performance.
As soon as motion is detected, the GPS is woken up and its position is thereafter
continuously updated. Which saves time when the position has to be transmitted.
Heartbeat interval
To check the server connection at regular interval (only applicable for modes 1, 2 and 3).
Value range: 60 to 86,400 seconds. The heartbeat packet function is used to keep the
Transmission Control Protocol (TCP) connection open when the interval of scheduled
GPRS reporting is long.
Continuous locate
Continuous locate is only activated when an alarm is triggered, such as the SOS alarm or
fall alarms. After the defined duration time is finished, the unit goes back to normal working
mode. For example, if the time interval is set to 10 seconds, and the duration time is set to
300 seconds, then the device will keep sending reports every 10 seconds to the “server IP”
defined on the same page, for a period of 300 seconds.
Server
If a specific server is used, it can be set here.
SMS URL
SMS message link format. No changes are necessary.
EV-04 Reference Manual ParamEdit software | en 9
EV-04_RM_EN_V1.1_ 2021.12_Final © TeleAlarm SA
2.4 “Buttons/Phone Settings” tab
The information “Press Unit: 0.1s” must be set in tenths of a second.
The information “Unit: S/M/H” must be set in seconds.
Buttons
Define “SOS” and “CALL 1” buttons behaviour.
1. Enable or disable.
2. Long press or double click.
3. Synthetic voice and/or vibration.
4. Long press time/double click time (e.g. 30 means long press 3 seconds or double click
within a period of 3 seconds to activate).
5. Call sequence (SOS standard)/single recipient (Auth 1 … Auth 10).
Autres manuels pour TeleAlarm EV-04
1
Table des matières
Autres manuels KATEK Système de sécurité
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur