KAT Multipad KTMP1 Manuel utilisateur

Owner’s Manual

ktmp1

Electronic Drum/Percussion Pad Sound Module

INFORMATION FOR YOUR SAFETY!

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC COMPLIANCE NOTICE

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and if not used in accordance with the instructions, may

cause harmful interference to radio communications and there

is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures: reorient or relocate the receiving antenna, increase

the separation between the equipment and receiver, connect

the equipment into an outlet on a circuit different from that of

the receiver. Consult the dealer or an experienced radio/TV

technician if help is needed with interference.

NOTE: FMIC will not be responsible for unauthorized equipment

modications that could violate FCC rules, and/ or void product

safety certications.

CAUTION

The normal function of the product may be disturbed by

Strong Electro Magnetic Interference. If so, simply reset

the product to resume nor ration by following the owner’s

manual. In case the function could not resume, please use

the product in other location.

CAUTION

Changes or modications not expressly approved by the

party responsible for compliance could void the user’s au-

thority to operate the equipment.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe place for future reference.

Power Supply

Please connect the designated AC adaptor to an AC outlet of

the correct voltage.

Do not connect it to an AC outlet of voltage other than that for

which your instrument is intended.

Unplug the AC power adaptor when not using the instrument,

or during electrical storms.

Connections

Before connecting the instrument to other devices, turn off the

power to all units. This will help prevent malfunction and / or

damage to other devices.

Location

Do not expose the instrument to the following conditions to

avoid deformation, discoloration, or more serious damage:

• Direct sunlight

• Extreme temperature or humidity

• Excessive dusty or dirty location

• Strong vibrations or shocks

• Close to magnetic elds

Interference with other electrical devices

Radios and televisions placed nearby may experience

reception interference. Operate this unit at a suitable distance

from radios and televisions.

Cleaning

Clean only with a soft, dry cloth.

Do not u s e pa i nt thinner s , solve nt s , cle a n i n g uids, or chemic a l -

impregnated wiping cloths.

Handling

Do not apply excessive force to the switches or controls.

Do not let paper, metallic, or other objects into the instrument. If

this happens, unplug the AC adaptor from the wall outlet. Then

have the instrument inspected by qualied service personnel.

Disconnect all cables before moving the instrument.

Contents

1. Overview 3

2. Panel Description 3

2.1 Front Panel Description 3

2.2 Rear Panel Description 4

3. Basic Operations 5

3.1 Adjust the pad voice tuning 5

3.2 Adjust the reverb level 5

3.3 Assign an instrument to a pad 5

3.4 Adjust the panning of pad voices 6

3.5 Adjust the sensitivity of a pad 6

3.6 Adjust the level of a pad 6

3.7 Adjust the midi note of a pad 7

3.8 Assign a pad to HI-HAT pad control 7

4. Appendixes 8

4.1 Voice List 8

4.2 MIDI Implementation Chart 9

1. Overview

The KAT KTMP1 is a self-contained electronic percussion instrument with four drum pads, 50 sounds, audio and

trigger I/O. The product is mountable using the included Module Mount or a standard snare drum stand for use in

drum, percussion, and other performance setups.

The following is a list of the key features of the design:

• Portable compact drum pad unit with 50 high quality sounds

• Affordable and extremely versatile

• Four natural feel velocity sensitive rubber pads

• Hi-Hat and Bass Drum Pedal input allows you to play this as a drum kit

• Sounds can be tuned to your preference as well as panning and reverb control

• USB and MIDI output allows for PC connectivity to play parts right into your DAW or trigger external sound sources

• Ideal for stage and studio use

2. Panel Description

2.1 Front Panel Description

1. Power Button:

Press the button to turn the power on/off

2. Drum Pad LED Display:

Indicates the pad you want to adjust

3. [Value +] and [Value -] buttons:

Adjust the parameters, such as voice number, level, pan, tune, reverb, sensitivity, midi note

4. LED Display:

2-Digi-LED

5. [SELECT +] and [SELECT -] buttons:

Select the (mode) parameter you want to adjust

6. Mode LED Display:

Indicates the mode you want to adjust

7. Volume knob:

Adjust the main volume

8. Drum Pads:

4 drum pads

345

AUTO POWER OFF:

The digital drum will automatically turn off the power if there is no operation after 30 minutes.

Press the [SELECT +] and [SELECT -] buttons and then turn on the power to switch off the auto power

off function. It will display “oF” briey.

2.2 Rear Panel Description

9. [PHONE] Jack:

Connect to headphone.

10. [LINE OUT] Output:

Connect to external AMP.

11. [HI-HAT PEDAL] Jack:

Connect to a HI-HAT Pedal controller. (KAT KT-HC1 Pedal - Sold Seperately)

12. [KICK] Jack:

Connect to external kick trigger using 1/4 mono cable.

13. [KICK SEL] Switch:

Select the kick style, piezo or switch. (KAT Bass Drum Trigger - Sold Seperately)

14. [MIDI OUT] Jack:

Connect to other MIDI DEVICE.

15. [USB] Jack:

Connect to a computer that utilizes USB 2.0 (Note - USB 3.0 may not be compatible.)

16. [DC IN] Jack:

DC IN 9V

12 15

Typical Plug-in Scenarios

Electrical Power

Supply

(supplied)

USB 2.0 Data

Output

Headphones

Speakers, PA,

Mixing

Console,

Direct Box,

Monitors

Hi-Hat Controller

Pedal (KT-HC1 sold

separately)

Bass Drum Trigger

Pedal

(sold separately)

MIDI Output to

Computer via Auido

Interface,

Keyboard

Controller,

Pad Controller,

Drum Machine

3. Basic Operations

3.1 Adjust the pad voice tuning

Press: [SELECT+] or [SELECT-] button to select the tune mode, the TUNE LED will light up, when striking a

pad, the 2-Digi-LED will display the tune level, press the [VALUE +] or [VALUE -] to adjust the tune level.

[-4,-3,-2, -1, 00, 01, 02,03,04]

The display is:

3.2 Adjust the reverb level

Press: [SELECT+] or [SELECT-] button to select the reverb mode, the REVERB LED will light up, the

2-Digi-LED will display the reverb level, press [VALUE +] or [VALUE -] to adjust the reverb level. [0~10]

The display is:

3.3 Assign an instrument to a pad

Press: [SELECT+] or [SELECT-] button to select the pad assign mode, the ASSIGN LED will light up, when

striking a pad, the 2-Digi-LED will display the voice number, press [VALUE +] or [VALUE -] button to adjust

the voice number. [1~48, H1, H2] - *This is a cyclical menu.

The display is:

Note: the midi note will change according to the voice number.

3.4 Adjust the panning of the pad voice

Press: [SELECT+] or [SELECT-] button to select the pan mode, the PAN LED will light up, when striking

a pad, the 2-Digi-LED will display the pan level, press the [VALUE +] or [VALUE -] to adjust the pan level.

[L4,L3,L2, L1, C, R1, R2,R3,R4]

The display is:

3.5 Adjust the sensitivity of a pad

Press: [SELECT+] or [SELECT-] button to select the sensitivity mode, the SENSITIVITY LED will light up,

when striking a pad, the 2-Digi-LED will display the sensitivity level, press the [VALUE +] or [VALUE -]

to adjust sensitivity level. [1~8]

The display is:

3.6 Adjust the volume level of a pad

Press: [SELECT+] or [SELECT-] button to select the level mode, the LEVEL LED will light up, when striking

a pad, the 2-Digi-LED will display the volume level, press [VALUE +] or [VALUE -] button to adjust the level.

[0~10]

The display is:

3.7 Adjust the midi note of a pad

Press: [SELECT+] or [SELECT-] button to select the midi note mode, the MIDI NOTE LED will light up,

when striking a pad, the 2-Digi-LED will display the midi note number, press the [VALUE +] or [VALUE -] to

adjust the midi note number. [00~99]

The display is:

Note: the midi note will change according to the voice number.

3.8 Assign a pad to HI-HAT pad control

1. Enter HI-HAT function:

1.1 Strike a pad (PAD1-4) to be assigned.

1.2 Press [SELECT+] or [SELECT-] button to enter [ASSIGN] mode, the [ASSIGN] LED will light up;

1.3 Press [VALUE+] or [VALUE-] button to select voice number (from 1 to 48,H1,H2).

The pad will be assigned to HI-HAT pad when the voice number is H1 or H2.

The open and close sounds of the Hi-Hat can now be controlled using the KAT KT-HC1

Hi-Hat Controller Pedal. (KT-HC1 Hi-Hat Controller - Sold Seperately)

2. When many pads are assigned to HI-HAT, The HI-HAT function only responds to the last pad

that you assigned. The other pads respond to “Open Hi-HAT” when struck.

Voice List:

No. Name Midi Note

1 Acoustic Bass Drum 1 36

2 Acoustic Bass Drum 2 36

3 Dance Bass Drum 2 36

4 Snare 1 38

5 Snare 2 38

6 Rap Snare 40

7 Cross Stick 1 40

8 Crash 1 49

9 Ride 1 51

10 Tom 1 48

11 Cross Stick 2 40

12 Finger Snaps 26

13 Wet Claps 39

14 Dry Claps 39

15 Triangle Hi 81

16 Triangle Muted 80

17 Cowbell Hi 56

18 Cowbell Mid 57

19 Cowbell Low 55

20 Timbale High 64

21 Timbale Rimshot 65

22 Timbale Low 66

23 Conga High Open 63

24 Conga Low Open 67

25 Conga Slap 62

No. Name Midi Note

26 Bongo High Slap 60

27 Bongo High 59

28 Bongo Low 61

29 Bongo Low Slap 50

30 Cascara 31

31 Maracas 70

32 Vibraslap 58

33 Tabla High 93

34 Tabla Tap 94

35 Tabla Low 95

36 Shaker High 82

37 Shaker Mid 83

38 Sleigh Bells 84

39 Whistle 72

40 Chimes 85

41 Tambourine 54

42 Claves 75

43 High Effects 1 76

44 Low Effects 1 77

45 Timpani 89

46 Disk Jockey 1 90

47 Disk Jockey 2 91

48 Disk Jockey 3 92

H1 Acoustic Hi-Hat 46

H2 Rap Hi-Hat 46

4. Appendixes

4.1 Voice List

Table des matières

Autres manuels KAT Tambour

KAT

KAT KT3 Manuel utilisateur

Manuels Tambour populaires d'autres marques

Yamaha

Yamaha RX-21 Manuel utilisateur

Roland

Roland TD-9K Manuel utilisateur

Sudoku

Sudoku LEXUS Manuel utilisateur

Roland

Roland CR-80 Manuel utilisateur

V-Drums

V-Drums V-Tour TD-9KX2 Manuel utilisateur

Yamaha

Yamaha DTXPLORER Manuel utilisateur

Cherub

Cherub WRW-206 Manuel utilisateur

Opti-Med

Opti-Med JM-D1 Series Manuel utilisateur

Roland

Roland CR-80 Manuel utilisateur

Yamaha

Yamaha DTS70 Manuel utilisateur

Yamaha

Yamaha DTXPRESS Manuel utilisateur

Roland

Roland RM-2 Manuel utilisateur

ATV

ATV aD5 Manuel utilisateur

Alesis

Alesis DM Pro Kit Manuel utilisateur

Roland

Roland TR-808 Manuel utilisateur

Roland

Roland SPD-20 Manuel d'utilisation et d'entretien

Koma Elektronik

Koma Elektronik RH 301 Manuel utilisateur

Roland

Roland TR-8 Manuel utilisateur

KAT multipad KTMP1 Manuel utilisateur

Manuels Tambour populaires d'autres marques