Karma DJ LED233 Manuel
www.karmaitaliana.it
Instruction manual
E
DJ LED233
Disco light eect
3
2
Congratulation for your choice!
Congratulations for your choice! The Karma product you have purchased is the result
of careful planning by specialized engineers . High quality materials have been used
for its construction, to ensure its functioning over time. The product is manufactured
in compliance with strict regulations imposed by the European Union, a guarantee
of reliability and safety. Please read this manual carefully before starting to use the
xture in order to exploit its full potential.
Karma has several products’ accessories that can complete your device. We invite
you to see the whole range of our products by visiting our website: www.karmaitaliana.
it., where you will nd , in addition to all our items, detailed descriptions and further
documents related to the product. We hope that you will be satised with your
purchase and we thank you again for your trust in our brand.
Safety notes
• Keep this User Manual for future reference. If you sell the product to another user, be sure to give this
manual to the next owner.
• Make sure the voltage of the power source used for the product is correct.
• This product is not suitable for outdoor use.
• To avoid the risk of re or short-circuits never expose the xture to rain or moisture.
• Do not operate the product in an ambient temperature higher than 35°.
• In the event of a serious operating problem, stop using the product immediately. Never try to repair the
product, but contact the authorized technical assistance center.
• Repairs carried out by untrained people can lead to damage both to the xture and to persons.
• Make sure the power cord is not damaged.
• Never disconnect the product from the power source by pulling on the cord.
CAUTION:
When you receive the product you have to check carefully that the parcel is
not damaged from shipping or open. Even if the packaging is not damaged
you have to check the product’s conditions within three (3) days from the
reception. For any kind of problem found on the item, it is necessary to
address a claim to the seller and to our oces (also by e-mail), describing
in detail the damage. Any claim received beyond the 3-day time limit, will
not be accepted. It is suggested to save all the packaging, labels, delivery
bill and all that can be useful to solve quickly the problem.
Further informations on: www.karmaitaliana.it
3
2
SAFETY NOTES
• Keep this User Manual for future reference. If you sell the product to
another user, be sure to give this manual to the next owner. Visit our
website to check if any updates are available.
• Make sure the voltage of the power source used for the product is correct.
• This product is not suitable for outdoor use (in presence of moisture)
• To avoid the risk of re or short-circuits never expose the xture to rain or
moisture.
• Do not operate the product in an ambient temperature higher than 40C°.
• In the event of a serious operating problem, stop using the product
immediately. Never try to repair the product, but contact the authorized
technical assistance center. Repairs carried out by untrained people can
lead to damage both to the xture and to persons.
• Make sure the power cord is not damaged.
• Never disconnect the product from the power source by pulling on the
cord.
• Do not connect any kind of dimmer packs.
This symbol alerts you to the presence of not isolated and high voltage parts inside the
device, which could cause electric shock to the user
This symbol alerts you to the presence of important operating and maintenance, in the
manual or in the documentation accompanying the product
5
4
Pictures and plugs
3
A
7
B
12
7
6
5 9
4 8
11
10
C D
2
1
Further informations on: www.karmaitaliana.it
5
4
Connections
Before arranging any connection, make sure that the plug is
disconnected from the mains. All connections should be
madewiththedeviceo.
Mount the light on a stand thanks to the specic bracket (1) and adjust the
tilt as you prefer . The knob (10) allows to fasten it on the desired position.
If you install the xture in a public location or for more safety, you can use a
safety sling (KARM mod. SAFE 3MM) to fasten it to the stands. In this case
use the safety ring (6) on the back of the product
If you mean to use the device in a DMX light installation, connect the input
and output cables to the DMX IN / OUT sockets (4-5)
Connect the power cable to the xture’s socket (8) and then to the 230V
mains. If you want to connect other light eects in daisy chain you can use
the specic socket (9). Don’t conncet more than 5 devices together. If
necessary connect the device to the ground by using the connector (3)
Once completed these steps you are ready to use your light eect.
This product can produce two types of eect: lighting rays (2) and strobo
eect (3). Be careful to position it correctly in order to obtain the best result,
avoiding to cover the lenses (2).
It can also be used in dierent modes:
- Auto mode
- Sound activated mode
- Master / slave mode
- Through infrared remote control
- DMX mode
In the following pages the above modes will be analyzed in detail.
7
6
Instructions
MODALITY PROGRAM DESCRIPTION
Addr A001 - A512 DMX / Slave address
AUtO Pr00 All rotating eects
Pr01 - Pr18 Eects from 1 to 18
S001 - S255 Execution speed
FL01 - FL04 Strobo ash
SOUN Sd00 Eects in sound modality
Sd01 - Sd16 Eects in sound modality 1-16
uEr Soware version
Only if used
with remote
controller
rEd Red
GrEE Green
bLUE Blu
AnbE Amber
St00 - St04 Strobo speed in color mode
OFF OFF
The display (7) and its keys will help you in setting the device and in
choosing the operating mode. The keys B and C allow to choose the
options, while the key D conrms the choice. The key A allows to select
the main functions. Please refer to the chart at page 6 to see the available
modes and the related settings.
Further informations on: www.karmaitaliana.it
7
6
AUTO MODE
Through the display (7) and its keys (A.B,C,D) select one of the two auto
modes (Pr00 or Pr 01 / Pr 018). You can then adjust the eect speed
through the values S001 - S255 and, if you like, the ashing (FL 01- FL 04)
SOUND ACTIVATED MODE
Through the display (7) and its keys (A.B,C,D) select one of the three
“sound” programs (Sd00 or Sd01/Sd16). The device will light on according
to the music rhythm, perceived thanks to the small microphone inside it (11)
MASTER SLAVE /MODE
In this mode you can connect more than one device of the same model
so that they will be synchronized. To do that, the rst unit will operate in
standard way, while all the others (slaves) will be connected to the rst
(master) in daisy chain, using the DMX connectors (4) and XLR cables.
All the units connected to the master must be set in SLAVE mode through
the specic menu.
In this way the slave units will run exactly the same programs as the
master unit.
DMX MODE
In a DMX 512 linking there are 512 channels available.
Each DMX xture uses one or more channels to manage its functions. The
user must assign a starting address to each DMX xture. This address
will indicate the rst channel used on the controller. You have to plan the
starting address choice in order to avoid channels’ overlapping. Otherwise
the xture wouldn’t work correctly.
Example: If you need to connect 3 DMX xtures, each with 10 channels,
the rst unit is to be set on address 1, the second unit on address 11
and the third one on address 21. Anyway you can set the same starting
address on more devices if you wish them to operate in synchrony. DMX
devices are conceived to receive datas through a serial Daisy Chain
connection. With this kind of linking the datas output of a xture is
connected to the data input of the following one. The order of linking of the
devices is not important and it doesn’t aect on how the controller manages
each of them. We suggest to put them in the easiest and most direct
sequence for cable connection. The cable length should not be more than
100mts to avoid interferences with other signals or electric devices. When
you arrange the connections make sure that the xtures and the cables use
Instructions
9
8
OUT
Esempio di collegamento a cascata.
ININ OUTOUT IN
DMXDMX DMX
CENTRALINA
DMX
the polarities indicated in the chart below.
To set the address (from 001 to 512) you want to assign to the unit,
press the menu touch (2) until you the letter “d” appears. Then set the
address with the keys up and down and conrm with enter.
To operate correctly in DMX systems, you have to know the number of
channels available in each xture and the function of these channels.
Here is the chart with the functions of the 4 DMX channels of your new
xture.
CHANNEL VALUE DESCRIPTION
CH 1
0 All OFF
1-13 Rotating eects from 1 to 18
14-255 Static eects from 1 to 18
CH 2 0 - 255 Eect speed from slow to fast
CH 3 0-255 Strobo speed from slow to fast
CH 4
0 Auto mode (CH1-CH3 active)
1-14 Rotating sound eects (da 1 a 16)
15-255 Static sound eects (da 1 a 16)
Instructions
Further informations on: www.karmaitaliana.it
9
8
REMOTE CONTROL MODE
Blackout:
Press to disable any beam. Press again to enable it.
Auto
It enables auto mode. Through the + and - keys you
can choose the desired Sound mode.
Flash
It enables strobo mode.
Through the + and - keys you can choose the desired
ashing speed.
DMX
It enables and disables DMX mode. Press it for about 2
seconds to enable it
Manual
Once pressed the key it will be possible to choose
manually the color of the light beams. To do that you
can act on the keys R,G,B,A,W
+/-
Through the + and - keys you can increase or reduce
the value of DMX, speed and microphone sensitivity.
Jump
It selects the chases from 1 to 16
Color
It selects directly the colors red, green, blue and amber.
In the same way the keys 0-9 select other colours.
Instructions
11
10
Notes
Table des matières
Autres manuels Karma Projecteur
Manuels Projecteur populaires d'autres marques
VIZULO
VIZULO Micro Martin Guide de l'utilisateur
EuroLite
EuroLite LED IP FL-100 SMD Manuel utilisateur
Cooper Wheelock
Cooper Wheelock XB12 Manuel utilisateur
Allen + Roth
Allen + Roth 17624-000 Manuel utilisateur
ADJ
ADJ 4 STAGE PAK Manuel utilisateur
Cooper Lighting
Cooper Lighting EGL91SW233 Manuel utilisateur
