Karel TM142 Manuel utilisateur
ANALOG PHONE USER GUIDE
TM142
II
III
CONTENTS
PARTS CHECKLIST:...................................................................1
INSTALLATION:....................................................................1
TELEPHONE KEYS:....................................................................3
TELEPHONE CONFIGURATION:................................................4
PHONE OPERATION:..................................................................5
SAFETY INSTRUCTIONS:...........................................................7
APPENDIX:........................................................................8
ANALOG PHONE USER GUIDE
1
PARTS CHECKLIST
• 1 base
• 1 line cord
• 1 handset
• 1 handset cord
• 1 user manual
INSTALLATION
Installing the phone
1. Connecting the handset.
2. Connecting the telephone line.
Wall mounting:
1. Rotate the wall mounting knob as shown in the following illustration:
2
2. Install the base unit on the wall and then plug one end of the line cord into the tele-phone
connection socket and the other end into the modular telephone line Jack marked ( )
3. Attach the telephone at the wall as shown in the following gure.
ANALOG PHONE USER GUIDE
3
TELEPHONE KEYS
4
TELEPHONE CONFIGURATION
Note: Immediately change the following factory settings.
Speaker volume level adjustment:
You can adjust the speaker volume level to high, middle, low using the switch on the right
side of your telephone.
Ringer volume level:
The phone will ring when there is an incoming call. You can set the ringer volume to high,
middle or low level. The ringer volume switch is indicated in the following illustra-tion
under A.
Pulse tone setting:
You can select P (PULSE) or T(TONE) dialing mode according to the requirements from
the local telephone operator. The T/P switch is indicated in the following illustra-tion
under B.
Flash time setting:
You can use the Flash feature to access services provided by your telephone operator.
The Flash time is dependent on the local telephone exchange. You can change the set-
ting using the switch indicated in the following illustration under C.
A - Ringer Volume Switch
B - Tone/Pulse Switch
C - Flash Time Switch
ANALOG PHONE USER GUIDE
5
PHONE OPERATION
Mute:
In off-hook state, the user can press the button to activate the mute function.
When (MUTE) is on, the MUTE symbol will appear on the screen. Press the
button to deactivate the mute function and resume normal conversation.
Access telephone operator services:
During conversation, press button to interrupt momentarily the telephone conver-
sation and to access your telephone operator’s services.
Storing / editing a telephone number:
Dialing a memory location:
6
ANALOG PHONE USER GUIDE
7
SAFETY INSTRUCTIONS
Please observe the following instructions:
• Place the phone at the appropriate distance:
• – from sources of heat,
• – from direct sunlight,
• – from other electrical appliances.
• Protect your phone from damp, dust, aggressive liquids and steam.
• Connect the cables only using the sockets provided.
• Connect only approved accessories.
• To clean the phone, use only a slightly damp cloth.
• Do not use your phone in damp rooms (for example, in the bath).
Table des matières
Autres manuels Karel Téléphone
Karel
Karel MS128 Instructions d'utilisation et de sécurité
Karel
Karel FT10 Manuel d'utilisation et d'entretien
Karel
Karel IPV20 Manuel d'utilisation et d'entretien
Karel
Karel NT421 Manuel d'utilisation et d'entretien
Karel
Karel LT200 Manuel utilisateur
Karel
Karel MS224 Instructions d'utilisation et de sécurité
Karel
Karel FT200 Manuel utilisateur
Karel
Karel LT48 Manuel utilisateur
Karel
Karel OP50 Manuel d'utilisation et d'entretien
Karel
Karel FT 15 Manuel d'utilisation et d'entretien
