KanexPro SP-SDIX2 Manuel utilisateur
SP-SDIX2
3G/HD-SDI 1 x 2
High Bandwidth
Distribution Amplifier
User manual
All Rights Reserved VER: 1.1
KanexPro 3G/HD-SDI 1x2 Distribution Amplifier
1
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual
for future reference.
I. Introduction
The KanexPro 1x2 SDI unit can split, re-clock, and amplify SDI source video to 2 SDI outputs providing
full HD 1080p resolution to up to 2 displays simultaneously for faster broadcasting and production.
II. Features
1. Distribute one SDI input to four SDI displays/ monitors
2. Supports SD-SDI (270Mb/s), HD-SDI (1.485Gb/s), 3G-SDI (2.97Gbps) video format.
3. Built-in cable equalization and re-clocking
4. HD resolutions up to 1920x1080@60Hz.
KanexPro 3G/HD-SDI 1x2 Distribution Amplifier
2
5. Supports signal input and output distances of up to 300m for SD signals, 200m for HD signals
and 100m for 3G signals.
6. Supports 5-12V wide voltage input.
III. Package
1. 1x2 SDI Splitter --------------------------------------------------------------------------- 1
2. 5V1A DC Power Supply adapter ------------------------------------------------------- 1
3. Operation Manual ------------------------------------------------------------------------- 1
IV. Specifications
1. Frequency Bandwidth 3Gbps
2. SDI Splitter Input Ports 1 x BNC Female input port
3. SDI Splitter Output Ports 2 x BNC Female output ports
KanexPro 3G/HD-SDI 1x2 Distribution Amplifier
3
4. Power Supply DC 5V 1A
5. ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
6. Dimensions (mm) 70(W) X 145 (D) X 25 (H)
7. Weight 320g
8. Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
9. Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
10. Relative Humidity 20 ~ 90% RH (Non-condensing)
11. Power Consumption (Max) 1.5W
KanexPro 3G/HD-SDI 1x2 Distribution Amplifier
4
V. Operation controls and Functions
Front Panel
1. ON/OFF: Power on/off switch.
2. POWER LED: This red LED illuminate when the device is connected with power supply.
3. LOCK LED: This red LED illuminate when the SDI signal plug in.
KanexPro 3G/HD-SDI 1x2 Distribution Amplifier
5
Rear Panel
1. SDI INPUT: This slot is where you connect the SDI source output from SDI Camera.
2. SDI OUTPUT: These slots are where you connect the SDI displays or monitors with coaxial
cable (RG6).
3. DC 5V-12V:Plug the 5V or 12V DC power supply into the unit and connect the adapter to AC
wall outlet.
KanexPro 3G/HD-SDI 1x2 Distribution Amplifier
6
VI. Application Example
KanexPro 3G/HD-SDI 1x2 Distribution Amplifier
7
For Technical Support: Email to our after-sales department or make a call, please inform us the
following information about your cases.
Product version and name.
Detailed failure situations.
The formation of the cases.
Please Contact KanexPro directly at 888-975-1368 or email us at support@kanexpro.com.
Model: SP-SDIX2
Autres manuels KanexPro Amplificateur
KanexPro
KanexPro SP-HDCAT1X8 Manuel utilisateur
KanexPro
KanexPro AP3DBL Manuel utilisateur
KanexPro
KanexPro AP2DBL Manuel utilisateur
KanexPro
KanexPro SP-HDPOC1X4 Manuel utilisateur
KanexPro
KanexPro SP-HD20-1X24K Manuel utilisateur
KanexPro
KanexPro SP-HDBT1X4 Manuel technique
KanexPro
KanexPro SP-HDPOC1X8 Manuel utilisateur
KanexPro
KanexPro HDSP164K Manuel utilisateur
KanexPro
KanexPro SP-HDCAT1X4 Manuel utilisateur
